The circuit topology of an electronic circuit is the form taken by the network of interconnections of the circuit components. Different specific values...

The circuit topology of a folded linear polymer refers to the arrangement of its intra-molecular contacts. Examples of linear polymers with intra-molecular...

consisting of electrical elements (e.g., voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network...

electrical current in a circuit. It is typically used to divert current away from a system or component in order to prevent overcurrent. Electrical shunts...

Network topology is the arrangement of the elements (links, nodes, etc.) of a communication network. Network topology can be used to define or describe...

in a series or parallel topology. Whether a two-terminal "object" is an electrical component (e.g. a resistor) or an electrical network (e.g. resistors...

A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch...

Electronic filter topology defines electronic filter circuits without taking note of the values of the components used but only the manner in which those...

Topology (from the Greek words τόπος, 'place, location', and λόγος, 'study') is the branch of mathematics concerned with the properties of a geometric...

together. The circuit can act as an electrical resonator, an electrical analogue of a tuning fork, storing energy oscillating at the circuit's resonant frequency...

An RLC circuit is an electrical circuit consisting of a resistor (R), an inductor (L), and a capacitor (C), connected in series or in parallel. The name...

Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic...

electrical phenomena. Electrical systems are commonly described by means of a circuit diagram. These are network diagrams that describe the topology of...

of two network topologies: Linear topology: For example, A-B-C-D-E, A-B-C-D-E & C-M-N-O (branched at C) are daisy chain. Ring topology: there is a loop...

Electrical resonance occurs in an electric circuit at a particular resonant frequency when the impedances or admittances of circuit elements cancel each...

In electrical circuit theory, a port is a pair of terminals connecting an electrical network or circuit to an external circuit, as a point of entry or...

linear circuit elements are the resistor (R), capacitor (C) and inductor (L). These circuit elements can be combined to form an electrical circuit in four...

In electrical engineering, an unbalanced circuit is one in which the transmission properties between the ports of the circuit are different for the two...

stage. Switched-mode power supplies can be classified according to the circuit topology. The most important distinction is between isolated converters and...

a bridge circuit, it is impossible to simultaneously ground the input and output of this circuit. The Delon circuit uses a bridge topology for voltage...

An electrical ballast is a device placed in series with a load to limit the amount of current in an electrical circuit. A familiar and widely used example...

the electrical functions being connected by cutting out areas of the various layers. Dummer later became famous as "the prophet of integrated circuits",...

A voltage multiplier is an electrical circuit that converts AC electrical power from a lower voltage to a higher DC voltage, typically using a network...

a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to...

ratings. Diodes are also used in bridge topologies along with capacitors as voltage multipliers. The diode bridge circuit was invented by Karol Pollak and patented...

inverting topology, the output voltage is of the opposite polarity than the input. This is a switched-mode power supply with a similar circuit configuration...

lumped-element model simplifies the system or circuit behavior description into a topology. It is useful in electrical systems (including electronics), mechanical...

A resistor–capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors. It may be driven by...

asynchronous circuit A digital circuit where states propagate through a circuit without a synchronizing clock impulse. audio and video connector An electrical fitting...

in 1983, defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced,...