A photopolymer or light-activated resin is a polymer that changes its properties when exposed to light, often in the ultraviolet or visible region of the...

create raised surface printing plates from a negative and a photopolymer plate. Photopolymer plates are light sensitive. On one side the surface is cured...

surface of a vat filled with a liquid photopolymer. The beam is focused onto the surface of the liquid photopolymer, creating each layer of the desired...

be carved from a potato or other semi-rigid food item. Furthermore, photopolymer stamps are gaining popularity. They are most often produced in a set...

using photopolymer plates. After engraving, the photopolymer is exposed through the imaged black layer and washed out in the traditional photopolymer process...

bonds in acrylates. Polymerization occurs when photopolymers are exposed to light when photopolymers contain chromophores, otherwise, the addition of...

Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered...

of poly(phthalaldehyde)". Journal of Photopolymer Science and Technology. 6 (4): 491. doi:10.2494/photopolymer.6.491. B. Zoecklein, K. Fugelsang, B....

process can differ depending on whether solid sheets of photopolymer or liquid photopolymer are used, but the principle is still the same. The plate...

Computer-to-plate (CTP) is an imaging technology used in modern printing processes. In this technology, an image created in a desktop publishing (DTP)...

technique that can store information at high density inside crystals or photopolymers. The ability to store large amounts of information in some kind of medium...

ultraviolet light is focused onto the surface of a vat filled with liquid photopolymer. The light beam, moving under computer control, draws each layer of the...

radiation (UV or visible). Synthetic photoinitiators are key components in photopolymers (for example, photo-curable coatings, adhesives and dental restoratives)...

substrate. There are two main types of printing plate materials: photopolymer and steel. Photopolymer plates are the most popular, as they are easy to use. These...

it is also used in adhesives, sealants, alkyd coatings, elastomers, photopolymers, and inks for improved adhesion, hardness, abrasion and heat resistance...

adhesives, photopolymer resins, custom printer ink cartridges, Gas pipe sealants, and soak off nail polishes. Chemence is a supplier of photopolymer and commercial...

so-called voxel. Voxels are thus the smallest, single volumes of cured photopolymer. They represent the basic building blocks of 3D-printed objects. Other...

density, high strain recovery, biocompatibility, and biodegradability. Photopolymers or light activated polymers (LAP) are another type of SMP that are activated...

bath and is gradually etched in baths which are increasingly acidic. Photopolymer plates, usually used for relief and letterpress printing, can be used...

system spray photopolymer materials onto a build tray in ultra-thin layers (between 16 and 30 μm) until the part is completed. Each photopolymer layer is...

Light is projected onto the plate as a negative image to expose it. Photopolymer plates are either washed in hot water or under other chemicals according...

materials, depending on the needs of the printing method, usually Thermal, Photopolymer or Silver-Halogen (violet) plates are used. They usually have a processing...

Wienheim. doi:10.1002/14356007.a15_077 Nakamura, Kenichiro (2015). Photopolymers : photoresist materials, processes, and applications. Boca Raton, FL...

Holographic data storage stores information optically inside crystals or photopolymers. Holographic storage can utilize the whole volume of the storage medium...

translucent or opalescent diffusion. Recently, photopolymers have been used for making holographic diffusers. Photopolymers offer better performance than other materials...

entire body panels of cars. Advances in 3D printing technology, using photopolymers that do not melt during the injection moulding of some lower-temperature...

the film is taken to the plate maker, where the film is laid on top of photopolymer plate material. A vacuum is then drawn to ensure tight contact between...

monomer, monomeric, octamer, oligomer, oligomeric, pentamer, pentamerous, photopolymer, phytomer, polymer, tautomerism, telomer, telomere, tetramer, tetrameric...

Desktop Metal purchased EnvisionTEC, a German company that specializes in photopolymer printing. On March 15, Desktop Metal announced its new line Desktop Health...

newspapers. Dry offset printing A printing process which uses a metal backed photopolymer relief plate, similar to a letterpress plate, but, unlike letterpress...