In mechanics and materials science, strain rate is the time derivative of strain of a material. Strain rate has dimension of inverse time and SI units...
8 KB (1,226 words) - 22:26, 9 July 2024
continuum mechanics, the strain-rate tensor or rate-of-strain tensor is a physical quantity that describes the rate of change of the strain (i.e., the relative...
17 KB (2,378 words) - 21:11, 26 March 2024
Strain rate imaging is a method in echocardiography (medical ultrasound) for measuring regional or global deformation of the myocardium (heart muscle)...
25 KB (3,328 words) - 19:53, 18 June 2024
science, shear rate is the rate at which a progressive shear strain is applied to some material, causing shearing to the material. Shear rate is a measure...
4 KB (528 words) - 14:36, 28 September 2024
branch block. Strain rate imaging measures either regional systolic deformation (strain) or the rate of regional deformation (strain rate). The methods...
32 KB (3,989 words) - 13:06, 24 September 2024
Plasticity (physics) (redirect from Elastic and plastic strain)
function of temperature. In the low temperature region 1 (T ≤ 0.25Tm), the strain rate must be high to achieve high τCRSS which is required to initiate dislocation...
29 KB (3,523 words) - 23:29, 27 September 2024
Viscoplasticity (redirect from Rate-dependent plasticity)
of rate-independent plastic material. Nevertheless, three essential differences can be observed. At the same strain, the higher the rate of strain the...
47 KB (6,919 words) - 17:18, 28 August 2024
fluids whose strain rate is a function of time. Fluids that require a gradually increasing shear stress to maintain a constant strain rate are referred...
16 KB (1,497 words) - 13:38, 27 September 2024
Deformation (engineering) (redirect from Engineering strain)
for relating strain, strain rate and stress. 3) Based on the true stress-strain curve and its derivative form, we can estimate the strain necessary to...
22 KB (3,097 words) - 14:59, 19 August 2024
In mechanics, strain is defined as relative deformation, compared to a reference position configuration. Different equivalent choices may be made for the...
17 KB (2,760 words) - 00:06, 19 July 2024
latter case, it has a slightly different meaning relating stress and rate of strain. The model is usually applied to the case of small deformations. For...
8 KB (1,274 words) - 07:28, 17 August 2024
Speckle tracking echocardiography (section Strain)
the distance between two kernels into strain (deformation). Strain rate will then be time derivative of strain. In some commercial applications, the acoustic...
16 KB (1,991 words) - 22:33, 29 July 2024
or as a given value (i.e. for a dashpot). Depending on the change of strain rate versus stress inside a material, the viscosity can be categorized as...
45 KB (5,952 words) - 14:09, 11 September 2024
the distinct deformations under chewing can be affected by shear rate, shear strain, and shear stress applied through teeth. Based on these, it is helpful...
10 KB (1,115 words) - 17:40, 19 September 2024
Viscous stress tensor (section The strain rate tensor)
stress at a point within some material that can be attributed to the strain rate, the rate at which it is deforming around that point. The viscous stress tensor...
17 KB (2,567 words) - 10:12, 3 May 2023
Portevin–Le Chatelier effect (section Strain rate)
The critical strain is both temperature and strain rate dependent. The existence of a critical strain is attributed to better solute diffusivity due...
14 KB (1,738 words) - 08:11, 17 June 2023
Slow strain rate testing (SSRT), also called constant extension rate tensile testing (CERT), is a popular test used by research scientists to study stress...
5 KB (570 words) - 21:42, 1 February 2024
several material parameters that must be found through extensive testing. Strain-rate partitioning is a phenomenological model of thermo-mechanical fatigue...
9 KB (1,689 words) - 21:18, 8 September 2024
are designed in the form of a relation between a stress-rate and a strain-rate (or the rate of deformation tensor). The mechanical response of a material...
37 KB (4,359 words) - 09:13, 22 August 2023
therefore strain rate is constant. Equations that yield a strain rate refer to the steady-state strain rate. Stress dependence of this rate depends on...
65 KB (8,848 words) - 01:45, 21 September 2024
EarthScope (section Global Strain Rate Map)
understanding of strain phenomena; and (3) archive existing methods for modeling strain rates and strain transients. A completed global strain rate map provided...
35 KB (4,541 words) - 18:56, 5 September 2024
correlated to the local strain rate — the rate of change of its deformation over time. Stresses are proportional to the rate of change of the fluid's...
21 KB (3,040 words) - 20:02, 26 September 2024
engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying...
11 KB (1,422 words) - 06:37, 25 September 2024
external stress at high homologous temperature (above ~0.4) and low strain rate and is intertwined with creep. Homologous temperature describes the operating...
22 KB (2,860 words) - 09:11, 9 February 2024
the strain rate. Only a small group of fluids exhibit such constant viscosity. The large class of fluids whose viscosity changes with the strain rate (the...
35 KB (4,171 words) - 23:54, 20 July 2024
Nanoindentation (section Strain-rate sensitivity)
in the stress rate field σ ˙ {\displaystyle {\dot {\sigma }}} kl at tc, there will not be any corresponding change in the strain rate field ϵ ˙ {\displaystyle...
44 KB (6,262 words) - 21:26, 29 June 2024
increase the strain rate in superplastic deformation to the order of 10−2 s−1, called High strain Rate Superplasticity (HSRS). Increment of strain rate in superplastic...
35 KB (5,237 words) - 12:41, 12 February 2024
where stress is proportional to strain in small deformations. Such response to stress is independent of strain rate. The classical theory of hydrodynamics...
20 KB (2,803 words) - 18:30, 26 August 2024
creep during subsequent testing. • Strain rate consistently increased with strain during tests, and the rate of strain rate increase with stress was higher...
16 KB (2,667 words) - 12:25, 4 April 2024
FCC. However, the relationship between the CRSS and temperature and strain rate is worth examining further. To understand the relationship between stress...
11 KB (1,603 words) - 14:57, 26 January 2023