Parallel Redundancy Protocol (PRP) is a network protocol standard for Ethernet that provides seamless failover against failure of any network component...

Media Redundancy Protocol (MRP) is a data network protocol standardized by the International Electrotechnical Commission as IEC 62439-2. It allows rings...

dedicated switches. This is in contrast to the companion standard Parallel Redundancy Protocol (PRP), with which HSR shares the operating principle. PRP and...

automation adopted by IEC 61850 Parallel Redundancy Protocol use of PTP profiles (L2P2P and L3E2E) for industrial automation in parallel networks PTP is being studied...

attached using the IEC 62439-3 protocol (PRP "Parallel Redundancy Protocol" or HSR "High-availability Seamless Redundancy") Several master clocks can be...

longitudinal redundancy check (LRC), or horizontal redundancy check, is a form of redundancy check that is applied independently to each of a parallel group...

is a two-octet field in an Ethernet frame. It is used to indicate which protocol is encapsulated in the payload of the frame and is used at the receiving...

A cyclic redundancy check (CRC) is an error-detecting code commonly used in digital networks and storage devices to detect accidental changes to digital...

period, a period between processing multiple stimuli Parallel Redundancy Protocol, a network protocol providing fault tolerance Petroleum Remediation Product...

etc.) communications protocols, communications hardware, communications networks, communications paths Geographic redundancy corrects the vulnerabilities...

configuration feature which would add in redundancy as well. This became known as Link Aggregation Control Protocol (LACP). As of 2000[update], most gigabit...

attached using the IEC 62439-3 protocol (PRP "Parallel Redundancy Protocol" or HSR "High-availability Seamless Redundancy"). Several master clocks can be...

external CF be used in a parallel sysplex. It is recommended that a Parallel Sysplex has at least two CFs and/or ICFs for redundancy, especially in a production...

are error checked by a cyclic redundancy check. The first two formal SCSI standards, SCSI-1 and SCSI-2, described parallel SCSI. The SCSI-3 standard then...

system Fieldbus Human-machine interface Media Redundancy Protocol Modbus Parallel Redundancy Protocol Process control Programmable logic controller SCADA...

distributed by the Fieldbus Foundation of Austin, Texas. Parallel Redundancy Protocol Media Redundancy Protocol IEC 61158-1:2019 Industrial communication networks...

Control Transmission Protocol (SCTP) is a computer networking communications protocol in the transport layer of the Internet protocol suite. Originally intended...

components in parallel, you can achieve 99.9023% availability. Two kinds of redundancy are passive redundancy and active redundancy. Passive redundancy is used...

implicit redundancy of the delivered information. It is useful to distinguish two prevailing styles of gossip protocol: Dissemination protocols (or rumor-mongering...

location-independent addressing and redundancy which improve reliability or reduce the complexity of the other parts of the cluster. Parallel file systems are a type...

Border Gateway Protocol (BGP) is a standardized exterior gateway protocol designed to exchange routing and reachability information among autonomous systems...

The Transmission Control Protocol (TCP) is one of the main protocols of the Internet protocol suite. It originated in the initial network implementation...

state in MESIF addresses this redundancy. Coherence protocol MSI protocol, the basic protocol from which the MESI protocol is derived. Write-once (cache...

Computation of a cyclic redundancy check is derived from the mathematics of polynomial division, modulo two. In practice, it resembles long division of...

serial protocol that moves data to and from computer-storage devices such as hard disk drives and tape drives. SAS replaces the older Parallel SCSI (Parallel...

single signal, a longitudinal redundancy check. In a parallel bus, there is one longitudinal redundancy check bit per parallel signal. Parity was also used...

Explicitly parallel instruction computing Simultaneous multithreading Dependability Active redundancy Dual modular redundancy Triple modular redundancy High-availability...

allowing a Transmission Control Protocol (TCP) connection to use multiple paths to maximize throughput and increase redundancy. In January 2013, the IETF published...

Sets-3 Mapping Protocol for Fibre Channel (FC) protocol. It is a FC layer 4 protocol used to map both IBM's antecedent (either ESCON or parallel Bus and Tag)...

2016-03-03. Detailed explanation of UPS redundancy options"High-Availability Power Systems, Part II: Redundancy Options" (PDF). Archived from the original...