Fed Through the Teeth Machine is the fourth studio album by the American band The Red Chord, released October 27, 2009. The album was self-produced by...

chart. Their latest album, 2009's Fed Through the Teeth Machine, debuted at No. 180 on the Billboard 200 chart. The Red Chord has released four studio...

Retrieved 15 August 2009. Freeman, Phil (27 October 2009). "Fed Through the Teeth Machine – The Red Chord | Songs, Reviews, Credits, Awards". AllMusic. Retrieved...

Eyes is the third full-length album by American band, The Red Chord. It is the second album that the band has released on Metal Blade Records. The album...

2009-04-26. The Red Chord: 'Fed Through The Teeth Machine' Artwork, Track Listing Revealed - September 9, 2009 Archived September 13, 2009, at the Wayback...

25 Aug 2009[dead link‍] "The Red Chord Reveals New Album, "Fed Through the Teeth Machine," Details and Posts New Song, "Demoralizer," Online". Metalunderground...

The M240 machine gun, officially the Machine Gun, 7.62 mm, M240, is the U.S. military designation for the FN MAG, a family of belt-fed, gas-operated medium...

Whitechapel, Bleeding Through, Kataklysm, and God Forbid. He’s made over a half dozen records each with Shadows Fall (including the band’s most commercially...

Rooster Teeth Productions, LLC was an American entertainment company headquartered in Austin, Texas. Founded in 2003 by Burnie Burns, Matt Hullum, Geoff...

is a machining process for gear cutting, cutting splines, and cutting sprockets using a hobbing machine, a specialized milling machine. The teeth or splines...

2009. Archived from the original on March 1, 2012. Retrieved November 12, 2019. Harvey, Eric (April 24, 2009). "Immaculate Machine: High on Jackson Hill"...

workpieces are fed into the file. The file teeth are angled so that material is removed on each downstroke of the tool. Chips removed from the workpiece fall...

in the hub of a pulley or gear can be machined without resorting to a dedicated broaching setup. Dovetail slides Internal splines and gear teeth. Keyway...

Reluctance machines have no windings on the rotor, only a ferromagnetic material shaped so that "electromagnets" in stator can "grab" the teeth in rotor...

Britain the definition is still "0 permanent incisor teeth". A permanent incisor tooth is said to be "in wear" if it protrudes further than the nearest...

thousands of rpm. Diameter of the tool (D) Number of teeth (z) Feed per tooth (Fz) This is the distance the material is fed into the cutter as each tooth rotates...

the cotton progresses further on the teeth get finer (i.e. closer together). The cotton leaves the carding machine in the form of a sliver; a large rope...

can come in a variety of sizes and tooth pitches (teeth per inch, or TPI), which enables the machine to be highly versatile and able to cut a wide variety...

These teeth are repeatedly replaced throughout life, with new teeth growing at the rear as older teeth fall out from farther forward in the mouth, somewhat...

fed in. They are pulled between two toothed wheels, usually made of metal. Each wheel spins the opposite direction of the other. The teeth pull the kernels...

gear at the top of the machine's body; that gear engages the accumulator gearing. When one tries to work out the numbers of teeth in such a transmission...

into the skin, nervous system, enamel of the teeth, lining of the intestine, mammary and sweat glands, hoofs, and hair. The mesoderm forms the major...

tagged (reduced in diameter to enable the tube to be initially fed through the die to then be pulled from the other side) using a rotary swager, which...

The Japanese Type 11 light machine gun was the only weapon system that used a hopper magazine. This light machine gun was fed by standard 6.5×50mmSR Arisaka...

accomplished by using a cutter with many teeth, spinning the cutter at high speed, or advancing the material through the cutter slowly; most often it is some...

can be fed into each style block. Those fed to the lower layers control the large-scale styles, and those fed to the higher layers control the fine-detail...

The age of cattle is determined chiefly by examination of the teeth, and less perfectly by the horn rings or the length of the tail brush; due to bang-tailing...

the mother begins to spend more time away from her young, and at around four months, the young emerge from the burrow. A platypus is born with teeth,...

each. The teeth are functional, but do not appear to be necessary for capturing or eating squid, as well-fed animals have been found without teeth or even...

pass through slots cut along the axis of the stator. The spaces between the slots are called teeth. The shape of the slots and teeth depends upon the design...