The pound per square inch (abbreviation: psi) or, more accurately, pound-force per square inch (symbol: lbf/in2), is a unit of measurement of pressure...

common unit of pressure, pound per square inch (psi) is derived from this unit of area. 1 square inch (assuming an international inch) is equal to: (the overbars...

for the difference between the two physical properties Newton Poundal Pounds per square inch, a unit of pressure Despite its name, this system is based on...

kilogram-force per centimetre square (kgf/cm2), often just kilogram per square centimetre (kg/cm2), or kilopond per centimetre square (kp/cm2) is a deprecated...

forces. Bar (unit) Centimetre or millimetre of water Inch of mercury Inch of water Pound per square inch Torr BS 350: Part 1: 1974 – Conversion factors and...

as 1013.25 mbar, 101.325 kPa, 1.01325 bar, which is about 14.7 pounds per square inch. Despite the millibar not being an SI unit, meteorologists and weather...

Oluwatosin Ayoyinka Olumide Abasi (born January 7, 1983), is an American musician, best known as the founder and lead guitarist of the instrumental progressive...

The foot–pound–second system (FPS system) is a system of units built on three fundamental units: the foot for length, the (avoirdupois) pound for either...

available ≈ 406.782 in H2O, 4 °C ≈ 14.6959 pounds-force per square inch (lbf/in2) ≈ 2116.22 pounds-force per square foot (lbf/ft2) = 1 ata (atmosphere absolute)...

10000 kg/m2. With the pound and inch legally defined as 0.45359237 kg and 0.0254 m respectively, it follows that the (mass) pounds per square inch is approximately:...

mass at the rate of one metre per second squared in the direction of the applied force. The units "metre per second squared" can be understood as measuring...

Pressure 1 inch of mercury = the pressure produced by 1 inch height of mercury = 3,386.39 pascals (33.8639 hPa, millibars) 1 pound per square inch (psi) ≈...

are often measured in inches of water when at low pressure. This is in contrast to inches of mercury or pounds per square inch (psi, lbf/in2) for larger...

slinch (a portmanteau of the words slug and inch), slugette, or snail. It is equivalent to 386.0886 pounds (175.1268 kg) based on standard gravity. Similar...

saturating them with 100-pound-per-square-inch (690 kPa) steam, then increasing the steam or air pressure to 400 pounds per square inch (2,800 kPa) and suddenly...

poundal is defined as the force necessary to accelerate 1 pound-mass at 1 foot per second squared.: 54  1 pdl = 0.138254954376 N exactly. English units require...

Stability Index (Kullback–Leibler divergence#Symmetrised divergence) Pound per square inch, unit of pressure PSI (computational chemistry), software J/psi...

and engineering. Atmosphere (unit) Centimetre of water Conversion of units Inch of mercury Outline of the metric system Pascal (unit) Pressure head Pressure...

a boiler pressure rating of 175 pounds per square inch (1,210 kilopascals) compared to the 160 pounds per square inch (1,100 kilopascals) of the P class...

of volume at 60 degrees Fahrenheit (15.56 °C; 288.71 K) and 14.7 pounds per square inch (PSI) (1.01 bar; 101.35 kPa) of pressure.[citation needed] Board...

150 pounds per square inch (1,000 kPa) – but these had technical problems and had to be replaced with ones that ran at 90 pounds per square inch (620 kPa)...

pressure of only 13,000 pounds per square inch (90 MPa), giving a muzzle velocity of approximately 725 ft/s (221 m/s) from a 4-inch (100 mm) barrel. This...

parentheses following the unit, for example 101 kPa (abs). The pound per square inch (psi) is still in widespread use in the US and Canada, for measuring...

front of the car is 0.0555 pounds per square inch (383 Pa), about 0.38% of the static pressure (14.696 pounds per square inch (101,330 Pa) at sea level)...

Overpressure Effects 1 pound per square inch (6.9 kPa; 0.069 bar) Window glass shatters Light injuries from fragments occur 2 pounds per square inch (14 kPa; 0.14 bar)...

density and is usually expressed in yards per pound (yd/lb). Number of twists per inch. Number of twists per metre. There are two systems used for presenting...

of 150 pounds per square inch (10 bar) or less Medium-pressure compressors which have a discharge pressure of 151 to 1,000 pounds per square inch (10.4...

pressure is the megapascal (MPa), while the American SAAMI uses the pound per square inch (psi, symbol lbf/in2) and the European CIP uses bar (1 bar is equal...

measure, for example the unit of pressure is the pounds [force] per square inch. Apart from the poundal, most of the named units of measure are non-coherent...

pounds per square inch (386–455 kPa), but up to 74 pounds per square inch (510 kPa) is possible. The manifold is fitted with a 200 pounds per square inch...