Centrifugal compressors, sometimes called impeller compressors or radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery...
61 KB (7,523 words) - 13:58, 1 October 2024
differs from other rotating compressors such as centrifugal compressor, axi-centrifugal compressors and mixed-flow compressors where the fluid flow will...
33 KB (5,121 words) - 09:24, 9 July 2024
Compressor surge is a form of aerodynamic instability in axial compressors or centrifugal compressors. The term describes violent air flow oscillating...
11 KB (1,542 words) - 23:35, 24 May 2024
compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor...
49 KB (6,847 words) - 04:49, 1 August 2024
basic categories of gas turbine engine compressor: axial compressor, centrifugal compressor and mixed flow compressor. A fourth, unusual, type is the free-piston...
6 KB (756 words) - 07:12, 25 October 2023
Vapor-compression refrigeration (redirect from Compressor refrigerator)
converting it to pressure energy. Chillers with centrifugal compressors have a 'Centrifugal Compressor Map' that shows the "surge line" and the "choke...
31 KB (3,576 words) - 00:54, 14 June 2024
and race applications. While the first practical centrifugal compressor was designed in 1899, centrifugal superchargers evolved during World War II with...
8 KB (1,098 words) - 22:01, 22 May 2024
Turbojet (redirect from Centrifugal-flow turbojet)
patent showed a two-stage axial compressor feeding a single-sided centrifugal compressor. Practical axial compressors were made possible by ideas from...
28 KB (3,494 words) - 20:14, 30 September 2024
screw compressor Rotary vane pump Scroll compressor Centrifugal (roto-dynamic or turbo) compressor Axial compressor, often used in jet engines. Another way...
13 KB (1,536 words) - 07:22, 3 October 2024
movers": Gas turbine / Centrifugal Compressor uses a natural gas-fired turbine to turn a centrifugal compressor. The centrifugal compressor is similar to a large...
7 KB (833 words) - 18:06, 9 October 2024
an axial compressor at the same time. They also occur in a centrifugal compressor at entry to the impeller and in the diffuser. The compressor design point...
41 KB (6,246 words) - 00:01, 11 February 2024
Centrifugal clutch Centrifugal compressor Centrifugal evaporator Centrifugal extractor Centrifugal fan Centrifugal force Centrifugal force (rotating reference...
1 KB (147 words) - 23:35, 22 July 2017
engine layout, he based it for compactness on a centrifugal impeller (centrifugal or radial compressor) and a radial inflow turbine. Ultimately, this configuration...
36 KB (4,431 words) - 02:43, 5 October 2024
patent showed a two-stage axial compressor feeding a single-sided centrifugal compressor. Practical axial compressors were made possible by ideas from...
21 KB (2,921 words) - 13:05, 27 August 2024
Impeller (section In centrifugal compressors)
especially when creating suction in a pump or compressor. An impeller is a rotating component of a centrifugal pump that accelerates fluid outward from the...
11 KB (1,291 words) - 10:36, 13 March 2024
versions have seven axial compressor stages mounted on the HP shaft to supercharge a relatively low-pressure-ratio centrifugal compressor. The -C20B is typical...
12 KB (1,322 words) - 15:57, 24 September 2024
A compressor stall is a local disruption of the airflow in the compressor of a gas turbine or turbocharger. A stall that results in the complete disruption...
16 KB (2,212 words) - 00:04, 19 June 2024
heat. Centrifugal compressor Diving air compressor Vapor-compression refrigeration Bloch, H.P. & Hoefner, J.J. (1996). Reciprocating Compressors, Operation...
3 KB (290 words) - 21:00, 21 June 2024
of different types of compressors. Most common today are the hermetic scroll, semi-hermetic screw, or centrifugal compressors. The condensing side of...
26 KB (3,197 words) - 11:43, 28 August 2024
Compressor characteristic is a mathematical curve that shows the behaviour of a fluid going through a dynamic compressor. It shows changes in fluid pressure...
17 KB (2,600 words) - 02:22, 27 January 2024
This was a relatively large machine which included a 25 stage centrifugal compressor designed by Auguste Rateau and built by the Brown Boveri Company...
100 KB (12,167 words) - 00:14, 1 September 2024
Klimov VK-1 (category Centrifugal-flow turbojet engines)
The engine featured a centrifugal compressor, requiring a larger-diameter fuselage than aircraft featuring axial compressor designs that had already...
5 KB (498 words) - 23:12, 27 November 2023
Jet engine (category Gas compressors)
patent showed a two-stage axial compressor feeding a single-sided centrifugal compressor. Practical axial compressors were made possible by ideas from...
61 KB (7,836 words) - 14:35, 9 October 2024
fluids. Centrifugal pumps are also turbomachines that transfer energy from a rotor to a fluid, usually a liquid, while turbines and compressors usually...
20 KB (2,486 words) - 18:52, 30 April 2024
Turbocharger (section Compressor)
turbocharger are: Turbine – usually a radial turbine design Compressor – usually a centrifugal compressor Center housing hub rotating assembly The turbine section...
30 KB (3,202 words) - 07:02, 3 October 2024
1932 - Hermetic Compressor 1951 – Packaged Terminal Air Conditioner (PTAC) 1962 - Packaged R-12 Positive Pressure Centrifugal Compressor Chiller 1971 -...
7 KB (727 words) - 23:47, 15 February 2024
Heinkel HeS 011 (category Centrifugal-flow turbojet engines)
unique compressor arrangement, starting with a low-compression impeller in the intake, followed by a "diagonal" stage similar to a centrifugal compressor, and...
11 KB (1,364 words) - 07:12, 28 April 2024
normal pumping operation this pump works like an ordinary centrifugal pump. Centrifugal compressor Axial flow pump Net positive suction head (NPSH) Pump Seal...
19 KB (2,729 words) - 20:01, 23 May 2024
not as controlled as expected, a side-effect of the axial-centrifugal high-pressure compressor selection, controlling software was adapted to maintain a...
19 KB (1,687 words) - 21:18, 16 June 2024
associated with centrifugal compressors. The impeller can be machined from solid using NC machines, in much the same way as that of a centrifugal design. Diagonal...
2 KB (209 words) - 15:06, 13 February 2023