The IBM Network Control Program, or NCP, was software that ran on a 37xx communications controller and managed communication with remote devices. NCP...

the Network Control Protocol IBM Network Control Program This disambiguation page lists articles associated with the title Network Control Program. If...

communication system They were supported by IBM 3704/3705 communication controllers and their Network Control Program (NCP), and by System/370 and their VTAM...

The IBM 473L Command and Control System (473L System, 473L colloq.) was a USAF Cold War "Big L" Support System with computer equipment at The Pentagon...

The IBM 3270 is a family of block oriented display and printer computer terminals introduced by IBM in 1971 and normally used to communicate with IBM mainframes...

internal or external modem The base unit of the 3790 was the IBM 3791 programmable control unit, which was offered as a choice of: the model 1, supporting...

research laboratory and facility in Pakistan IBM Network Control Program, a program run on IBM programmable communications controllers NCP Engineering,...

Control IBM 7605: IBM 7070/IBM 7074 Disk Control IBM 7631: IBM 1410/IBM 7010, IBM 7070/IBM 7074, IBM 7080 File Control IBM 7640: IBM 7074/IBM 7080 Hypertape...

4 Mbit/s Token Ring network adapter or 10BASE2 Ethernet adapter. For running CADAM, a computer-aided design (CAD) program, an IBM 5080 or 5085 graphics...

IBM MQ. The products that are included in the MQ family are IBM MQ, IBM MQ Advanced, IBM MQ Appliance, IBM MQ for z/OS, and IBM MQ on IBM Cloud. IBM MQ...

the IBM RS/6000 series and later Power and PowerPC-based systems, IBM System i, System/370 mainframes, PS/2 personal computers, and the Apple Network Server...

IBM 5250 is a family of block-oriented terminals originally introduced with the IBM System/34 midrange computer systems in 1977. It also connects to the...

bootstrap program by pressing a single button. This booting concept was called a variety of names for IBM computers of the 1950s and early 1960s, but IBM used...

application, a computer reservations system, executing under the control of IBM Airline Control Program (ACP) (and later its successor, Transaction Processing Facility...

PL/S, short for Programming Language/Systems, is a "machine-oriented" programming language based on PL/I. It was developed by IBM in the late 1960s, under...

Ring Network. IBM's Token Ring technology brings a new level of control to local area networks and quickly becomes an industry standard for networks that...

The IBM System/3 was an IBM midrange computer introduced in 1969, and marketed until 1985. It was produced by IBM Rochester in Minnesota as a low-end...

and DPCX) and was a follow-on to the IBM 3790. The 8100, when used with the Distributed Processing Programming Executive (DPPX), was intended to provide...

These included: IBM System/7 (semiconductor memory, process control, incompatible replacement for IBM 1800 IBM Series/1 IBM 3790 IBM 8100 IBM System/3 (Introduced...

IBM i (the i standing for integrated) is an operating system developed by IBM for IBM Power Systems. It was originally released in 1988 as OS/400, as...

using synchronous transmit-receive (STR). In addition, IBM has developed workstation programs for the 1130, 360/20, 2922, System/360 other than 360/20...

IBM Advanced Peer-to-Peer Networking (APPN) is an extension to the Systems Network Architecture (SNA) "that allows large and small computers to communicate...

by IBM. The SAA initiative was started in 1987 under the leadership of Earl Wheeler, the "Father of SAA". The intent was to implement SAA in IBM operating...

Apollo program, and the first version on the IBM System/360 Model 65 was completed in 1967 as ICS/DL/I and officially installed in August 1968. IBM rebranded...

three IBM-supplied programs. Emulation Program (EP) mimicked the operation of the older IBM 270x non-programmable controllers. Network Control Program (NCP)...

runs unmodified IBM Network Control Program (NCP) to allow consolidation of an SNA network infrastructure to IP. According to IBM "SNA traffic enters...

CPCS (Check Processing Control System) is an IBM software product that supports high-speed check sorting within financial institutions. The software works...

computer keyboard command on IBM PC compatible computers, invoked by pressing the Delete key while holding the Control and Alt keys: Ctrl+Alt+Delete...

Input/Output Control System (IOCS) packages for the IBM 7090/7094[citation needed] and even more so by the PR155 Operating System for the IBM 1410/7010 processors...

Job Control Language (JCL) is a scripting language used on IBM mainframe operating systems to instruct the system on how to run a batch job or start a...