Reed valves are a type of check valve which restrict the flow of fluids to a single direction, opening and closing under changing pressure on each face...

A check valve, non-return valve, reflux valve, retention valve, foot valve, or one-way valve is a valve that normally allows fluid (liquid or gas) to...

blower or piston pump for scavenging. The reed valve is a simple but highly effective form of check valve commonly fitted in the intake tract of the...

steel cylinder, Piston and crankshaft. Cox reed valve engines are nearly indestructible. The needle valve and carburettor are behind the cylinder where...

windshield, under the hood, which among other features as a drain with a reed valve to allow water to drain out. This issue was the subject of a Class-action...

A poppet valve (also sometimes called mushroom valve) is a valve typically used to control the timing and quantity of petrol (gas) or vapour flow into...

by liquid-cooled, reed valve inducted 249cc 90° V-twin two stroke engines. All engines incorporated the Honda RC-Valve power valve system, and nikasil-sulfur...

of reed valve engines designed prior to 1960 used a rear reed valve induction system. In the late 1950s they played around with rear rotary valve induction...

Yamaha from 1973 to 1975. It evolved directly from the piston port (pre-reed valve intake tract), front drum-braked, five-speed Yamaha 350 cc "R5". The engine...

The intake port is connected to the crankcase through a reed valve or a rotary disk valve driven by the engine. For each cylinder, a transfer port connects...

field Reed valve, restricts the flow of fluids to a single direction Reed (weaving), a comb like tool for beating the weft when weaving Reed's law, describes...

as the RD350LC II or RD350 YPVS. It is powered by a twin-carburetted reed valve inducted, liquid-cooled, 347cc parallel-twin two-stroke engine, with a...

15 cc, Single, Two-stroke engine, Reed valve, Air-cooled engine (1975-1985) SST 175 , Single, Two-stroke engine, Reed valve, Air-cooled engine () SST 250...

a 249 cc liquid-cooled two-stroke reed-valved engine with a mechanical, rather than servo-driven, YPVS exhaust valve for a wider spread of power. Although...

parallel twin engine, Yamaha's patented Torque Induction System using reed valves, 6-speed manual transmission, autolube system, mechanical tachometer...

needing valves in the combustion chamber, but a growing number of model engines use the four-stroke cycle design instead. Both reed valve and rotary valve-type...

addition of a fresh air supply to the exhaust port. It also proved that a Reed-valve in the intake port or ducts improved the low rpm and partial load performance...

intake valve is typically a reed valve. The two most common configurations are the daisy valve, and the rectangular valve grid. A daisy valve consists...

near Milan, Italy. His first model used a 317cc single-cylinder overhead-valve engine (67x90mm bore/stroke) with a single-speed belt drive in a simple...

Regional Supercross Championships. The YZ125 has a 124 cc (7.6 cu in) reed valve-inducted two-stroke engine. It was air cooled from 1974 to 1980, and liquid...

an RS100 (itself a 1976 improvement upon the design of the original reed-valved 96cc RS100 that was introduced to the United Kingdom in September, 1974...

and Mikuni VM12SH carburetor, and later models (1993-2000) featuring a reed valve cylinder and Mikuni VM14SH carburetor. The Suzuki PV 50 has been featured...

the valve Presta valve, Schrader valve, or Dunlop valve, holds the air inside bicycle tires Pulse valve, extremely fast pulsing valve Reed valve: consists...

engine parts (exhaust, airbox etc.) 50 cc single cylinder, six-petal reed valve case induction and two-stroke injection (automix) carburetor fueled. Engine...

cooling, a modified powervalve system with larger expansion bottle and valves, a heavier crank, dual disc brakes, heavier clutch springs and more plates...

It is powered by an 84.7 cc single-cylinder, water-cooled, two-stroke, reed valve inducted engine and uses a 6-speed, constant-mesh, manual gearbox; with...

Booster. The Zuma has a 14 mm Teikei carburetor with automatic choke, reed-valve induction, a fan-assisted cooling system, an autolube oil-injection system...

between 1988 and 1993. It was powered by the naturally-aspirated, crankcase reed-valve inducted, liquid-cooled 249cc parallel-twin two-stroke engine from the...

legendary CB750 four-stroke four-cylinder cycle. In early 1969, Yamaha added reed-valve induction to its previously piston-ported designs to produce the twin-cylinder...

pulses in the exhaust system at engine idle. A sensitive reed valve assembly called the aspirator valve is placed in the air injection pumping, which draws...