In a spark ignition internal combustion engine, ignition timing is the timing, relative to the current piston position and crankshaft angle, of the release...

effect or optical) to control the timing of the ignition coil charging. In older distributors, adjusting the ignition timing is usually achieved through both...

A timing mark is an indicator used for setting the timing of the ignition system of an engine, typically found on the crankshaft pulley (as pictured)...

be prevented by any or all of the following techniques: retarding ignition timing the use of a fuel with high octane rating, which increases the combustion...

the ignition systems of spark-ignition internal combustion engines. The switch is automatically operated by a cam driven by the engine. The timing of operation...

used in distributors for ignition timing (and in some types of crank- and camshaft-position sensors for injection pulse timing, speed sensing, etc.) the...

computer-controlled engines in conjunction with fixed-timing distributors, as the computer controls the ignition timing. HEI distributors are a popular swap on older...

Manufacturer-specification timing belts may stretch at high rpm,[citation needed] retarding the cam and therefore the ignition. Stronger aftermarket belts...

synchronise to an ensemble Color timing, photochemical process of altering and enhancing the color of an image Ignition timing, timing of piston and crankshaft...

compression ignition engines are diesels in which the fuel is mixed with the air after the air has reached ignition temperature. In this case, the timing comes...

both, with adjacent timing marks showing the recommended ignition timing settings as decided during engine development. These timing marks can be used to...

provides direct control. Engines must be designed so that ignition conditions occur at the desired timing. To achieve dynamic operation, the control system must...

Capacitor discharge ignition (CDI) or thyristor ignition is a type of automotive electronic ignition system which is widely used in outboard motors, motorcycles...

ratio, carburetor balance, spark plug and distributor point gaps, and ignition timing were regular maintenance tasks for older engines and are the final...

distributorless ignition system with a coil for each spark plug. This system forgoes the use of a conventional distributor-based ignition timing system in favor...

Ignition systems are used by heat engines to initiate combustion by igniting the fuel-air mixture. In a spark ignition versions of the internal combustion...

An ignition coil is used in the ignition system of a spark-ignition engine to transform the battery voltage to the much higher voltages required to operate...

is an engine management system in the Saab Trionic range. It controls ignition, fuel injection and turbo boost pressure. The system was introduced in...

engine management systems to control the fuel injection or the ignition system timing and other engine parameters. Before electronic crank sensors were...

versatility of Honda's intention for the bike. 1994: Updates to the ignition timing due to adoption of the pent-roof combustion chamber design, the internal...

use spark ignition. High voltage for the spark this may be provided by a magneto or an ignition coil. In modern car engines, the ignition timing is managed...

named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder...

A timing light is a stroboscope used to dynamically set the ignition timing of an Otto cycle or similar internal combustion engine equipped with a distributor...

system, eliminating a distributor in favor of fully electronic ignition timing. The ignition system also uses a coil-on-plug system. In markets that required...

problem) Auto-ignition of engine oil droplets (Can be solved by using an oil catch tank) Insufficient oil in the engine Ignition timing too far advanced...

A carbureted compression ignition model engine, popularly known as a model diesel engine, is a simple compression ignition engine made for model propulsion...

which are automated in modern passenger cars, were the choke valve, ignition timing, and spark arrestor. In the past, all cars had manual controls for...

precision of this drive is now less critical (ignition timing is more critical for engine performance than valve timing): engines continue to run adequately even...

advancing or retarding the ignition timing. A certain amount of skill and experience was required to find the optimal spark timing for any speed and load...

(1,296 cc) Compression ratio: 9.5:1 Ignition timing (with vacuum advancer off): 10 degrees BTDC Ignition timing (as per Haynes Databook): 5 degrees BTDC...