BS Fabrications was an engineering company specialising in fabrications for Formula One teams founded by Bob Sparshott, a former engineer at Lotus who...

drove a McLaren of BS Fabrications in the next three races, where he left good impressions. The deal was negotiated when BS Fabrications employees met Piquet...

returned to the championship in 1976 with a Surtees privately entered by BS Fabrications. Although neither car nor driver was considered to be competitive,...

were built to identical standards, although their origins varied. BS Fabrications constructed five cars for the BMW factory team, while cars for other...

Scuderia Italia (1988–1993) British Formula One Racing Team (1977) BS Fabrications (1976–1978) Camoradi International (1959–1961) DW Racing Enterprises...

781S Ford Cosworth DFV 3.0 V8 G 29 Patrick Nève 6 BS Fabrications Liggett Group with BS Fabrications McLaren-Ford M23 M26 Ford Cosworth DFV 3.0 V8 G 29...

and also tried an M26, but now entered by Sparshott's racing outfit, BS Fabrications. After a one-off drive for Ensign at the end of the season, Lunger...

USW MON BEL ESP SWE FRA GBR GER AUT NED ITA USA CAN BS Fabrications Liggett Group/BS Fabrications M23 M26 Ford Cosworth DFV 3.0 V8 G Brett Lunger 13 Ret...

BS 5950 is a withdrawn British Standard for the design, fabrication and erection of structural steelwork. It does not apply to bridges, which are covered...

Brett Lunger 30 DNS 11 DNQ 13 Ret 10 9 Ret 10 11 1978 Liggett Group/ BS Fabrications Ford Cosworth DFV 3.0 V8 G ARG BRA RSA USW MON BEL ESP SWE FRA GBR...

were built to identical standards, although their origins varied. BS Fabrications constructed five cars for the BMW factory team, while cars for other...

Fittipaldi 1–16 29 Ingo Hoffmann 1–2 Chesterfield Racing Liggett Group with BS Fabrications March-Ford 761 Ford Cosworth DFV 3.0 V8 G 30 Brett Lunger 3–5 McLaren-Ford...

conventional afterburner. The PCB flame-holders were highly complex sheet metal fabrications which were difficult to envisage on a 2D engineering drawing. Consequently...

DNQ Liggett Group / BS Fabrications McLaren M23 M26 G Brett Lunger 13 Ret 11 DNQ DNPQ 7 DNQ DNQ Ret 8 DNPQ 8 Ret Ret BS Fabrications Nelson Piquet Ret Ret...

USA Leo Kinnunen DNQ Ret DNQ DNQ DNQ DNQ 1976 Team Norev Racing with BS Fabrications TS19 Ford Cosworth DFV 3.0 V8 G BRA RSA USW ESP BEL MON SWE FRA GBR...

Nelson Piquet, who had raced earlier in the season with Ensign and BS Fabrications, would be joining them in a third car, alongside regular drivers Niki...

Entrant Chassis Engine 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pos. Pts 1979 BS Fabrications McLaren M23 Ford Cosworth DFV 3.0 V8 ZOL OUL BRH MAL SNE THR 5 6th...

Trimmer Melchester Racing McLaren-Cosworth + 3 Laps 15 4 Brett Lunger BS Fabrications McLaren-Cosworth + 3 Laps 7 5 Rupert Keegan Durex Team Surtees Surtees-Cosworth...

BS 7910, guide to methods for assessing the acceptability of flaws in metallic structures, is a British Standard code of practice for the assessment of...

BS EN 13121-3 is European Standard adopted by UK, titled "GRP tanks and vessels for use above ground. Design and workmanship". Design and workmanship is...

Zaborowski 19 Jörg Zaborowski March 761 Ford Cosworth DFV 3.0 V8 3 BS Fabrications 30 Brett Lunger McLaren M26 Ford Cosworth DFV 3.0 V8 5 Theodore Racing...

Vaulx-en-Velin. Norev was the title sponsor of the privateer Formula 1 entry of BS Fabrications in the 1976 F1 championship, in partnership with Surtees. The team...

Arrows A1 Ford Cosworth DFV 3.0 V8 2-9, 11-15 17 Ricardo Zunino 8-14 BS Fabrications 17 Ricardo Zunino McLaren M23 Ford Cosworth DFV 3.0 V8 6 Arrows A1...

three satellite television channels (NHK BS; as well as two ultra-high-definition television channels, NHK BS Premium 4K and NHK BS8K), and three radio...

is on). BS 5295 is a British Standard. BS 5295 Class 1 also requires that the greatest particle present in any sample can not exceed 5 μm. BS 5295 has...

& CRSI Specifications (United States), ACI & RSIC Specifications (Canada) BS Specifications (United kingdom). Rebar detailing is usually assigned to in-house...

performance and design information for galvanizing can be found in BS EN ISO 14713-1 and BS EN ISO 14713-2. The durability performance of a galvanized coating...

accordance with BS 476", its "fire propagation [is] Pass" re BS 476 Part 6, and that its "surface spread of flame [is] Class 1" re BS 476 Part 7 (https://www...

and elevated roadways. The British Standards of practice for falsework, BS 5975:2008, defines falsework as "Any temporary structure used to support a...

119 (7): 989–96. doi:10.1289/ehp.1003220. PMC 3222987. PMID 21367689. Rubin BS, Murray MK, Damassa DA, King JC, Soto AM (July 2001). "Perinatal exposure...