An exhaust system is used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove. The entire system conveys burnt...

In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. The word manifold comes from the Old...

typically screwed into a threaded hole in the exhaust system, located after the branch manifold of the exhaust system combines and before the catalytic converter...

Look up exhaust, exhaustive, or exhaustion in Wiktionary, the free dictionary. Exhaust, exhaustive, or exhaustion may refer to: Exhaustion of intellectual...

Catalytic converter Exhaust clamp and bracket Exhaust flange gasket Exhaust gasket Exhaust manifold Exhaust manifold gasket Exhaust pipe Heat shield Heat...

Diesel exhaust is the exhaust gas produced by a diesel engine, plus any contained particulates. Its composition may vary with the fuel type or rate of...

engines have to effectively manage the exhaust of the cooled combustion gas from the engine. The exhaust system frequently contains devices to control...

valve that feeds charge air directly to the exhaust manifold. The throttle bypass/throttle solenoid system is combined with ignition retardation and slight...

engine. An exhaust brake is a device that essentially creates a major restriction in the exhaust system, and creates substantial exhaust back pressure...

In internal combustion engines, exhaust gas recirculation (EGR) is a nitrogen oxide (NOx) emissions reduction technique used in petrol/gasoline, diesel...

designed to remove diesel particulate matter[broken anchor] or soot from the exhaust gas of a diesel engine. Wall-flow diesel particulate filters usually remove...

The steam locomotive exhaust system consists of those parts of a steam locomotive which together discharge exhaust steam from the cylinders in order to...

noise emitted by the exhaust of an internal combustion engine—especially a noise-deadening device forming part of the exhaust system of an automobile. Mufflers...

ships in 8 cell modules (2 rows of 4) that share a common uptake hatch (exhaust system) sited between the two rows. The Mk 41 VLS adopts modular design concept...

engine, the geometry of the exhaust system can be optimised ("tuned") to maximise the power output of the engine. Tuned exhausts are designed so that reflected...

bank, reducing the amount of exhaust piping needed. In this case, each turbocharger is fed exhaust gases by a separate exhaust manifold. For four-cylinder...

Diesel exhaust fluid (DEF; also known as AUS 32 and sometimes marketed as AdBlue) is a liquid used to reduce the amount of air pollution created by a...

operation. The gas generator system consisted of the gas generator, gas generator control valve, turbine exhaust system and exhaust manifold, heat exchanger...

It is one of the leading system developers and suppliers of exhaust technology, vehicle heaters and air-conditioning systems worldwide and is also involved...

engine but is 18 kg (40 lb) lighter due to a lighter, more unrestricted exhaust system, the extensive use of carbon fibre, and a stiffer suspension in order...

An exhaust heat recovery system turns waste heat energy in exhaust gases into electric energy for batteries or mechanical energy reintroduced on the crankshaft...

A catalytic converter is an exhaust emission control device which converts toxic gases and pollutants in exhaust gas from an internal combustion engine...

removes the oil, then the gases are fed into the exhaust system via a venturi tube.[citation needed]. This system maintains a small amount of vacuum in the crankcase...

head's exhaust ports or in the exhaust manifold. These systems provided oxygen to oxidize (burn) unburned and partially burned fuel in the exhaust before...

produced by a running internal combustion engine that occurs in the exhaust system, rather than inside the combustion chamber. It is also sometimes referred...

manufacturer of exhaust systems that began in 1990 in the motorcycle market, and expanded into automobile exhausts in 2010. A global exhaust supplier in motorcycle...

control exhaust system secondary air injection pump for direct injection into exhaust ports to assist cold start operation, cast iron exhaust manifold...

100 psi). The assembly for the turbochargers is lower than that of the exhaust system and the engine sits 50 mm (2.0 in) lower in the chassis than the other...

this system was used to inject air into the engine's exhaust ports to provide oxygen so unburned and partially burned hydrocarbons in the exhaust would...

engines, Chrysler and Eberspaecher North America designed a special exhaust system for MDS-equipped vehicles. This includes four separate mufflers, two...