American National Standard Pipe Thread standards, often called national pipe thread standards for short, are United States national technical standards...

A threaded pipe is a pipe with screw-threaded ends for assembly. The threaded pipes used in some plumbing installations for the delivery of gases or liquids...

British Standard Pipe (BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes...

is often incorrectly called National Pipe Size, due to confusion with the American standard for pipe threads, "national pipe straight", which also abbreviates...

common pipe thread in North America is the National Pipe Thread (NPT) or the Dryseal (NPTF) version. Other pipe threads include the British Standard Pipe Thread...

A pipe wrench is any of several types of wrench that are designed to turn threaded pipe and pipe fittings for assembly (tightening) or disassembly (loosening)...

of Microsoft Server 2008 National pipe straight, a non-taper pipe thread among the national pipe thread standards Nominal Pipe Size, a North American set...

British thread standard with 55° profile. Buttress thread Engineering tolerance Garden hose thread List of drill and tap sizes National pipe thread (NPT)...

Whitworth ISO metric screw thread List of drill and tap sizes List of screw drives List of thread standards National pipe thread Nut (hardware) William Sellers...

Dryseal Pipe Threads Form Filter thread Metric: M Profile Thread Form National Thread Form Nut (hardware) Tapered thread Tap and die Thread angle Thread pitch...

AS4841 through AS4843 and AS4875. Flare fitting National pipe thread O-ring boss seal Threaded pipe "AN Fitting Types | ColorFittings". Retrieved 2020-08-05...

washers, fountains, and eye wash stations. Threaded pipe joints are sealed with thread seal tape or pipe dope. Many plumbing fixtures are sealed to their...

nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings. The...

producing threaded components. ISO metric screw thread "History of standardization" section of the screw thread article National pipe thread Degarmo, Black...

NPT to BSP pipe threads are available a fitting that connects threaded and non-threaded pipe An elbow is installed between two lengths of pipe (or tubing)...

types of thread standards used: Panzergewinde (PG standard) Metric thread National Pipe Thread (inch system) Electrical connector Pipe thread Steel conduit...

industry, manufacturing industry, and other commercial and industrial contexts, pipe marking is used to identify the contents, properties and flow direction of...

copper, PVC, CPVC, polyethylene, and galvanized pipe, which is typically glued, soldered, or threaded. Other types of piping systems include steam, ventilation...

receptacle. Pipe connections are either 1.25" or 1.5", National Pipe Thread (NPT), and a level control to allow for automatic operation; A section of pipe to carry...

"male hose thread"). This fitting is used with 1⁄2-inch, 5⁄8-inch, and 3⁄4-inch hoses. In other countries, a British Standard Pipe (BSP) thread is used,...

the nominal pipe size (NPS) system. It is commonly available with national pipe thread ends or with plain cut ends. It can be used for steam, water, and...

engineering, the thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis. This is a defining...

valves. Typically, automated globe valves use smooth stems rather than threaded and are opened and closed by an actuator assembly. Although globe valves...

for sealing pipe threads. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads. Thread seal tape lubricates...

of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened...

etc.) together. Alternatively it is a short length of pipe with two female National pipe threads (NPT) (in North American terms, a coupler is a double...

political party in the 1960s Male Iron Pipe, a plumbing pipe connection to an FIP (Female Iron Pipe); see National Pipe Thread Mega-frame Initialization Packet...

would be used to join sections of pipe. Plumbing codes regulate the use of street elbows. For example, Canada's national plumbing code prohibits them in...

densely populated areas where rainwater (from house roofs) is directly piped into the system, as opposed to being allowed to be absorbed by the soil...

marking positions for pipe connections, passage holes, and fixtures in walls and floors Measuring, cutting, bending, and threading pipes using hand and...