Internal combustion engine cooling uses either air or liquid to remove the waste heat from an internal combustion engine. For small or special purpose...

An internal combustion engine (ICE or IC engine) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion...

Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles...

Internal combustion engines date back to between the 10th and 13th centuries, when the first rocket engines were invented in China. Following the first...

spark-ignition internal combustion engines, knocking (also knock, detonation, spark knock, pinging or pinking) occurs when combustion of some of the air/fuel...

The oil pump is an internal combustion engine part that circulates engine oil under pressure to the rotating bearings, the sliding pistons and the camshaft...

an internal combustion engine, a head gasket provides the seal between the engine block and cylinder head(s). Its purpose is to seal the combustion gases...

external combustion engine (EC engine) is a reciprocating heat engine where a working fluid, contained internally, is heated by combustion in an external...

Internal combustion engines come in a wide variety of types, but have certain family resemblances, and thus share many common types of components. Internal...

The Wankel engine (/ˈvaŋkəl̩/, VUN-kell) is a type of internal combustion engine using an eccentric rotary design to convert pressure into rotating motion...

six-stroke engine is one of several alternative internal combustion engine designs that attempt to improve on traditional two-stroke and four-stroke engines. Claimed...

hemi combustion chamber dynamics and parameters. In addition to the aircraft engine, Chrysler and Continental worked together to develop the air-cooled AV-1790-5B...

Antifreeze protein Air cooling Cryoprotectant Heater core Ice melt Internal combustion engine cooling Radiator Water cooling Waterless coolant Windshield...

Cooling system may refer to: Cooling systems for buildings, part of HVAC technology Cooling systems for vehicles, such as internal combustion engine cooling...

The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated...

intermittent combustion processes of a reciprocating internal combustion engine can be reduced. Bearings and seals can be on the cool side of the engine, where...

the airflow, to provide the primary method of cooling to the engine. Most air-cooled engines have cooling fins on the cylinders and each cylinder has a...

spring force. Poppet valves are best known for their use in internal combustion and steam engines, but are used in general pneumatic and hydraulic circuits...

F Renault engine (F for fonte, French for cast iron) is an automotive internal combustion engine, four-stroke, inline-four engine bored directly into...

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to...

naturally aspirated engine, also known as a normally aspirated engine, and abbreviated to N/A or NA, is an internal combustion engine in which air intake...

petrol engine (gasoline engine in American and Canadian English) is an internal combustion engine designed to run on petrol (gasoline). Petrol engines can...

A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft...

family of inline-4 automobile engines developed and produced by Renault since 1995. This is an internal combustion engine, four-stroke, with 4 cylinders...

classifications of thermal engines- Internal combustion (gasoline, diesel and gas turbine-Brayton cycle engines) and External combustion engines (steam piston, steam...

The Rover V8 engine is a compact OHV V8 internal combustion engine with aluminium cylinder block and cylinder heads, designed and produced by Rover in...

Rocket engines may also use several cooling methods. Examples: Regeneratively and film cooled combustion chamber and nozzle: V-2 Rocket Engine Regeneratively...

such as for cooling homemade liquid cooling systems for computers. Air cooling Internal combustion engine cooling Radiator (engine cooling) Radiator (heating)...

The Otto engine is a large stationary single-cylinder internal combustion four-stroke engine, designed by the German Nicolaus Otto. It was a low-RPM machine...

Toyota FZ engine was a 24-valve, 4.5 L (4,477 cc) DOHC straight-6 internal combustion engine manufactured by Toyota to replace the F-series engine. It was...