Autoclave tape is an adhesive tape used in autoclaving (heating under high pressure with steam to sterilise) to indicate whether a specific temperature...

An autoclave is a machine used to carry out industrial and scientific processes requiring elevated temperature and pressure in relation to ambient pressure...

The following is a list of adhesive tapes with pressure-sensitive adhesives: "Duct tape - Definition and More from the Free Merriam-Webster Dictionary"...

Out of autoclave composite manufacturing is an alternative to the traditional high pressure autoclave (industrial) curing process commonly used by the...

Autoclave moulding is an advanced composite manufacturing process. It is a process that uses a two-sided mould set that forms both surfaces of the panel...

Retrieved 2016-10-24. "When using autoclave we use autoclave tape which changes color to black indicating autoclaving was successful, what is the molecular...

and vacuum, or with an autoclave, to control temperature, vacuum and also hydrostatic pressure. Polymerization in an autoclave is a technique which allows...

Because it melts quickly when heated, Parafilm M is not safe for use in an autoclave. It is also soluble in many organic solvents. Some growers use Parafilm...

but then joined up with Nikki Chapman and Mary Timony to form Autoclave in 1991. Autoclave became known for their math rock styling and released a single...

keyboardist, bassist, and violist. She has been a member of the bands Helium, Autoclave, Wild Flag, and Hammered Hulls, and currently fronts Ex Hex. Timony's...

composite structures built of pre-pregs will mostly require an oven or autoclave to cure. The main idea behind a pre-preg material is the use of anisotropic...

Molding (VARTM) or Vacuum Injected Molding (VIM) is a closed mold, out of autoclave (OOA) composite manufacturing process. VARTM is a variation of Resin Transfer...

water and there is not much pressure build up within the oven, unlike an autoclave, making them safer to work with. This also makes them more suitable to...

laid-up plies of material) and when curing the composite, usually in an autoclave. The PTFE, used here as a film, prevents the non-production materials...

deposited in a storage bin after being contaminated for dry cleaning, autoclaving and/or repair. Some clothing items, such as nitrile gloves and shoe covers...

sharp instruments when removing them from autoclaves/sterilizers or from steam lines that service the autoclaves. Centrifuges, due to the high speed at which...

materials are non-porous and can withstand the heat and pressure of an autoclave, so that they can be properly sanitized before insertion. The typical...

the initial melt, and the assembly is heated again under pressure in an autoclave (oven) to achieve the final bonded product (fully crosslinked in the case...

Composites Part B: Engineering. 43 (3). Ridgard, C. (2009). "Out of autoclave composite technology for aerospace, defense and space structures". International...

processing techniques used to fabricate composites, such as wet hand lay-up, autoclave and resin transfer moulding, require a high amount of skilled labour to...

applied, it is a common practice to criss-cross the vacuum desiccator with tape, or to place it behind a screen to minimize damage or injury caused by an...

commonly used method when extended heat is not a concern is to use an autoclave or pressure cooker. When sterilizing in this way, samples are placed into...

sterilize instruments in absence of an autoclave Kidney dish as a tray for instruments, gauze, tissue, etc. Measuring tape for length, height, head circumference...

on the resin system and its cure characteristics, often the mandrel is autoclaved or heated in an oven or rotated under radiant heaters until the part is...

different limitations involved characteristics of the plaintext and so were autoclaves. The key stream generated by the SZ machines thus had a χ component and...

alternate fiber orientations. The standard Glare grades are cured in an autoclave at 120 °C (248 °F) for 3.5 hours under 11-bar pressure (11 atm; 160 psi;...

included different musicians Erin Smith on guitar, Christina Billotte of Autoclave on drums and bass, and artist Jen Smith (no relation to Erin). Johnson...

bound for Port Qasim in Karachi. It was seized for wrongly declaring an autoclave, which can be used in the launch process of ballistic missiles, as an...

There are four main ways in which such items are usually sterilized: autoclave (by using high-pressure steam), dry heat (in an oven), by using chemical...

Pipe Institute, Inc. 2010. "High pressure adapters/couplings". Parker Autoclave Engineers. Retrieved 3 July 2019. "adapter spool". Schlumberger Oilfield...