which the tire bead sits. When the tire is properly inflated, the air pressure within the tire keeps the bead in this groove. Reducing tire air pressure...

accommodate smaller or larger wheels. The bead loosening system releases the tire bead from the rim of the wheel. The bead loosening system consists of an arm...

tire bead free of the rim at one point, allowing a second lever to be manipulated forward, progressively loosening a larger segment of the tire bead from...

sidewall that retains the tire bead, not the circumferential tension in the bead. Jinkya, A. (10 May 2019). "Industrial Tire Market: Size Estimated To...

bonding of the bead to the rubber. Beads are inflexible and inelastic, and provide the mechanical strength to fit the tire to the wheel. Bead rubber includes...

the tire bead. The bead is a thicker section of rubber, and is reinforced with braided steel cables, called the bead bundle. The surface of the bead creates...

or bead lock is a mechanical device that secures the bead of a tire to the wheel of a vehicle. Tires and wheels are designed so that when the tire is...

which use a separate inner tube, tubeless tires have continuous ribs molded integrally into the bead of the tire that are forced by air pressure into a flange...

diameter of the cylindrical surface on which the tire bead rides. The width is the inside distance between the bead seat faces. The offset is the distance from...

the tire bead in place. However, this type of tire is no longer in general use and the term clincher has transferred to the modern wired-on tire. For...

hooked-bead rims lack the defined bead seat of straight side and Crochet-type rims. The tire is held in position radially by the hook without a bead seat...

tubeless tires running under rated pressure run the risk of breaking their bead. A beadlock can be used to prevent this. Off-road cycle tires, colloquially...

the mold. This shaping process caused the cords in the tire to assume an S-shape from bead to bead. The angle under the tread, the crown angle, stretched...

the tire and tube. In cross-section, the rim is deep in the center and shallow at the outer edges, thus forming a "U" shape that supports the bead of the...

series Bead test, a type of chemical analysis Bead method, a process of cell disruption for releasing biological molecules contained in cells Tire bead is...

bead of the tire being cut when installed with excessive force. Occasionally, a puncture may not "go all the way through" to the inside of the tire....

Tractor tire Racing slick Formula One tires Spare tire Continental tire Natural rubber Butyl rubber 6PPD Bead Beadlock Tread Siping (rubber) Valve stem...

all-terrain tires were fitted to 17-inch wheels; as a rare option for a mass-produced vehicle, Ford offered beadlock wheels to prevent tire bead separation...

distribution within the tire, enabled by the redesigned wheel rim and tire bead. The "TR" was for "tension répartie", since tire stresses were better balanced...

a flat tire. Most bicycle rims are "clincher" rims for use with clincher tires. These tires have a wire or aramid (Kevlar or Twaron) fiber bead that interlocks...

Tire recycling, or rubber recycling, is the process of recycling waste tires that are no longer suitable for use on vehicles due to wear or irreparable...

A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. A TPMS reports real-time tire-pressure information...

× 110 mm) all around. Balloon tires were closer in design to today's tires, with steel wires reinforcing the tire bead, making lower pressure possible...

providing lateral support to eliminate leakage from the tire bead during high speed cornering. The tires are self-cleaning, meaning mud and other materials...

used to measure the tension in spokes. Tire bead jack can be used to install tires on rims, especially when the tire-rim combination is tight. Dishing gauge...

Tire balance, also called tire unbalance or tire imbalance, describes the distribution of mass within an automobile tire or the entire wheel (including...

measurement. The tire is first centered, and the bead areas are lubricated to assure a smooth fitment to the measurement rims. The tire is indexed into...

The tread of a tire or track refers to the rubber on its circumference that makes contact with the road or the ground. As tires are used, the tread is...

re-manufacturing process for tires that replace the tread on worn tires. Retreading is applied to casings of spent tires that have been inspected and...

Tire rotation is the practice of moving the wheels and tires of an automobile from one position to another, to ensure even tire wear. Even tire wear extends...