The caster angle or castor angle is the angular displacement of the steering axis from the vertical axis of a steered wheel in a car, motorcycle, bicycle...

The angle of, and distance between the wheel axles and swivel joint can be adjusted for different types of caster performance. Industrial casters are...

force of turning and negative camber will improve handling overall. Caster angle will also compensate for this to a degree, as the top of the outside...

usually tapered roller bearings. The steering axis angle, also called caster angle, is the angle that the head tube and hence the steering axis makes...

A caster is a type of wheel. Caster may also refer to: Caster angle, one of the angles important to automotive suspension Caster, a machine used in metal...

Caster angle θ indicates kingpin pivot line and gray area indicates vehicle's tire with the wheel moving from right to left. A positive caster angle aids...

wheelies and stoppies. The steering axis angle is called caster angle when measured from vertical axis or head angle when measured from horizontal axis. The...

throughout suspension travel, controlling such parameters as camber angle, caster angle, toe pattern, roll center height, scrub radius, scuff (mechanical...

03 s) Type: TRW rack and pinion, 3.3 turns lock-to-lock, unassisted Caster angle: 5.5 to 5.7 degrees Turning circle: 41 ft (12 m) Wheels: magnesium alloy...

is usually adjustable in production automobiles, even though caster angle and camber angle are often not adjustable. Maintenance of front-end alignment...

tank capacity: 16 L Engine oil capacity: 1200 cc 2-stroke oil injection Caster angle: 24 degrees Brakes Front: 2POT dia280 mm × 2 disc, 2 pot calipers Brakes...

\,\!} is the lean angle, δ {\displaystyle \delta \,\!} is the steering angle, and ϕ {\displaystyle \phi \,\!} is the caster angle of the steering axis...

chassis. These include: Ackermann steering geometry Axle track Camber angle Caster angle Ride height Roll center Scrub radius Steering ratio Toe Wheel alignment...

shorter wheelbase by 5 mm, Tokico radial brake calipers, different caster angle, sportier suspension setup with dual bending valve two-piece Showa 43 mm...

unit, which is still in aluminum, but with fewer parts and welds. The caster angle is narrower, from 24,3° (on the previous model) to 24,1°. The old tubular...

is given by: (trail + pneumatic trail) · cos(caster angle) · Fy Even if the slip angle and camber angle are zero, and the road is flat, this torque will...

tyres offset control arm bushings in the front suspension, for increased caster angle front aluminium control arms introduced in 1989 revised front strut tubes...

axle Toe angle Torsion bar Trailing arm Unsprung mass Watt's linkage Wheel alignment Wheelbase Steering Ackermann steering geometry Caster angle Kingpin...

receiver Rake (geology), the angle between a feature on a bedding plane and the strike line in geology Rake, the caster angle of a bicycle or motorcycle...

the rear using a mono-shock design. The early models of bikes have a caster angle 25°00, but it was changed to 24°50 in 1995. It is important to note the...

slip angle is zero and decreases as slip angle increases. Pneumatic trail increases with vertical load. Bike physics Camber thrust Caster angle Cornering...

32.1 in (815 mm) Wheelbase 57.1 in (1,450 mm) 57.5 in (1,460 mm) Rake/Caster Angle 26.0 ° 25.0 ° Trail 4.09 in (104 mm) 4.3 in (109 mm) Fuel Capacity 21 L...

throughout suspension travel, controlling such parameters as camber angle, caster angle, toe pattern, roll center height, scrub radius, scuff[clarification...

engine and tyres. The only adjustable areas on the cars are: camber angle, caster angle, ride height, tyre pressure, spring rates, wheelbase, and gearing...

changes include some minor tweaks to the suspension like a different caster angle at the front (it is now 26°), and a shorter swingarm travel at the rear...

front and rear (with no caster on the rear, typically not being steered wheels). In summary, the parameters are: Front: Caster (left & right) Front: Camber...

Ackermann angle, amount of bump steer, caster angle, and kinematics as to maximize front grip and eliminate mechanical bind at steering angles in excess...

shaker – a test rig for high-speed vehicles Ackermann steering geometry Caster angle – self centering steering Coilover Corvette leaf spring - independent...

ones used on the Japan-spec revision A and B non-Spec C STis. The high caster angle has been reduced, which in turn reduces the wheelbase from 100" to 99...

drive Transmission type Constant mesh 6-speed Frame type Double cradle Caster angle 27° Trail 128 mm (5.04 in) Tire size (front) 110/90-16-59H Tire size...