Distributed-element circuits are electrical circuits composed of lengths of transmission lines or other distributed components. These circuits perform...

engineering, the distributed-element model or transmission-line model of electrical circuits assumes that the attributes of the circuit (resistance, capacitance...

A distributed-element filter is an electronic filter in which capacitance, inductance, and resistance (the elements of the circuit) are not localised in...

called the distributed-element model. Networks designed to this model are called distributed-element circuits. A distributed-element circuit that includes...

stage of radios which have a double-tuned amplifier format. Distributed-element circuits often use the component known as a stub. In printed planar formats...

one-eighth of a wavelength. Lumped element circuits can be directly converted to distributed-element circuits of this form by the use of Richards' transformation...

lumped-element model (also called lumped-parameter model, or lumped-component model) is a simplified representation of a physical system or circuit that...

line. Circuits designed according to this approach are distributed-element circuits. Such considerations typically become important for circuit boards...

In electrical networks, a parasitic impedance is a circuit element (resistance, inductance or capacitance) which is not desirable in a electrical component...

processes used to manufacture microstrip circuits is very similar to the processes used to manufacture printed circuit boards and these filters have the advantage...

circuit diagram. This is called a lumped-element circuit model. In other cases, infinitesimal elements are used to model the network in a distributed-element...

& Koul, pp.601-602. A 2-element-kind network is one consisting of only two kinds of elements, that is, LC, RC or RL circuits. The K and J notation originates...

The incremental inductance rule, attributed to Harold Alden Wheeler by Gupta: 101  and others: 80  is a formula used to compute skin effect resistance...

zero). Stubs are often used as resonant circuits in oscillators and distributed element filters. An open circuit stub of length l {\displaystyle \scriptstyle...

Distributed amplifiers are circuit designs that incorporate transmission line theory into traditional amplifier design to obtain a larger gain-bandwidth...

patterns to build circuits such as filters. These circuits, known as distributed-element circuits, are an alternative to traditional circuits using discrete...

used for the same function as these components. Whole circuits, called distributed-element circuits, can be built this way. The method is often used for...

Characteristic admittance is the mathematical inverse of the characteristic impedance. The general expression for the characteristic admittance of a transmission...

also called a picket fence, is a structure used in planar electronic circuit technologies to improve isolation between components which would otherwise...

short-circuit stub. Thus, the designer can match the antenna to the feedline impedance by setting the position of the feed point along the antenna element....

electrical planar transmission line which can be fabricated using printed circuit board technology, and is used to convey microwave-frequency signals. On...

{{Z_{0}}^{2}}{Z_{\mathrm {L} }}}} Both of these structures are widely used in distributed element filters and impedance matching networks. Attenuation distortion Antenna...

The tap point is chosen to achieve an impedance match with the connected circuit. Tuning of the resonator may be achieved by inserting a screw into the...

is a reciprocal component. The transformer is an example of a distributed-element circuit. Analogs of the gyrator exist in other energy domains. The analogy...

Traditional circuits are built from lumped elements – that is, discrete components. However, an alternative is distributed-element circuits, built from...

are important because they allow transmission lines to be analyzed using circuit theory. The equations and their solutions are applicable from 0 Hz (i.e...

such as transmitters, radar sets, and television sets, serving as tank circuits, filters, and impedance-matching devices. They are used at frequencies...

The circuit representation of these elements requires a distributed-element model and consequently calculus must be used to analyse the circuit. The...

Coax for video applications is usually 75 Ω for its lower loss. Ampère's circuital law – Concept in classical electromagnetism Characteristic acoustic impedance –...

passive circuits such as filters, power dividers and directional couplers tend to be constructed as distributed-element circuits. These circuits can be...