The Statnamic load test is a type of test for assessing the load-carrying capacity of deep foundations which is faster and less expensive than the static...

differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower. Static load testings are performed in...

among the deepest in the world. The Statnamic load test conducted at Pier 24 was the biggest Statnamic load test ever conducted in the world at 54MN....

A sieve analysis (or gradation test) is a practice or procedure used in geology, civil engineering, and chemical engineering to assess the particle size...

– Specified load – Spontaneous combustion – State of matter – Static load testing – Statical determinacy – Statics – Statnamic load test – Stave (wood)...

than the original 1954 bridge. To test the performance of the pilings, the crew performed the first statnamic load test in the state of New Jersey. Construction...

are often determined using some combination of field tests (e.g., aquifer tests) and laboratory tests on aquifer material samples. Recently, these properties...

Laboratory tests using soil samples subjected to hydraulic experiments Field tests (on site, in situ) that are differentiated into: small-scale field tests, using...

loading. A typical reference strain for the approximate occurrence of zero effective stress is 5% double amplitude shear strain. This is a soil test-based...

situ) Core drill Cone penetration test Geo-electrical sounding Permeability test Load test Static Dynamic Statnamic Pore pressure measurement Piezometer...

characteristics Multiphase fluid flow in porous media Florida Method of Test For Concrete Resistivity as an Electrical Indicator of its Permeability Archived...

buildings made with clay, often baked into brick, as an essential part of its load-bearing structure. Clay is a very common substance. Shale, formed largely...

situ) Core drill Cone penetration test Geo-electrical sounding Permeability test Load test Static Dynamic Statnamic Pore pressure measurement Piezometer...

than the original 1954 bridge. To test the performance of the pilings, the crew performed the first statnamic load test in the state of New Jersey. Construction...

situ) Core drill Cone penetration test Geo-electrical sounding Permeability test Load test Static Dynamic Statnamic Pore pressure measurement Piezometer...

sculpting shapes out of moist sand Sand Beach (disambiguation) Sand equivalent test Sand island – Island that is largely made of sand Sand mining – Practice...

the vadose zone to be deposited in pore space. ASTM American Standard of Testing Materials: 200 sieve – 0.005 mm. USDA United States Department of Agriculture...

Earthquake engineering Mitigation of seismic motion Neotectonics Seismic loading Seismic performance Vibration control Baker, Jack; Bradley, Brendon; Stafford...

stability, and a narrow stem with graduations for measuring. The liquid to test is poured into a tall container, often a graduated cylinder, and the hydrometer...

was awarded in August 2013. Preliminary statnamic load testing on the riverbed occurred in February 2015 to test the stability of the bridge foundation...

tests measure the "accessible void", the total amount of void space accessible from the surface (cf. closed-cell foam). There are many ways to test porosity...

and Pore Size Distribution in Kaolinitic Remolded Clays under Triaxial Loading". International Journal of Geomechanics. 20 (6): 04020057. doi:10.1061/(asce)gm...

monitoring wells or piezometers. Samples collected from boreholes are often tested in a laboratory to determine their physical properties, or to assess levels...

of cave-in increases from surcharge load, which is any weight placed outside the trench near its edge. These loads include the spoil pile (soil excavated...

also commonly used. From the Annual Book of ASTM (American Society for Testing and Materials) Standards, the total evaporable moisture content in Aggregate...

situ) Core drill Cone penetration test Geo-electrical sounding Permeability test Load test Static Dynamic Statnamic Pore pressure measurement Piezometer...

properties—it cannot be easily compacted to serve as a stable foundation to support loads, such as roads or buildings. In a widely cited article, Joosten and Clarke...

volume change tendency. Suppose the void ratio is high (loose soils). Under loading, voids in the soil skeleton tend to decrease (shrinkage), increasing the...

mining; earthwork (e.g. by altering the shape of a slope, or imposing new loads); in shallow soils, the removal of deep-rooted vegetation that binds colluvium...

situ) Core drill Cone penetration test Geo-electrical sounding Permeability test Load test Static Dynamic Statnamic Pore pressure measurement Piezometer...