Canadarm or Canadarm1 (officially Shuttle Remote Manipulator System or SRMS, also SSRMS) is a series of robotic arms that were used on the Space Shuttle...

arm is a larger, more advanced version of the Space Shuttle's original Canadarm. Canadarm2 is 17.6 m (58 ft) when fully extended and has seven motorized...

orbiters were originally constructed. After its decommissioning, Endeavour's Canadarm (formally the 'Shuttle Remote Manipulator System') was removed in order...

human hand, i.e. with independent fingers and thumbs. .. In space, the Canadarm and its successor Canadarm2 are examples of multi degree of freedom robotic...

operate in the payload bay or be deployed by the Remote Manipulator System (Canadarm) as a free-flying satellite. It carried 10 experiments to study formation...

manipulator arms, one large and one small, broadly similar to the Space Shuttle Canadarm and International Space Station Canadarm2, and associated dextrous manipulator...

other experiments including the Shuttle robotic arm, commonly known as Canadarm. Other experiments or tests included Shuttle Multispectral Infrared Radiometer...

free-flying stainless steel disk. The WSF was deployed using the Space Shuttle's Canadarm. The WSF then used nitrogen gas thrusters to position itself about 55 km...

Weasel all-terrain vehicle, the STEM antenna for the space program, and the Canadarm. Klein worked for forty years as a mechanical engineer at the National...

bought the space robotics division of Spar Aerospace—manufacturer of the Canadarm—in March 1999, renaming it MD Robotics. The company completed the Mobile...

Canadian technological contributions to space exploration include the Canadarm on the Space Shuttle and Canadarm2 on the International Space Station....

International Space Station and is known for its robotic tools, such as multiple Canadarms. Canada has initiated many long-term projects, including the Radarsat...

Columbia Challenger Discovery Atlantis Endeavour Add-ons Spacelab (ESA) Canadarm (CSA) Extended Duration Orbiter Remote Controlled Orbiter Spacehab Multi-Purpose...

The "Canada" wordmark on the Canadarm...

Davis moved the wrist joint on the Remote Manipulator System (RMS) arm (Canadarm) to try to point WSF's Horizon Sensor into the Sun in an attempt to warm...

Endeavour.: III-366–368  The Remote Manipulator System (RMS), also known as Canadarm, was a mechanical arm attached to the cargo bay. It could be used to grasp...

defines Canada, followed by ice hockey, the national flag, the beaver, the Canadarm, Canada Day, and Canadian Forces peacekeeping. Canada's most well known...

used in cooperation with NASA's Space Shuttle program, most notably the Canadarm, a remote manipulator system. The company went through a series of changes...

develop the Shuttle Remote Manipulator System (RMS), also known as the "Canadarm" or robot arm. She was the first woman to serve as a CapCom. By early 1982...

Spacesystems". December 5, 2007. Retrieved May 14, 2013. "MDA Selling Canadarm Business to U.S. Firm". CBC News. January 8, 2008. Retrieved February 21...

assembly. The system uses regular 2D cameras in the Space Shuttle bay, on the Canadarm, or on the ISS along with cooperative targets to calculate the 3D position...

inspection of the Shuttle's impacted starboard side using the Shuttle's Canadarm robot arm, but the limited resolution and range of the cameras made it...

Astronaut Office representative for the development and testing of the Canadarm remote manipulator system and the testing of payload bay door contingency...

new projects into orbit. One of the most important Canadian projects is Canadarm, which has become used frequently on the International Space Station (or...

"Space agency closing research lab key to International Space Station, Canadarm". CBC News. 2024-03-04. Canadian Space Agency website - David Florida Laboratory...

for crewed Artemis missions. MDA  Canada Brampton, Ontario Lunar Gateway Canadarm 3 Ispace  Japan Tokyo Lunar in situ resource utilization Hakuto-R lunar...

"work station" foot restraint at the end of the Remote Manipulator System (Canadarm). On the seventh day of the mission, both astronauts performed another...

MacDonald Dettwiler (MDA), the Canadian aerospace company that built the Canadarm and RADARSAT, were responsible for the engineering design and building...

mechanism Gemini IDSS IBDM NDS Soyuz Kontakt SSVP USIS Navigation systems Canadarm Canadarm2 Igla Kurs Lyappa TORU Category:Spacecraft docking systems...

detailed inspection of the payload and checked out both the robot arm (Canadarm) and the spacesuits. All of Endeavour's systems functioned well as the...