The Time Protocol is a network protocol in the Internet Protocol Suite. Its purpose is to provide a site-independent, machine readable date and time. The...

The Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data...

The Real-time Transport Protocol (RTP) is a network protocol for delivering audio and video over IP networks. RTP is used in communication and entertainment...

The Precision Time Protocol (PTP) is a protocol for clock synchronization throughout a computer network with relatively high precision and therefore potentially...

RTP Control Protocol (RTCP) is a binary-encoded out-of-band signaling protocol that functions alongside the Real-time Transport Protocol (RTP). Its basic...

Real-Time Messaging Protocol (RTMP) is a communication protocol for streaming audio, video, and data over the Internet. Originally developed as a proprietary...

The Internet Control Message Protocol (ICMP) is a supporting protocol in the Internet protocol suite. It is used by network devices, including routers...

The Real-Time Streaming Protocol (RTSP) is an application-level network protocol designed for multiplexing and packetizing multimedia transport streams...

13:45:51-PST List of well-known ports Echo Protocol QOTD Time Protocol Network Time Protocol RFC 867 List of NIST time servers supporting this protocol...

The Time-Stamp Protocol, or TSP is a cryptographic protocol for certifying timestamps using X.509 certificates and public key infrastructure. The timestamp...

computer networking, the User Datagram Protocol (UDP) is one of the core communication protocols of the Internet protocol suite used to send messages (transported...

The Discard Protocol is a service in the Internet Protocol Suite defined in 1983 in RFC 863 by Jon Postel. It was designed for testing, debugging, measurement...

The Echo Protocol is a service in the Internet Protocol Suite defined in 1983 in RFC 862 by Jon Postel. It was originally proposed as a way to test and...

different type of positive leap second handling associated with the Network Time Protocol (NTP). This yields a system that does not conform to the POSIX standard...

standards. The Network Time Protocol (NTP), designed to synchronise the clocks of computers over the Internet, transmits time information from the UTC...

The Character Generator Protocol (CHARGEN) is a service of the Internet Protocol Suite defined in RFC 864 in 1983 by Jon Postel. It is intended for testing...

the NTP protocol, Simple Network Time Protocol (SNTP), can also be used as a pure single-shot stateless primary/secondary synchronization protocol, but lacks...

The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks for automatically assigning IP...

Initiation Protocol SLP, Service Location Protocol SMB, Server Message Block SMTP, Simple Mail Transfer Protocol SNTP, Simple Network Time Protocol SSH, Secure...

CANopen is a communication protocol stack and device profile specification for embedded systems used in automation. In terms of the OSI model, CANopen...

The Session Initiation Protocol (SIP) is a signaling protocol used for initiating, maintaining, and terminating communication sessions that include voice...

The Time-Triggered Protocol (TTP) is an open computer network protocol for control systems. It was designed as a time-triggered fieldbus for vehicles...

The AT Protocol (Authenticated Transfer Protocol, commonly shortened to ATproto or atproto) is a protocol and open standard for decentralized social networking...

Network Time Protocol can be used to synchronize timekeeping systems across the globe. In medieval philosophical writings, the atom was a unit of time referred...

Kerberos (/ˈkɜːrbərɒs/) is a computer-network authentication protocol that works on the basis of tickets to allow nodes communicating over a non-secure...

through the public Internet, such as for applications of the Network Time Protocol using 224.0.1.1. AD-HOC block Addresses in three separate blocks are...

followed the initial core document. The Real-time Publish-Subscribe Wire Protocol DDS Interoperability Wire Protocol Specification ensured that information...

can be varied: I/O blocks, drives, sensors, or actuators. The Profinet protocol is designed for the fast data exchange between Ethernet-based field devices...

Working with Date Time Values". garmin.com. 2023-01-01. Retrieved 2023-02-25. "Flexible and Interoperable Data Transfer - FIT Protocol". garmin.com. 2019-03-01...

account for data path delays, the gPTP protocol measures the frame residence time within each bridge (the time required for receiving, processing, queuing...