ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...
70 KB (3,823 words) - 18:48, 26 August 2024
The ISO 9000 family is a set of five quality management systems (QMS) standards by the International Organization for Standardization (ISO) that help organizations...
65 KB (7,165 words) - 20:05, 29 August 2024
Screw (redirect from Grade (fasteners))
"Grade Markings: Carbon Steel Bolts". Retrieved 2009-05-30. "Hardware, bulk — Technical information". Retrieved 2009-05-30. "ASTM, SAE and ISO grade markings...
65 KB (6,091 words) - 09:18, 18 August 2024
allows for up to 0.87 mm of variation in size. The ISO 286 defines the international tolerances grades for nominal sizes up to 3.15 meters as follows: From...
18 KB (731 words) - 21:09, 29 April 2024
Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings It is an ISO standard...
2 KB (281 words) - 00:31, 20 April 2023
Gauge block (section Grades)
Federal Grades 0.5, 1, and 2 and ISO grades K, 00, and 0 no oil or color should be visible under the gauge block. For Federal Grade 3 and ISO grades 1 and...
24 KB (3,121 words) - 14:30, 16 April 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
258 KB (37,454 words) - 15:11, 21 August 2024
The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards...
18 KB (1,611 words) - 04:40, 30 August 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
205 KB (28,951 words) - 15:35, 2 July 2024
ISO 2852 Stainless steel clamp pipe couplings for the food industry was an international standard that defines a non-permanent sanitary food-grade piping...
3 KB (330 words) - 08:33, 6 June 2022
Renard series (redirect from ISO 3)
adopted by the ISO in 1949 to form the ISO Recommendation R3, first published in 1953 or 1954, which evolved into the international standard ISO 3. The factor...
25 KB (1,916 words) - 13:28, 17 August 2024
Construction "ASTM A325 - Portland Bolt". Retrieved 2009-06-13.. ASTM, SAE and ISO grade markings and mechanical properties for steel fasteners, retrieved 2009-06-06...
7 KB (566 words) - 14:07, 24 February 2024
with ISO 3506 (not to be confused with A2 tool steel). The Japanese equivalent grade of this material is SUS304. Type 304L—same as the 304 grade but lower...
25 KB (1,567 words) - 07:07, 9 August 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
67 KB (9,537 words) - 10:07, 2 July 2024
Film speed (redirect from ISO rating)
numerical scales, the most recent being the ISO system introduced in 1974. A closely related system, also known as ISO, is used to describe the relationship...
124 KB (12,150 words) - 16:38, 8 June 2024
profile roughness parameters are included in BS EN ISO 4287:2000 British standard, identical with the ISO 4287:1997 standard. The standard is based on the...
35 KB (3,727 words) - 14:25, 29 August 2024
SAE International as part of its SAE steel grades. It is also known as: 4301-304-00-I and X5CrNi18-9, the ISO 15510 name and designation. UNS S30400 in...
12 KB (1,238 words) - 15:20, 11 September 2024
ISO 3103 is a standard published by the International Organization for Standardization (commonly referred to as ISO), specifying a standardized method...
8 KB (924 words) - 05:29, 11 July 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
58 KB (7,947 words) - 12:28, 15 January 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
113 KB (15,687 words) - 15:34, 2 July 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
52 KB (7,303 words) - 15:21, 26 May 2024
1999-04-21, retrieved 2009-06-06. Grade Markings: Carbon Steel Bolts, retrieved 2009-05-30. ASTM, SAE and ISO grade markings and mechanical properties...
5 KB (329 words) - 02:09, 8 August 2022
Steel-toe boot (redirect from ISO 20345: 2004)
current one is ISO 20345:2011 - previously ISO 20345:2004. The codes applicable to European safety footwear are: There is also Previous EN ISO 20346:2004...
14 KB (1,310 words) - 02:15, 1 September 2024
(SAE). American steel grades : AISI/SAE steel grades standard British Standards International Organization for Standardization ISO/TS 4949:2016 European...
21 KB (957 words) - 09:17, 8 September 2024
2,2,4-Trimethylpentane (redirect from Iso-octane)
2,2,4-Trimethylpentane, also known as isooctane or iso-octane, is an organic compound with the formula (CH3)3CCH2CH(CH3)2. It is one of several isomers...
7 KB (484 words) - 09:14, 24 January 2024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...
74 KB (10,268 words) - 04:40, 29 April 2024
Intermodal container (redirect from ISO Container)
alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names:...
102 KB (10,314 words) - 22:47, 15 September 2024
22331:2018". ISO. "ISO 22380:2018". ISO. "ISO 22381:2018". ISO. "ISO 22382:2018". ISO. 5 December 2018. "ISO 22392:2020". ISO. "ISO 22395:2018". ISO. 30 October...
30 KB (3,687 words) - 17:19, 22 June 2024
NLGI consistency number (redirect from NLGI Grade)
consistency number is also a component of the code specified in standard ISO 6743-9 “lubricants, industrial oils and related products (class L) — classification...
5 KB (499 words) - 16:59, 14 August 2024