A miter saw or mitre saw is a saw used to make accurate crosscuts and miters in a workpiece by positioning a mounted blade onto a board. A miter saw in...

until the introduction of the power miter saw in the 1970s. In addition to making length cuts, a radial arm saw may be configured with a dado blade to...

the second piece in the opposite direction. Mason's miter Miter box Miter clamp Miter saw Miter square Pipe notching Oxford English Dictionary. Oxford...

stock using a miter more difficult (the miter and/or stock may not be fully supported by the table in front of the blade). Benchtop saws are the smallest...

thin materials. Electric miter saw or "chop saw," or "cut-off saw" or "power miter box": for making accurate cross cuts and miter cuts. The basic version...

cut off saw, cutoff saw, or chop saw can refer to two distinct classes of power tools. A miter saw, typically used in woodworking An abrasive saw, typically...

saws (the combination of a compound miter and table saw) Miter saw (chop saw, cut-off saw) Multi-tool (powertool) Panel saw Pendulum saw or swing saw...

have a table saw, which is used for rip cutting, and a separate chop or miter saw, which is used for crosscutting. Crosscut power-saws should never be...

Columbia, Canada Serial Copy Management System Sliding compound miter saw, a type of miter saw Smart card management system Society for Cinema and Media Studies...

later. Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest...

Reamer Sandpaper Saw Abrasive saw Bandsaw Chainsaw Circular saw Concrete saw Coping saw Fretsaw Hacksaw Hand saw Hole saw Miter saw Wire saw Scalpel Scissors...

of both joint members. The terms "back mitre" and "mason's mitre" (or "miter") are often used interchangeably, but are different types of joints, and...

A crosscut saw (thwart saw) is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small...

A keyhole saw (also called a pad saw, alligator saw, jab saw or drywall saw) is a long, narrow saw used for cutting small, often awkward features in various...

backsaw A hand saw that has a steel reinforced spine to add rigidity and strength to the saw plate. Typically used in a miter (mitre) box, this saw is used for...

washer permanently attached and reversed threading. Designed for use in miter saw and other tools to auto tighten during use to prevent blade fall out....

A chainsaw (or chain saw) is a portable handheld power saw that cuts with a set of teeth attached to a rotating chain driven along a guide bar. Modern...

saws. A modern bow saw is a metal-framed crosscut saw in the shape of a bow with a coarse wide blade. This type of saw is also known as a Swede saw,...

A ripsaw (or rip saw) is a wood saw that is specially designed for making a rip cut, a cut made parallel to the direction of the wood grain. The cutting...

Japanese saw or nokogiri (鋸) is a type of saw used in woodworking and Japanese carpentry that cuts on the pull stroke, unlike most European saws that cut...

The dual column setup is unable to make use of a miter base due to inherent design. Dual column saws are the largest variety of machine bandsaws encountered...

complex cuts at standard angles, typically done with powered compound miter saws that feature detents at these angles to aid the user. An alternative method...

A miter gauge is a device used for holding workpieces at a set angle while being cut on table saws, band saws or sanded on stationary disk sanders. The...

Reamer Sandpaper Saw Abrasive saw Bandsaw Chainsaw Circular saw Concrete saw Coping saw Fretsaw Hacksaw Hand saw Hole saw Miter saw Wire saw Scalpel Scissors...

all mitre saws are backsaws, and the electric mitre saw (or chop saw) has largely taken its place today. Tenon saw – a midsized backsaw. The saw derives...

manufacture in Milwaukee. In 1966, Rockwell invented the world's first power miter saw. In 1981, Rockwell's power tool group was acquired by Pentair and re-branded...

Domino jointer Chain saw Hand-held circular saw Electric drill Jig saw Miter saw Nail gun Hand-held electric plane Reciprocating saw Rotary tool Router...

panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up...

Carcase butt joints Crosscut saw Circular saw and straightedge Table saw Frame butt joints Crosscut backsaw Miter saw Table saw using a mitre gauge, crosscut...

In woodworking and carpentry, hand saws, also known as "panel saws", are used to cut pieces of wood into different shapes. This is usually done in order...