A flange nut is a nut that has a wide flange at one end that acts as an integrated washer. This serves to distribute the pressure of the nut over the part...

nut (K-nut or washer nut) with a star-type lock washer Nyloc plate nut Polymer insert nut (Nyloc) Security locknut Serrated face nut Serrated flange nut...

A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam...

insert nut (Nyloc nut) Security locknut All steel reusable nut for high vibration and harsh environments. Serrated face nut Serrated flange nut Speed nut (sheet...

scratched. Sometimes both faces of the nut are serrated, permitting either side to lock. Serrated flange nut Barrett, Rich, Fastener Design Manual (PDF)...

type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface. It has a long, thin body and a flange at one end...

Injection-molded parts Instrument cluster Label Mirror Phone Mount Name plate Nut Flange nut Hex nut O-ring Paint Rivet Rubber (extruded and molded) Screw Shim Sun visor...

nut, also known as a k-nut, is a special type of hex locknut that is commonly used in the aerospace and automotive racing industries. It has a flange...

shaped as either a rectangle, a flange nut, or a hex nut; the rectangular speed nut is also known as a flat-style speed nut. Speed nuts that attach to the...

Rawlnut or Rawl nut, the name by which they are known in the UK.[citation needed] A well nut consists of a flanged neoprene bushing with a nut embedded in...

the mating flange: 347  flange adapters which attach to a polyethylene pipe with butt fusion to stiffen a junction and allow another flanged pipe or fitting...

into the barrel nut from outside the sheet metal. They are preferred over a standard nut and bolt, because they do not require a flange to be machined...

the bushing (if any), wheel, paper blotters, steel flanges, and nut are assembled, and the nut is tightened, not as hard as possible, but enough to...

small flange on the edge of the sheet metal. The threads are from an integrated nut that has a special boss to sit in a hole in the sheet metal. A J-nut is...

of screw and post, which are a machine screw and a nut that is barrel-shaped. The nut has a flange and a protruding boss that is internally threaded....

used in high torque applications. Flange head fasteners: Integrating a flange for a larger bearing surface, flange head fasteners distribute clamping...

pass through easily to connect to an internally threaded component (e.g. a nut) on the other side. That is, an M6 screw has a nominal outer diameter of...

fluid from reaching the nut. Larger sizes of compression fitting do not have a single nut to compress the ferrule but a flange with a ring of bolts that...

applying a twisting force (torque) to a matching nut. The bolt has an external male thread requiring a matching nut with a pre-formed female thread. Unlike a...

diameter with an integral flange towards one end, and threaded at the opposite end. Work is gripped between the flange and a nut on the thread. A tapered...

with a threaded nut behind the gasket, but with gasket position adjustable as needed. This pipe end fits loosely into another with a flange for the gasket...

Castellated nut/capscrew (common in the aircraft industry) Flanges (bolted in pairs) Junker test Locknut (prevailing torque nuts) Nyloc nut Distorted thread...

is that the latter is designed to be tightened or released by torquing a nut. The screw head on one end has a milled slot that commonly requires a tool...

distance between two parallel surfaces on the head of a screw or bolt, or a nut, mostly for torque transmission by positive locking. The term width across...

non-perpendicular surface. If this is not feasible then a self-aligning nut may be required. By comparison, a countersink makes a conical hole and is...

technique similar to flash welding where a fastener or specially formed nut is welded onto another metal part, typically a base metal or substrate. The...

vertical space is limited. Gate valves may have flanged ends drilled according to pipeline-compatible flange dimensional standards. Gate valves are typically...

wrench with a U-shaped opening that grips two opposite faces of the bolt or nut. This wrench is often double-ended, with a different-sized opening at each...

"All or Nothing" and "Tin Soldier", as well as their concept album Ogdens' Nut Gone Flake. They evolved into one of the UK's most successful psychedelic...

with a 1/4 in (0.25 inches (6.4 mm)) flanged hex head. Non-standard metricized 5.5 millimetres (0.22 in) flanged hex heads can also be encountered. Also...