A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece...

spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. Circular saws may also be loosely used...

the abrasive saw is not a saw in technical terms. Hole saw: ring-shaped saw to attach to a power drill, used for cutting a circular hole in material....

A black hole is a region of spacetime wherein gravity is so strong that no matter or electromagnetic energy (e.g. light) can escape it. Albert Einstein's...

cutter, broach cutter, trepanning drill, hole saw, or cup-type cutter) is a form of core drill used to create holes in metal. An annular cutter, named after...

film is the tenth installment in the Saw film series, serving as a direct interquel set between Saw (2004) and Saw II (2005). It stars Tobin Bell and Shawnee...

to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different...

character and the primary antagonist of the Saw franchise. Jigsaw made his debut in the first film of the series, Saw, and appears in all subsequent installments...

fabrication of circular tube is thus most commonly done with a rotary hole saw in which a hole saw of the diameter of the tube being attached to is fed into the...

saw power head has two oil holes, one on each side. These holes must match with the outlet of the oil pump. The pump sends the oil through the hole in...

may have non-standard-sized alignment guide-holes, making sharpening attempts difficult. If the alignment hole is too small, the pencil cannot be inserted...

Saw II is a 2005 horror film directed by Darren Lynn Bousman and written by Leigh Whannell and Bousman. It is the sequel to 2004's Saw and the second installment...

A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically...

edge. Design variations, such as serrated edges found on bread knives and saws, serve to enhance this force concentration, adapting blades for specific...

drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core...

mechanics, saw a gap in traditional drilling methods and revolutionized the process. A pilot hole may be drilled the full extent of the final hole, or may...

inserted. Hot tapping is also the first procedure in line stopping, where a hole saw is used to make an opening in the pipe, so a line plugging head can be...

films: Saw (2004), Saw II (2005), Saw III (2006), Saw IV (2007), Saw V (2008), Saw VI (2009), Saw 3D (2010), Jigsaw (2017), Spiral (2021), and Saw X (2023)...

very little time; it is also possible to defeat them by drilling with a hole-saw drill bit. Standard tubular-lock drill bit diameters are 0.375 in (9.5 mm)...

Saw V is a 2008 horror film directed by David Hackl, in his directorial debut, from a screenplay by Patrick Melton and Marcus Dunstan. It is the fifth...

finished product. A hole saw usually attaches to a mandrel, the latter being basically a drill bit with threads to secure the saw. Mandrels are not recent...

bi-metal hole saws, and later in 1974, Morse began manufacturing hole saw arbors. In 1978, Morse patented the industry's first one-piece hole saw called...

In golf, a hole in one or hole-in-one (also known as an ace, mostly in American English) occurs when a ball hit from a tee to start a hole finishes in...

Hole was an American alternative rock band formed in Los Angeles, California, in 1989. It was founded by singer and guitarist Courtney Love and guitarist...

John and the Hole is a 2021 American coming-of-age psychological thriller film directed by Pascual Sisto and written by Nicolás Giacobone. A feature-length...

title was, "Chapter One – Down the Rabbit Hole". Alice follows a white rabbit with pink eyes because she saw the rabbit checking a pocket watch. She chases...

through soft materials such as drywall without drilling a hole for the blade. Compass saws typically feature a larger, coarser blade, and are designed...

underground mine in Kimberley, South Africa, and claimed to be the deepest hole excavated by hand, although this claim is disputed by Jagersfontein. The...

A memory hole is any mechanism for the deliberate alteration or disappearance of inconvenient or embarrassing documents, photographs, transcripts or other...

The Texas Chain Saw Massacre is a 1974 American independent horror film produced, co-composed, and directed by Tobe Hooper, who co-wrote it with Kim Henkel...