heat pipe is a heat-transfer device that employs phase transition to transfer heat between two solid interfaces. At the hot interface of a heat pipe,...

fundamental rules for all heat exchangers are the same. 1. Double-pipe heat exchanger When one fluid flows through the smaller pipe, the other flows through...

A loop heat pipe (LHP) is a two-phase heat transfer device that uses capillary action to remove heat from a source and passively move it to a condenser...

wick allows heat pipes to transfer heat when there is no gravity, which is useful in space. A thermosiphon is "simpler" than a heat pipe. (Single-phase)...

Heat-pipe tectonics is a cooling mode of terrestrial planets and moons in which the main heat transport mechanism in the planet is volcanism through the...

airflow can result in less dust build up if filtered properly A heat pipe is a heat transfer device that uses evaporation and condensation of a two-phase...

of pipe wall can be expressed as a "heat transfer coefficient of the pipe wall". However, one needs to select if the heat flux is based on the pipe inner...

the heat pipe to the other through pressure, wick forces or gravity, depending on the arrangement of the heat pipe. Run-around systems are hybrid heat recovery...

sinks are the heat exchangers used in refrigeration and air conditioning systems or the radiator in a car. A heat pipe is another heat-transfer device...

using a scarfing blade. The weld zone can also be heat-treated to make the seam less visible. Welded pipe often has tighter dimensional tolerances than the...

protection Copper pipe Domestic water system Double-walled pipe EPA Lead and Copper Rule Fire hose Flange Garden hose HDPE pipe Heat pipe Hose MS Pipe, MS Tube...

pipe, say 80 ˚C and coupled to the return pipe, at e.g. 40 ˚C. By adding a heat pump locally to this user, the 40 ˚C pipe is cooled further (the heat...

used in large chillers or in more particular applications like heat pipe finned heat exchangers. In addition, 1,1-difluoroethane is also commonly used...

A heat pump is a device that consumes energy (usually electricity) to transfer heat from a cold heat sink to a hot heat sink. Specifically, the heat pump...

a heat sink: increase the base thickness, choose a different material with higher thermal conductivity, use a vapor chamber or heat pipe in the heat sink...

heat transfer) is the transfer of heat from one place to another due to the movement of fluid. Although often discussed as a distinct method of heat transfer...

A micro-loop heat pipe or MLHP is a miniature loop heat pipe in which the radius of curvature of the liquid meniscus in the evaporator is in the same...

early Earth's internal heat loss could have been dominated by advection via heat-pipe volcanism. Terrestrial bodies with lower heat flows, such as the Moon...

heater Grease duct Grille Ground-coupled heat exchanger Ground source heat pump Heat exchanger Heat pipe Heat pump Heating film Heating system HEPA High...

Latent heat (also known as latent energy or heat of transformation) is energy released or absorbed, by a body or a thermodynamic system, during a constant-temperature...

refrigerant as a heat transfer medium. The heat pipe uses multiple sealed pipes mounted in a coil configuration with fins to increase heat transfer. Heat is absorbed...

hydronic heating technology, a single-pipe steam system delivers steam to the radiators where the steam gives up its heat and is condensed back to water. The...

active heat spreader speeds up heat transfer with expenditure of energy as work supplied by an external source. A heat pipe uses fluids inside a sealed case...

facilities as of early 2020. The reactor design is a fast-neutron reactor with heat pipe cooling similar to the NASA Kilopower reactor. According to the designers...

A barrier pipe is a type of water pipe with a barrier to prevent undesired contaminants from entering the pipe. When running water supply pipes through...

Sensible heat is heat exchanged by a body or thermodynamic system in which the exchange of heat changes the temperature of the body or system, and some...

Thermodynamics is the branch of physics that studies heat, work, and temperature and their relation to energy, entropy, and the physical properties of...

near a desired setpoint. Thermostats are used in any device or system that heats or cools to a setpoint temperature. Examples include building heating, central...

Evaporative cooler Heat exchanger Heat pipe Heat sink HVAC (Heating, Ventilation and Air Conditioning) Intercooler Radiative cooling in Heat shields Radiators...

and cooling systems distribute heat throughout buildings by means of pipes or ductwork. Insulating these pipes using pipe insulation reduces energy into...