Slotted angle (also sometimes referred to as slotted angle iron) is a system of reusable metal strips used to construct shelving, frames, work benches...

The Dexion-style slotted angle or angle iron was also widely copied by other manufacturers using different configurations of slots, different metal thicknesses...

brand particularly associated with the development of the "Dexion" slotted angle steel strip construction system, widely used since the 1950s for domestic...

the simple milled slot of a slotted screw. The Phillips screw design was developed as a direct solution to several problems with slotted screws: high cam-out...

waveguide, and the antenna consists of slots in the waveguide; this is called a slotted waveguide antenna. Multiple slots act as a directive array antenna and...

leading edge of the slotted flap. Any flap that allows air to pass between the wing and the flap is considered a slotted flap. The slotted flap was a result...

Packaging Materials D6255 Standard Specification for Steel or Aluminum Slotted Angle Crates D7478 Standard Specification for Heavy Duty Sheathed Wood Crates...

been stabilized to prevent further movement or distortion. Slotted holes or "T" bolt slots are machined into the surfaces to enable the secure attachment...

management software Dexion - Invented in London by Demetrius Comino, Dexion slotted angle revolutionised adjustable shelving and other forms of racking and storage...

Adjustable shelving made from Dexion steel slotted angle...

two-stroke engine Demetrius Comino (1902–1988) – inventor of Dexion slotted angle steel construction system Peter Cooper (1791–1883) – designed and built...

slot is a spanwise gap in each wing, allowing air to flow from below the wing to its upper surface. In this manner they allow flight at higher angles...

entrepreneur and philanthropist during the 20th century. He invented the slotted angle steel construction system, Dexion, which became widely used internationally...

pitch varies greatly from pitcher to pitcher depending on velocity, arm slot angle, and pressure points of the fingers. The two-seamer is a very natural...

not slip out of the fastener as easily as would a Phillips or slotted driver. (Slotted screws are rarely used in mass-produced devices, since the driver...

A rail-guided system consists of angle iron bolted to the floor down the length of each row. Typically, the angle iron is 4 in × 3 in (102 mm × 76 mm)...

car accident. Demetrius Comino, 85, Australian engineer and inventor (Slotted angle), founded the Comino Foundation, heart attack. Willis Edwards, 85, English...

Camber angle is one of the angles made by the wheels of a vehicle; specifically, it is the angle between the vertical axis of a wheel and the vertical...

railway network Demetrius Comino OBE, engineer, inventor of Dexion steel slotted angle system Edward Dobson (1816/17?–1908), Provincial Engineer for the Canterbury...

Of Slotted Wings" Archived 2012-11-03 at the Wayback Machine Flight, December 22nd 1921, photo page 845 of converted D.H.4 for testing of slotted wings...

require anglers to release captured fish if they fall within a given size range, allowing anglers to keep only smaller (though rare) or larger fish. Slot limits...

waveguide, the slot is usually cut along the centre of the broad wall of the waveguide. Circular waveguide slotted lines are also possible. Slotted lines are...

over the 10 p.m. ET/7 p.m. PT time slot under the branding Fox News Tonight. Prior to hosting The Ingraham Angle, Laura Ingraham had been a guest host...

The Scotch yoke (also known as slotted link mechanism) is a reciprocating motion mechanism, converting the linear motion of a slider into rotational motion...

Assembly of Dexion slotted angle...

In a phased array or slotted waveguide antenna, squint refers to the angle that the transmission is offset from the normal of the plane of the antenna...

Edward Hartley Angle (June 1, 1855 – August 11, 1930) was an American dentist, widely regarded as "the father of American orthodontics". He was trained...

building system offers the 288mm flat bar. It also has two lengths of angles (slotted angle), which are 144mm and 288mm. The next category of parts are plates...

connector mounted at a right angle (so the board would be parallel to the motherboard). One card provided a NuBus slot, while the other was essentially...

protected slot limits. Managers must balance the health of the fishery, trophy fish potential, and desired angler harvest. When an angler is fishing...