Molded plywood is the term for two- or three-dimensionally shaped products from multiple veneer layers that are glued together through heat and pressure...

Eames Lounge Chair was designed by Charles and Ray Eames and is made of molded plywood and leather. It was the first chair the Eameses designed for the high-end...

& Eero Saarinen. Molded Plywood Pilot's Seat (1943) Prototype Plywood and Metal Chairs (various models) (1943-1946) Molded Plywood Elephant (1945) Lounge...

experiments with molded plywood designs in the spare room of their apartment. In 1942 Charles left MGM to begin making molded plywood splints for the United...

Lockheed Vega) was built using molded plywood, where the layers of plywood are formed over a "plug" or within a mold. A later form of this structure...

contour the plywood to the shape of a leg. The Navy commissioned the Eameses to mass produce 150,000 splints. Their company became the Molded Plywood Products...

but it features thin upholstery instead of the 406's webbed seat. Its molded plywood frame swings slightly when a person sits in it, giving the impression...

with plywood, which would be molded during manufacturing. Higher-quality pieces would feature the Waterfall curve in molded plywood where the plywood softened...

Intended to be "the poor man's airplane", it featured an innovative molded plywood monocoque fuselage for which the Lougheads, Northrop and Tony Stadlman...

made from fiberglass sandwich construction with a plastic deck. Cold-molded plywood is still used and some sailers prefer that material. The boat has a...

Munich) A more recent chair, red painted ash colour Ant (chair) Bentwood Molded plywood Swan (chair) "Chairs - 1950s". Photography. Design Museum. Retrieved...

chairs such as the Bofinger chair in 1966. Technological advances led to molded plywood and wood laminate chairs, as well as chairs made of leather or polymers...

sustaining growth. Common cellulose-based building materials, such as plywood, drywall, furring strips, finish carpentry, cabinetry, wood framing, composite...

recreational sailboat, with the earlier production models made from molded plywood and the more recent models built predominantly of fiberglass, with wood...

Crew 2 Draft 7 in (180 mm) up Hull Type Monohull Construction Cold molded plywood GRP with wood trim Hull weight 420 lb (190 kg) (including rig) LOA 11 ft...

During World War II, fiberglass was developed as a replacement for the molded plywood used in aircraft radomes (fiberglass being transparent to microwaves)...

Intended to be "the poor man's airplane", it featured an innovative molded plywood monocoque fuselage for which the Lougheads, Northrop and Tony Stadlman...

Whitney R-2800-49 engines and constructed mostly of Duramold, a type of molded plywood. The United States Army Air Forces (USAAF, successor to the USAAC) struggled...

was building fiberglass hulls in-house and had phased out its line of molded plywood models. In 1962, production expanded to a 29,000-square-foot former...

fuselage covered with stressed molded plywood. Its wing had a foliated spruce plywood spar and was covered with plywood although the ailerons were fabric...

Bayonets — M1942, M4, M5, M6, or M7, or M9 Entrenching tool Packboard — A molded plywood frame with canvas back pad, shoulder straps and lashing cord. M1951...

designed by architect Frank Gehry Eames Lounge Chair, a trademark for molded plywood chairs, contoured to fit the shape of a person Egg chair, designed by...

in 1945 and known as the Rhodes 19, in the 1950s O'Day switched from molded plywood to fiberglass, added a cabin and—voila!—the fiberglass Mariner was conceived...

furniture designs were mass-produced after World War II (1939–45). His molded plywood Diamond chair is considered a classic. René-Jean Caillette was born...

which became the first cantilever chair made of molded plywood. This stackable chair was made of plywood which the edge of the seat was slightly tilted...

in light molded plywood panels while the rear fuselage sides were covered in fabric. Behind the pilot was a headrest, molded into the plywood top decking...

Chair for Johannes Hansen. Wegner began to experiment with molded plywood in 1948. Plywood had become popularized as a furniture material by the Eames...

materials, such as steel in its many forms; glass, used by Walter Gropius; molded plywood, such as that used by Charles and Ray Eames; and of course plastics...

subcontracts from every major American aircraft manufacturer. These included molded plywood fuselages for trainers such as the AT-6 and Vultee BT-13, and doors...

ten-seat semi-monocoque wooden glider. The fuselage was covered with 2-ply molded plywood with the rudder and elevators fabric covered. The single-spar cantilever...