6061 aluminium alloy (Unified Numbering System (UNS) designation A96061) is a precipitation-hardened aluminium alloy, containing magnesium and silicon...
20 KB (1,881 words) - 20:30, 12 September 2024
7075 aluminium alloy (AA7075) is an aluminium alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits good...
14 KB (1,368 words) - 16:11, 8 June 2024
applications. 5052 aluminium alloy 5059 aluminium alloy 5083 aluminium alloy 5086 aluminium alloy 6061 aluminium alloy 6063 aluminium alloy 4043, 5183, 6005A...
90 KB (5,146 words) - 13:28, 3 October 2024
AA 6063 is an aluminium alloy, with magnesium and silicon as the alloying elements. The standard controlling its composition is maintained by The Aluminum...
7 KB (524 words) - 21:50, 21 August 2024
6082 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its...
3 KB (244 words) - 08:54, 21 September 2024
6060 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is much more closely related to the alloy 6063...
2 KB (330 words) - 22:10, 10 March 2023
the preferred filler when making lap or butt welds on the popular 6061 aluminium alloy, or when the welded parts are to be anodized. O'Brien, Robert L....
1,008 bytes (110 words) - 03:08, 8 April 2024
Extrusion Alloy Microstructure characterization of 7055-T6, 6061-T6511 and 7A52-T6 Al alloys subjected to ballistic impact against heavy tungsten alloy projectile...
2 KB (97 words) - 04:07, 8 April 2024
properties of 6061-T6 aluminium.[citation needed] AlBeMet parts can be manufactured with the same techniques normally used for aluminium, meaning that...
8 KB (821 words) - 09:49, 23 July 2024
Aluminium–magnesium–silicon alloys (AlMgSi) are aluminium alloys—alloys that are mainly made of aluminium—that contain both magnesium and silicon as the...
25 KB (2,353 words) - 17:22, 7 September 2023
8000 kg/m3, modulus of 193 GPa, and tensile strength of 570 MPa. Tempered 6061 aluminium alloy has a density of 2700 kg/m3, modulus of 69 GPa, and tensile strength...
35 KB (4,106 words) - 04:39, 2 September 2024
properties". Archived from the original on 2016-11-15. Comparison of 6061 and 7129 alloy http://www.matweb.com/search/datasheet.aspx?matguid=d62fafde9ffe4ef68614c5e2ab5869e5...
2 KB (52 words) - 04:11, 8 April 2024
limited available types of aluminum alloy tubing, the students chose to construct frames from 6061 aluminium alloy seamless drawn tube; alternatives such...
30 KB (2,089 words) - 02:20, 30 August 2024
straight-sided T-cutout in the carved headstock of the solid Reynolds 6061 aluminium alloy core that includes, headstock, neck and continues behind a thin layer...
23 KB (2,727 words) - 14:47, 10 July 2024
muddy terrain", Cannondale said. The frame was TIG welded from 6061 aluminium alloy and was fully heat treated. The same material and treatment Cannondale...
30 KB (3,493 words) - 10:27, 5 March 2024
Y alloy is a nickel-containing aluminium alloy. It was developed by the British National Physical Laboratory during World War I, in an attempt to find...
6 KB (648 words) - 12:04, 5 July 2024
Titanium (redirect from Applications of titanium and titanium alloys)
steel alloys, but are less dense. Titanium is 60% denser than aluminium, but more than twice as strong as the most commonly used 6061-T6 aluminium alloy. Certain...
79 KB (8,788 words) - 17:37, 15 September 2024
lines on one side for slip resistance. The most common alloy used for aluminium tread plate is 6061, although 5086-H34 and 3003-H231 are also used. Diamond...
2 KB (202 words) - 04:06, 28 June 2024
Sustained load cracking (section Alloy composition)
be contributory. Alloy composition has also been found to be a factor. Alloy 6061 has shown good resistance to SLC, as have alloys 5283 and 7060. Manufacturing...
7 KB (599 words) - 15:43, 10 January 2024
Metal matrix composite (redirect from Pseudo-alloy)
example, a Al-Al2O3 composite can increase the yield strength of cast Al 6061 alloys from 105 to 120 MPa and increase the young’s modulus from 70 to 95 GPa...
21 KB (2,482 words) - 10:29, 3 June 2024
; Soto, H. F. (2001). "Tool wear in the friction stir welding of aluminium alloy 6061+20% Al2O3: A preliminary study". Scripta Materialia. 45: 75–80. doi:10...
57 KB (6,857 words) - 18:29, 26 September 2024
wings and fuselage. The most commonly used materials are aluminum and aluminium alloys with other metals, including zinc, magnesium and copper. As the twentieth...
10 KB (1,393 words) - 23:58, 26 September 2024
good resistance against local necking phenomenon. A few aluminium alloy composites such as 6061 series and 2024 series have shown high strain rate superplasticity...
35 KB (5,237 words) - 12:41, 12 February 2024
(help) P. Hofer; E. Kaschnitz (2011). "Thermal diffusivity of the aluminium alloy Al-10Si-Mn-Mg (Silafont 36) in the solid and liquid states". High Temperatures...
12 KB (1,022 words) - 09:36, 5 July 2024
Precipitation hardening (section Alloy design)
2000-series aluminium alloys (important examples: 2024 and 2019, also Y alloy and Hiduminium) 6000-series aluminium alloys (important example: 6061 for bicycle...
36 KB (5,467 words) - 18:59, 24 March 2024
The Aluminum Association (redirect from The Aluminium Association)
nomenclature of aluminum alloys in the United States. These alloys are identified by the abbreviation "AA", for example AA 6061-T6. In 1933, Congress passed...
13 KB (1,527 words) - 18:49, 5 March 2024
Sheet metal (section Aluminium)
chassis, tanks, and pressure vessels. Grade 6061-T6 is a common heat-treated structural aluminium alloy. It is weldable, corrosion resistant, and stronger...
45 KB (3,714 words) - 23:25, 27 July 2024
fiber-epoxy). These materials and others such as titanium, aluminium, magnesium and high strength steel alloys are widely used in aerospace and other applications...
26 KB (1,869 words) - 12:22, 11 August 2024
Reynolds Technology (section Aluminium)
sold. 7005 - Al-Zn alloy. UTS: 400 MPa, density 2.78 g/cm3 6061 - Al-Si-Mg alloy. UTS: 325 MPa, density 2.70 g/cm3 X-100 - Al-Li Alloy. UTS: 550-600 MPa...
15 KB (1,444 words) - 07:10, 30 June 2023
to shape complex sheet geometries in non-superplastics alloys such as 2014, 2024, 2219 and 6061. making the process ideal for producing structural components...
5 KB (565 words) - 09:06, 20 November 2021