This is a list of named alloys grouped alphabetically by the metal with the highest percentage. Within these headings, the alloys are also grouped alphabetically...

Copper alloys are metal alloys that have copper as their principal component. They have high resistance against corrosion. Of the large number of different...

LaNi2.5Co2.5. List of named alloys Picard, G. S.; Mottot, Y. E.; Tremillon, B. L. Study on electrowinning of solid lanthanum-nickel alloys in lithium chloride-potassium...

casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium...

Hence a wide range of solder alloys exist, and only major ones are listed below. Since early 2000s the use of lead in solder alloys is discouraged by several...

science studies. Alloys are usually classified as substitutional or interstitial alloys, depending on the atomic arrangement that forms the alloy. They can be...

prevalent shape-memory alloys are copper-aluminium-nickel and nickel-titanium (NiTi), but SMAs can also be created by alloying zinc, copper, gold and...

High-entropy alloys (HEAs) are alloys that are formed by mixing equal or relatively large proportions of (usually) five or more elements. Prior to the...

aluminium alloys because of microsegregation, but has significantly better corrosion resistance than the alloys from the 2000 series. It is one of the most...

kinds of weather. Argentium sterling silver Britannia silver Britannia metal Cupronickel Sheffield plate Nickel Directive List of named alloys Principles...

This list of eponymous laws provides links to articles on laws, principles, adages, and other succinct observations or predictions named after a person...

Galinstan is a brand name for an alloy composed of gallium, indium, and tin which melts at −19 °C (−2 °F) and is thus liquid at room temperature. In scientific...

attenuate the color of copper.[citation needed] As a result, white gold alloys can be used for many different purposes. Nickel alloys are hard and strong...

steps. Refractory metals and their alloys can be worked into wire, ingots, rebars, sheets or foil. Molybdenum-based alloys are widely used, because they are...

ZA alloys because of their constant 4% aluminium composition. The name zamak is an acronym of the German names for the metals of which the alloys are...

454 °C. Elgiloy is a trade name for this super alloy. Phynox is another trade name for the same super alloy. List of named alloys "- YouTube". www.youtube...

eutectic alloys. Sometimes the term "fusible alloy" is used to describe alloys with a melting point below 183 °C (361 °F; 456 K). Fusible alloys in this...

Following is a list of minerals that serve as copper ores in the copper mining process: Samans, Carl H. Engineering Metals and their Alloys MacMillan 1949...

Nickel–aluminium alloy may refer to: Y alloy, series of aluminium alloys with addition of nickel developed during WWI; Hiduminium, series of aluminium alloys with...

resistance alloys which are used primarily for resistors operating below 600 °C. While the majority of atoms in these alloys correspond to the ones listed in...

Mistborn: The Alloy of Law is a fantasy novel written by American author Brandon Sanderson. It was published on November 8, 2011, by Tor Books and is the...

5×10−5 K−1 Mechanical Properties Modulus of elasticity: 124–159 GPa Maximum use temperature in air: 300 °C List of named alloys "Manganin 230 Shunt Wire". California...

(also known as NiCr, nickel-chromium or chromium-nickel) is a family of alloys of nickel and chromium (and occasionally iron) commonly used as resistance...

Cu-Mn-Al heusler alloys". Ph.D. Thesis, Imperial College London. Knowlton, A. A; Clifford, O. C (1912). "The Heusler alloys". Transactions of the Faraday Society...

Aluminium–lithium alloys (Al–Li alloys) are a set of alloys of aluminium and lithium, often also including copper and zirconium. Since lithium is the least...

specific proportions, some alloys are eutectic — that is, the alloy's melting point is the lowest possible for a mixture of those components, and coincides...

compounds by element List of alloys List of alkanes List of elements by name List of minerals – List of minerals with Wikipedia articles List of alchemical substances...

of metals. Metal production begins with the processing of ores to extract the metal, and includes the mixture of metals to make alloys. Metal alloys are...

The TC value can also be raised by alloying tungsten with another metal (e.g. 7.9 K for W-Tc). Such tungsten alloys are sometimes used in low-temperature...

production of larger batch sizes was possible. More recently, a number of additional alloys have been added to the Liquidmetal portfolio. These alloys also...