Carbon steel is a steel with carbon content from about 0.05 up to 2.1 percent by weight. The definition of carbon steel from the American Iron and Steel...

Steel is an alloy of iron and carbon with improved strength and fracture resistance compared to other forms of iron. Because of its high tensile strength...

hard steel, but also a composite steel that was inhomogeneous, consisting of a very high-carbon steel (formerly the pig-iron) and a lower-carbon steel (formerly...

other elements such as molybdenum, carbon, nickel and nitrogen depending on its specific use and cost. Stainless steel's resistance to corrosion results...

low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel. HSLA steels vary...

Wootz steel is a crucible steel characterized by a pattern of bands and high carbon content. These bands are formed by sheets of microscopic carbides...

same extent, that carbon steel does, and carbon-steel heat-treating behavior can vary radically depending on alloying elements. Steel can be softened to...

indicate the amount of carbon, in hundredths of a percent (basis points) by weight. For example, a 1060 steel is a plain-carbon steel containing 0.60 wt%...

used in bowl gouges and skew for woodturning.[1] It is superior to high-carbon steel tools in that it can withstand higher temperatures without losing its...

A fire striker is a piece of carbon steel from which sparks are struck by the sharp edge of flint, chert or similar rock. It is a specific tool used in...

stainless steel is the most common stainless steel. It is an alloy of iron, carbon, chromium and nickel. It is an austenitic stainless steel, and is therefore...

Damascus steel (Arabic: فولاذ دمشقي) refers to the high carbon crucible steel of the blades of historical swords forged using the wootz process in the...

blades, springs and many more. These steels are generally low-alloy manganese, medium-carbon steel or high-carbon steel with a very high yield strength. This...

Tool steel is any of various carbon steels and alloy steels that are particularly well-suited to be made into tools and tooling, including cutting tools...

(excepting slight impurities); these are called carbon steels. However, alloy steel encompasses steels with additional (metal) alloying elements. Common...

and engine cylinder blocks. Steel castings are categorized into two general groups: carbon steels and alloy steels. Steel is more difficult to cast than...

equivalent of wrought iron is mild steel, also called low-carbon steel. Neither wrought iron nor mild steel contain enough carbon to be hardened by heating and...

the strongest of the construction options. Carbon steel can be hot or cold rolled. Hot rolled carbon steel is used for stamping and moderate forming applications...

or sword. The most common blade materials are carbon steel, stainless steel, tool steel, and alloy steel. Less common materials in blades include cobalt...

which carbon dissolved in the steel is the deoxidizer. Aluminium, silicon, and manganese are the most widely used elements for the deoxidation of steel. Usually...

The term hardened steel is often used for a medium or high carbon steel that has been given heat treatment and then quenching followed by tempering. The...

Rolled carbon steel for cold-finished steel bars JIS G 3114 - Hot-rolled atmospheric corrosion resisting steels for welded structure JIS G 3115 – Steel plates...

heat-treatment process. These steels are a special class of very-low-carbon ultra-high-strength steels that derive their strength not from carbon, but from precipitation...

inconsistent. Laminated steel offered both a way to average out the properties of the steel, as well as a way to restrict high carbon steel to the areas that...

of steels at red-hot temperatures. It is often caused by high sulfur levels, in which case it is also known as sulfur embrittlement. Iron or steel, when...

are manufactured of stainless steel, and composite bars made of glass fiber, carbon fiber, or basalt fiber. The carbon steel reinforcing bars may also be...

are carbon steel and cast iron. Although the latter was the most common type used in the past, cooks tend to be divided on whether carbon steel or cast...

S275JOH Steel Pipes manufacture Process The steel manufacturing process shall be at the discretion of the steel producer. S275JOH carbon steel pipes can...

property classes produced from carbon steels and ISO 3506-1 for property classes produced from corrosion resistant steels. There are many standards governing...

Low alloy steel, steel alloyed with other elements Carbon steel, also called plain carbon steel, a combination of iron and carbon Damascus steel, a variety...