A printed circuit board (PCB), also called printed wiring board (PWB), is a medium used to connect or "wire" components to one another in a circuit. It...

Printed circuit board milling (also: isolation milling) is the milling process used for removing areas of copper from a sheet of printed circuit board...

Eurocard is an IEEE standard format for printed circuit board (PCB) cards that can be plugged together into a standard chassis which, in turn, can be...

used for rigid printed circuit boards, allowing the board to conform to a desired shape, or to flex during its use. Flexible printed circuits (FPC) are made...

integrate all their functions onto a single printed circuit board. Unlike a desktop personal computer, single-board computers often do not rely on expansion...

419, was filed in 1967 and refers to a particular printed circuit board layout as a Printed Circuit Breadboard. Both examples refer to and describe other...

mainboard, main circuit board, MB, base board, system board, or, in Apple computers, logic board) is the main printed circuit board (PCB) in general-purpose...

format for printed circuit board (PCB) designs. It is the de facto standard used by PCB industry software to describe the printed circuit board images: copper...

substrate (a printed circuit board or PCB) and solder the components to these interconnections to create a finished circuit. In an integrated circuit or IC,...

traces that run out of the die, through the package, and into the printed circuit board (PCB) have very different electrical properties compared to on-chip...

Double-Sided Flexible Printed Circuits IPC-4562 Metal Foil for Printed Wiring Applications IPC-4101 Laminate Prepreg Materials Standard for Printed Boards IPC-4202...

substrate or printed circuit board (PCB). A PCB having components on a Printed wiring board (PWB) is not considered a true hybrid circuit according to...

unit as a whole. This type of switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize...

integration onto a printed circuit board, most dies are packaged in various forms. Most dies are composed of silicon and used for integrated circuits. The process...

This results in the final layout artwork for the integrated circuit or printed circuit board. A generalized design flow may be as follows: Schematic → schematic...

particular MegaSquirt without knowing three things: microcontroller, printed circuit board and firmware versions. As for the commercial/refined MS3Pro and...

contexts: Printed circuit boards, during which components are graphically placed on the board and the wires drawn between them Integrated circuits, during...

A PCI Mezzanine Card or PMC is a printed circuit board assembly manufactured to the IEEE P1386.1 standard. This standard combines the electrical characteristics...

distinction between a large MCM and a small printed circuit board is sometimes fuzzy. Packaged integrated circuits are usually large enough to include identifying...

location of a component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters...

which leads on the components are inserted through holes drilled in printed circuit boards (PCB) and soldered to pads on the opposite side, either by manual...

In electronics, a signal trace or circuit trace on a printed circuit board (PCB) or integrated circuit (IC) is the equivalent of a wire for conducting...

electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical component mounted in this manner is referred...

layer of polymer that is usually applied to the copper traces of a printed circuit board (PCB) for protection against oxidation and to prevent solder bridges...

TTM Technologies, Inc. is an American printed circuit board (PCB) manufacturer headquartered in Santa Ana, California. Founded in 1998, the company is...

chipboard Oriented strand board Printed circuit board, in computing and electronics Motherboard, the main printed circuit board of a computer A reusable...

are attached (wired, bonded directly) to a printed circuit board, and covered by a blob of epoxy. Chip on board eliminates the packaging of individual semiconductor...

In microstrip antennas and printed monopole antennas an area of copper foil on the opposite side of a printed circuit board serves as a ground plane. The...

A single-board microcontroller is a microcontroller built onto a single printed circuit board. This board provides all of the circuitry necessary for a...

The most common unit of measure for the copper thickness on a printed circuit board (PCB) is ounces (oz), as in mass. It is the resulting thickness...