A hotend is a component used in fused filament deposition 3D printers. Its purpose is to heat up and melt filament material for depositing into the intended...

direct-drive extruder, the motor pushing the filament is installed by the hotend and pushes the filament directly into the nozzle. Direct-drive designs have...

elastic. Since TPU is a thermoplastic, it can be melted by the 3D printer's hotend, printed, then cooled into an elastic solid. TPU powders are also used for...

moisture caused damages such as popping and sizzling when passing thru the hotend and turning into steam. Moisture soaked filament also becomes brittle or...

thermoplastic is heated past its glass transition temperature inside the hotend. The filament is extruded and deposited by an extrusion head onto a build...

introduced by mechanical pressure from rollers, into the liquefier (or hotend), where it melts and is then extruded. Flow geometry of the extruder, heating...

filament. The filament is available in many colors. Although the Printrbot hotend and extruder system is advertised to work with PLA and ABS, it is also capable...

polyetherimide print surface, Rambo controller board and an E3D V6 Full hotend. The Prusa MK2 became the first RepRap printer to be supported by Windows...

this musical genius." Composed by Julius Hemphill. "Countryside" – 10:07 "Hotend" – 12:30 "OK Rubberband" – 9:23 "Antecedent" – 8:16 "Kansas City Line" –...

based on a Core XY framework with an open design, heated bed and E3Dv6 hotend. The F306 build area can accommodate prints up to 12"x12"x12" (1 cubic foot)...

Roger V. (December 2023). "Local composition control using an active-mixing hotend in fused filament fabrication". Additive Manufacturing Letters. 7: 100177...