IEEE 802.1Q, often referred to as Dot1q, is the networking standard that supports virtual local area networking (VLANs) on an IEEE 802.3 Ethernet network...

IEEE 802.1ad is an amendment to the IEEE 802.1Q-1998 networking standard which adds support for provider bridges. It was incorporated into the base 802...

Forwarding (Clause 11)". IEEE. Archived from the original on August 6, 2011. 802.1Q ieee802.org [dead link] "IEEE 802.1: 802.1Qbh - Bridge Port Extension"...

into a major revision of the standard, IEEE 802.1D-1998, which subsequently was incorporated into IEEE 802.1Q-2014 standard. The work also required a...

been incorporated into either IEEE 802.1Q-2014 (Bridges and Bridged Networks) or IEEE 802.1AC (MAC Service Definition). 802.1D is expected to be officially...

IEEE 802.1aq is an amendment to the IEEE 802.1Q networking standard which adds support for Shortest Path Bridging (SPB). This technology is intended to...

Reservation Protocol over IEEE 802.11) IEEE 802.11ak Enhancements for Transit Links Within Bridged Networks (802.11 links in 802.1Q networks) Bounded latency:...

Ethernet networks. The majority of projects define extensions to the IEEE 802.1Q – Bridges and Bridged Networks, which describes virtual LANs and network...

802.1Qat and 802.1Qav amendments have been incorporated to the base IEEE 802.1Q-2011 document, which specifies the operation of Media Access Control...

(FCS). The IEEE 802.1Q tag or IEEE 802.1ad tag, if present, is a four-octet field that indicates virtual LAN (VLAN) membership and IEEE 802.1p priority...

and multiple spanning tree (802.1s) has since been incorporated into IEEE 802.1Q-2014. While STP is still in use today, in most modern networks its primary...

VLAN information in an IEEE 802.10 frame header, contrary to the purpose of the IEEE 802.10 standard. Both ISL and IEEE 802.1Q perform explicit tagging...

technologies was based on IEEE 802.10; in this application 802.10 has largely been replaced by IEEE 802.1Q. The standard being developed has 8 parts: a. Model...

IEEE 802.1ah is an amendment to the IEEE 802.1Q networking standard which adds support for Provider Backbone Bridges. It includes an architecture and...

IEEE 802.1ag is an amendment to the IEEE 802.1Q networking standard which introduces Connectivity Fault Management (CFM). This defines protocols and practices...

(GARP), is a generic registration framework defined by the IEEE 802.1ak amendment to the IEEE 802.1Q standard. MRP allows bridges, switches or other similar...

the size of some Ethernet frames. EtherType is also used as the basis of 802.1Q VLAN tagging, encapsulating packets from VLANs for transmission multiplexed...

IEEE 802.3 is a working group and a collection of standards defining the physical layer and data link layer's media access control (MAC) of wired Ethernet...

IEEE 1588-2008 for time synchronization over a virtual bridged local area network as defined by IEEE 802.1Q. In particular, 802.1AS defines how IEEE 802...

IDs between switches and routers. With IEEE 802.1Q the tag is internal. This is a key advantage for IEEE 802.1Q as it means tagged frames can be sent over...

White Paper. Cisco Systems. June 2009. Retrieved May 10, 2011. IEEE 802.1Qbb "IEEE 802.1Q Priority-based Flow Control". Institute of Electrical and Electronics...

IEEE 802.15.4 is a technical standard that defines the operation of a low-rate wireless personal area network (LR-WPAN). It specifies the physical layer...

standardize on an overlay encapsulation protocol. Compared to single-tagged IEEE 802.1Q VLANs which provide a limited number of layer-2 VLANs (4094, using a...

encapsulation to be used. VLAN trunks formed using DTP may utilize either IEEE 802.1Q or Cisco ISL trunking protocols. DTP should not be confused with VTP...

2013). IANA Considerations and IETF Protocol and Documentation Usage for IEEE 802 Parameters. Internet Engineering Task Force (IETF). doi:10.17487/RFC7042...

(PBB-TE) is a computer networking technology specified in IEEE 802.1Qay, an amendment to the IEEE 802.1Q standard. PBB-TE adapts Ethernet to carrier class transport...

frame this adds a protocol overhead of 18 bytes, or 22 bytes with an IEEE 802.1Q tag for VLAN tagging or class of service. The MTU should not be confused...

bandwidth is left over. At the medium access control (MAC) layer, VLAN IEEE 802.1Q and IEEE 802.1p can be used to distinguish between Ethernet frames and classify...

September 2010 SRP was standardized as IEEE 802.1Qat which has subsequently been incorporated into IEEE 802.1Q-2011. SRP defines the concept of streams...

of learning bridges (IEEE 802.1D) to further enhance efficiency in point to multipoint applications and VLAN tagging (IEEE 802.1Q). One drawback of the...