A gas turbine or gas turbine engine is a type of continuous flow internal combustion engine. The main parts common to all gas turbine engines form the...

A gas turbine locomotive is a type of railway locomotive in which the prime mover is a gas turbine. Several types of gas turbine locomotive have been developed...

electricity the most common type is called a combined cycle gas turbine (CCGT) plant, which is a kind of gas-fired power plant. The same principle is also used...

The Holzwarth gas turbine is a form of explosion, or constant volume, gas turbine where an air–fuel mixture is admitted, ignited and then exhausted from...

the rotor. Gas, steam, and water turbines have a casing around the blades that contains and controls the working fluid. The word "turbine" was coined...

Gas Turbine Research Establishment (GTRE) is a laboratory of the Defence Research and Development Organisation (DRDO). Located in Bengaluru, its primary...

gas turbine engine compressors provide the compression part of the gas turbine engine thermodynamic cycle. There are three basic categories of gas turbine...

rotates a turbine rotor. Each turbine disc has many blades. As such they are used in gas turbine engines and steam turbines. The blades are responsible...

industrial scale. In a simple cycle gas-turbine, also known as open-cycle gas-turbine (OCGT), hot gas drives a gas turbine to generate electricity. This type...

The Union Pacific GTELs were a series of gas turbine-electric locomotives built by Alco-GE and General Electric between 1952-1961 and operated by Union...

may be used to cool the turbine blades, vanes and discs to allow higher turbine entry gas temperatures for the same turbine material temperatures.**...

of gas turbine research" (although General Motors and Rover also built operational turbine cars after World War II). After improving their turbine design...

A radial turbine is a turbine in which the flow of the working fluid is radial to the shaft. The difference between axial and radial turbines consists...

The General Electric LM2500 is an industrial and marine gas turbine produced by GE Aviation. The LM2500 is a derivative of the General Electric CF6 aircraft...

Steam Turbine and its prospective use as a Heat Engine) was published in Berlin in 1903. A further book Dampf und Gas-Turbinen (English: Steam and Gas Turbines)...

0°48′26″W / 51.282957°N 0.807098°W / 51.282957; -0.807098 The National Gas Turbine Establishment (NGTE Pyestock) in Farnborough, part of the Royal Aircraft...

force is typically applied to pistons (piston engine), turbine blades (gas turbine), a rotor (Wankel engine), or a nozzle (jet engine). This force moves...

The Tesla turbine is a bladeless centripetal flow turbine invented by Nikola Tesla in 1913. It functions as nozzles apply a moving fluid to the edges...

The Armengaud-Lemale gas turbine was an early experimental turbine engine built by the Société Anonyme des Turbomoteurs at their facility in Saint-Denis...

primary fuel for gas turbines in large power plants is natural gas. Commonly referred to as a gas turbine, a modern combustion turbine can operate on a...

A closed-cycle gas turbine is a turbine that uses a gas (e.g. air, nitrogen, helium, argon, etc.) for the working fluid as part of a closed thermodynamic...

crankshaft but is instead extracted through either exhaust gas pressure driving a turbine, through driving a linear load such as an air compressor for...

stopped. Gas turbine-mechanical locomotives use a mechanical transmission to deliver the power output of gas turbines to the wheels. A gas turbine locomotive...

The most common current application is in airbreathing jet engines and gas turbine engines. The engine cycle is named after George Brayton (1830–1892),...

The Neuchâtel gas turbine is the world's first electric power-generating gas turbine to go into commercial operation. It was designed and constructed by...

propeller shaft there is one diesel engine for cruising speed and one geared gas turbine for high speed dashes. Both are connected to the shaft with clutches;...

is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes...

A turbine engine failure occurs when a gas turbine engine unexpectedly stops producing power due to a malfunction other than fuel exhaustion. It often...

A turbine–electric transmission system includes a turboshaft gas turbine connected to an electrical generator, creating electricity that powers electric...

exhaust gases, which is extracted by the turbocharger's turbine. The main components of the turbocharger are: Turbine – usually a radial turbine design...