GPS signals are broadcast by Global Positioning System satellites to enable satellite navigation. Receivers on or near the Earth's surface can determine...

the weak GPS signal. GPS's vulnerability to jamming is a threat that continues to grow as jamming equipment and experience grows. GPS signals have been reported...

inside the spot beam, the GPS satellite will appear as two GPS signals occupying the same position. While the full-Earth M-code signal is available on the Block...

position. Since GPS signals at terrestrial receivers tend to be relatively weak, natural radio signals or scattering of the GPS signals can desensitize...

When GPS was first being put into service, the US military was concerned about the possibility of enemy forces using the globally available GPS signals to...

navigation signals to improve the system's accuracy — including new CDMA signals in the L3 and L5 bands, which will use modulation similar to modernized GPS, Galileo...

impression of a GPS Block III satellite in orbit GPS Block III is the first series of third-generation GPS satellites, incorporating new signals and broadcasting...

implemented in sensors. Use more GNSS signal types. Modernized civil GPS signals are more robust than the L1 signal and should be leveraged for increased...

agree with the signals broadcast by GPS or other GNSS satellites. GPSDOs work well as a source of timing because the satellite time signals must be accurate...

Outdoors, GPS signals are typically around the −155 dBW level (−125 dBm). Conventional GPS receivers integrate the received GPS signals for the same...

has the security hardware necessary to decode the encrypted P(Y)-code GPS signals. Manufactured by Rockwell Collins, the DAGR entered production in March...

satellite signals. Dedicated GPS timing receivers are accurate to better than 1 microsecond; however, general-purpose or consumer grade GPS may have an...

Structure of the time-encoding components of GPS signals, NAV and CNAV versions "Advisory for the August 1999 GPS Week Rollover". www.navcen.uscg.gov. Retrieved...

block the Galileo signals without also interfering with its own GPS signals. The US did not want to lose their GNSS capability with GPS while denying enemies...

contain an L1 & L5 GPS payload. This means they will potentially be usable with the L5 modernized GPS signals when the new signals and receivers become...

individual signals collected and integrated by the receiver units employed in a Global Navigation Satellite System (GNSS). The integrity of received signals and...

paper notes that the Russian R-330Zh Zhitel impacted GPS signals that JDAMs rely on. Some GPS signals are weak with some having "travelled up to 10,900 nautical...

using GPS tracking software and devices with GPS capability. A GPS "track me" essentially contains a GPS module that receives the GPS signal and calculates...

encrypted military M-code GPS signaling to ensure that the JDAM only accepts signals with correct encryption and rejects all other signals. However, according...

EGPS, EGPS, trademarked as eGPS) is a technology designed for mobile phones on GSM and W-CDMA networks, to augment GPS signals to deliver faster location...

exceptionally poor signal conditions, for example in urban areas, satellite signals may exhibit multipath propagation where signals skip off structures...

GPS puck has two meanings. It is a term for the antenna on GPS navigation devices, which receives GPS signals from GPS satellites. The early antennas were...

the Earth of navigation signals from Global Navigation Satellite Systems such as GPS. The idea of using reflected GNSS signals for earth observation was...

GPS/INS is the use of GPS satellite signals to correct or calibrate a solution from an inertial navigation system (INS). The method is applicable for...

developments allow for the production of IMU-enabled GPS devices. An IMU allows a GPS receiver to work when GPS-signals are unavailable, such as in tunnels, inside...

GPS Block IIIF, or GPS III Follow On (GPS IIIF), is the second set of GPS Block III satellites, consisting of up to 22 space vehicles. The United States...

Simultaneous GPS (S-GPS) is a method to allow a GPS reception and CDMA communications to operate simultaneously in a mobile phone. Ordinarily, cellular...

controllers integrated with low-noise radio receivers to decode GPS signals at very low signal levels (typically -160dBm). SiRF chips also support SBAS to...

Data Link. A receiver on an aircraft uses this information to correct GPS signals, which then provides a standard instrument landing system (ILS)-style...

(RAIM), which uses redundant GPS signals to ensure the integrity of the position solution, and to detect faulty signals. Additional sensors may include:...