ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...

The ISO 9000 family is a set of five quality management systems (QMS) standards by the International Organization for Standardization (ISO) that help organizations...

allows for up to 0.87 mm of variation in size. The ISO 286 defines the international tolerances grades for nominal sizes up to 3.15 meters as follows: From...

"Grade Markings: Carbon Steel Bolts". Retrieved 2009-05-30. "Hardware, bulk — Technical information". Retrieved 2009-05-30. "ASTM, SAE and ISO grade markings...

The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards...

Federal Grades 0.5, 1, and 2 and ISO grades K, 00, and 0 no oil or color should be visible under the gauge block. For Federal Grade 3 and ISO grades 1 and...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings It is an ISO standard...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 2852 Stainless steel clamp pipe couplings for the food industry was an international standard that defines a non-permanent sanitary food-grade piping...

Mondopoint" and ISO 3355:1975 "Shoe sizes – System of length grading (for use in the Mondopoint system)". ISO 9407:2019, "Shoe sizes—Mondopoint system of sizing...

Construction "ASTM A325 - Portland Bolt". Retrieved 2009-06-13.. ASTM, SAE and ISO grade markings and mechanical properties for steel fasteners, retrieved 2009-06-06...

ISO 3103 is a standard published by the International Organization for Standardization (commonly referred to as ISO), specifying a standardized method...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

with ISO 3506 (not to be confused with A2 tool steel). The Japanese equivalent grade of this material is SUS304. Type 304L—same as the 304 grade but lower...

alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names:...

profile roughness parameters are included in BS EN ISO 4287:2000 British standard, identical with the ISO 4287:1997 standard. The standard is based on the...

SAE International as part of its SAE steel grades. It is also known as: 4301-304-00-I and X5CrNi18-9, the ISO 15510 name and designation. UNS S30400 in...

numerical scales, the most recent being the ISO system introduced in 1974. A closely related system, also known as ISO, is used to describe the relationship...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

(SAE). American steel grades : AISI/SAE steel grades standard British Standards International Organization for Standardization ISO/TS 4949:2016 European...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

consistency number is also a component of the code specified in standard ISO 6743-9 “lubricants, industrial oils and related products (class L) — classification...

adopted by the ISO in 1949 to form the ISO Recommendation R3, first published in 1953 or 1954, which evolved into the international standard ISO 3. The factor...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

22331:2018". ISO. "ISO 22380:2018". ISO. "ISO 22381:2018". ISO. "ISO 22382:2018". ISO. 5 December 2018. "ISO 22392:2020". ISO. "ISO 22395:2018". ISO. 30 October...

high-grade saffron. In addition to descriptions based on how the saffron is picked, saffron may be categorised under the international standard ISO 3632...

cargo. It is built to the ISO standards, making it suitable for different modes of transportation; as such, it is also called an ISO tank. Both hazardous and...

current one is ISO 20345:2011 - previously ISO 20345:2004. The codes applicable to European safety footwear are: There is also EN ISO 20346:2004 for protective...