The Ford flathead V8 (often called simply the Ford flathead or flathead Ford) is a V8 engine with a flat cylinder head introduced by the Ford Motor Company...

causes the engine block to resemble a Y. It was introduced in 1954 as a more modern replacement for the outdated side-valved Ford Flathead V8 and was used...

Multicylinder flathead engines were used for cars such as the Ford Model T and Ford Model A, the Ford flathead V8 engine and the Ford Sidevalve engine. Cadillac...

overall engine size. 1932–1953 Flathead V8 1940–1950 Ford GAA engine, exclusively for armored fighting vehicle military use 1952–1963 Lincoln Y-block V8 engine—big-block...

The Ford Modular engine is Ford Motor Company's overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family. Introduced in 1990, the...

known as the Ford V‑8. It had the new flathead V8 engine. The Model 18 was the first low-priced, mass-marketed car to have a V8 engine -- an important...

The Lincoln Y-block V8 engine was Ford's earliest OHV V8 engine, introduced by Lincoln in the 1952 model year. Like the later and better-known but even...

increased following the 1932 introduction of the Ford Flathead V8. By the early 21st century, the use of V8 engines in passenger vehicles declined as automobile...

prototype X engines include a 1920s Ford X-8 automotive engine, which was investigated during the development process of the Ford Flathead V8 engine. During...

(910 kg). The engine is Ford's 3.062-by-3.75-inch (77.8 by 95.3 mm), 221 in3 (3,620 cm3; 3.62 L) 90° flathead V8 Otto (spark ignition) engine. It is liquid-cooled...

136 cu in (2.23 L) V8 in addition to the popular 221 cu in (3.62 L) flathead V8. The model was a refresh of its predecessor, the Model 48 (itself based...

The Chrysler Hemi engine, known by the trademark Hemi or HEMI, refers to a series of high-performance American overhead valve V8 engines built by Chrysler...

London, UK. The Godsal Sports Tourer incorporated a contemporary Ford Flathead V8 engine with single dual-throat carburetor achieving approximately 85bhp...

H-series engines were used in the full-sized Ford cars and trucks to replace the smaller 136 cu in (2.2 L) Flathead V8 that was used in the 1937 Ford. Ford discontinued...

long-lived flathead V8 engine was replaced for 1954 by a 239 cubic inch overhead valve Y-block unit, marking the end of an era. This engine produced 130 hp...

standard engine and the optional 100 hp Flathead V8. In a one-year-only combination, the Flathead V8 was offered with the newly optional Ford-O-Matic transmission...

straight-six engines are almost always narrower than a V6 engine or V8 engine, but longer than straight-four engines, V6s, and most V8s. Straight-six engines are...

Toyota had initially considered copying the Ford flathead V8 engine because it was the most popular engine in Japan at the time. However, the machining...

with engines shared with Ford sedans. The standard engine was a 226 cubic-inch 95 hp H-series inline-6, with a 239 cubic-inch 100 hp Flathead V8. For...

Chrysler flathead engine is a flathead automotive engine manufactured by the Chrysler Corporation from 1924 through the early 1960s. The flathead engine came...

255 V8 330 FT V8 332 V8 352 V8 360 V8 361 FT V8 390 V8 391 FT V8 406 V8 410 Mercury V8 427 V8 428 V8 335-Series (M-Block) 351 M-block V8 (Not to be confused...

Desaxe offset into the Ford Flathead V8 engine throughout the 1930s while adopting greater offsets into the 1940s. Use of desaxe engines is now becoming more...

vertical A-pillars. For 1954, Ford ended production of the long-running Flathead V8, replacing it with a 239-cubic-inch Y-block V8; the 215-cubic-inch inline-six...

V-8 4-stroke aircraft engine developed from the Ford flathead V8 engine in the United States in the late 1930s. The 90 degree V8 with downdraft carburetors...

The Pontiac V8 engine is a family of overhead valve 90° V8 engines manufactured by the Pontiac Division of General Motors Corporation between 1955 and...

used a Ford front axle with a Halibrand quick-change rear end. It is powered by a George Riley-designed OHV Ford flathead V8 engine. "1938 Riley Ford Special"...

example, a practical, low-cost V8 engine was not feasible until Ford developed the methods used to build its flathead V8 engine. Other manufacturers then applied...

line, and would be the company's primary engine through 1948. Similar in design to the 90° Ford flathead V8 introduced for 1932, the Lincoln-Zephyr H...

and was related to the Cadillac flathead V8 engine. In 1929, Oldsmobile installed a 90 degree monobloc flathead V8 engine in the Viking companion brand...

by V8 engines. The base engine was the 302 cid V8. The next largest engine was Ford's 351 CID V8, the most common choice. Still larger was Ford's 400...