Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical...

thermodynamics, the heat transfer coefficient or film coefficient, or film effectiveness, is the proportionality constant between the heat flux and the thermodynamic...

heat transfer) is the transfer of heat from one place to another due to the movement of fluid. Although often discussed as a distinct method of heat transfer...

A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes...

fundamental mechanisms of heat transfer, along with conduction and convection. The primary method by which the Sun transfers heat to the Earth is thermal...

heat transfer, a condenser is a heat exchanger used to condense a gaseous substance into a liquid state through cooling. In doing so, the latent heat...

thermodynamics, heat is energy in transfer between a thermodynamic system and its surroundings by modes other than thermodynamic work and transfer of matter...

along the tube field. This increases fluid velocity and the effective heat transfer co-efficient of the exchanger In a static mixer, baffles are used to...

In fluid thermodynamics, a heat transfer fluid is a gas or liquid that takes part in heat transfer by serving as an intermediary in cooling on one side...

Heat transfer enhancement is the process of increasing the effectiveness of heat exchangers. This can be achieved when the heat transfer power of a given...

used in automotive and HVAC applications, in industrial processing heat-transfer fluid is one technical term more often used in high temperature as well...

Heat transfer physics describes the kinetics of energy storage, transport, and energy transformation by principal energy carriers: phonons (lattice vibration...

A heat pump is a device that consumes energy (usually electricity) to transfer heat from a cold heat sink to a hot heat sink. Specifically, the heat pump...

Heat transfer vinyl (HTV) is a speciality polyurethane with a heat-activated adhesive (typically polyester-based) that can be used on certain fabrics and...

more uniform. Every process involving heat transfer takes place by only three methods: Conduction is heat transfer through stationary matter by physical...

transformers. Heat transfer oils are used both as coolants (see oil cooling), for heating (e.g. in oil heaters) and in other applications of heat transfer.[citation...

heat recovery ventilator (HRV) can only transfer sensible heat. HRVs can be considered sensible only devices because they only exchange sensible heat...

a heat transfer caused a volume change in a body while its temperature was constant. In contrast to latent heat, sensible heat is energy transferred as...

Mass transfer is often coupled to additional transport processes, for instance in industrial cooling towers. These towers couple heat transfer to mass...

others. The fundamental analysis in all three subfields of mass, heat, and momentum transfer are often grounded in the simple principle that the total sum...

A heat sink (also commonly spelled heatsink,) is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to...

In fluid dynamics, the general equation of heat transfer is a nonlinear partial differential equation describing specific entropy production in a Newtonian...

convective heat transfer model was developed after computers came into wide use in order to substitute the empirical relation of proportionality of heat flux...

A heat pipe is a heat-transfer device that employs phase transition to transfer heat between two solid interfaces. At the hot interface of a heat pipe...

Heat exchangers were initially developed to use plain (or smooth) heat transfer surfaces. An Enhanced heat transfer surface has a special surface geometry...

as thermal insulation) from the interface area in order to maximize heat transfer and dissipation. Thermal paste is an example of a thermal interface...

be due to gravitational, electromagnetic or fictitious body forces. Heat transfer by natural convection plays a role in the structure of Earth's atmosphere...

flow and multiphase heat transfer. The former occurs only if all parts are at the same temperature, but interphase heat transfer also occurs when the...

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional...

mainly divided into three parts: thermodynamics, fluid mechanics, and heat transfer, but they are often closely linked to each other. A common example is...