Cooling load is the rate at which sensible and latent heat must be removed from the space to maintain a constant space dry-bulb air temperature and humidity...

estimating the cooling load or heating load of a building. It was introduced in the 1979 ASHRAE handbook. The CLTD/CLF/SCL (cooling load temperature difference/cooling...

index UFAD cooling load ratio (UCLR), which is defined by the ratio of the peak cooling load calculated for UFAD to the peak cooling load calculated for...

presence of the raised floor affects the zone cooling load profile and tends to increase the peak cooling load. When carpeting is present the negative impact...

percentage of the total cooling load that can be attributed to the sensible load. Defined to be sensible cooling load divided by the total load, expressed as a...

energy storage projects Smart grid Vehicle-to-grid Turbine inlet air cooling Load following power plant Renewable and Efficient Electric Power Systems...

evaporative cooling can still take advantage of the evaporative cooling process without increasing humidity. Passive evaporative cooling strategies can...

cooling loads. Due to the microclimate created at the upper floors with the increased wind speed and the decreased dry bulb temperatures, the cooling...

District cooling is the cooling equivalent of district heating. Working on broadly similar principles to district heating, district cooling delivers chilled...

forced air or water cooling system. The device usually also includes instruments for metering, load control, and overload protection. Load banks can either...

controls. Energy savings in DOAS/radiant ceiling cooling panel system can by linked to: cooling coil load reduction, chiller energy reduction, pumping energy...

Ventilative cooling is the use of natural or mechanical ventilation to cool indoor spaces. The use of outside air reduces the cooling load and the energy...

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream, to a lower temperature...

or "solar-powered air conditioning", refers to any air conditioning (cooling) system that uses solar power. This can be done through passive solar design...

is most common for engine and transmission cooling and top airflow most common for air conditioner cooling. Automobile radiators are constructed of a...

system is operating. A cooling anticipator generates a small amount of additional heat to the sensing element while the cooling appliance is not operating...

battery. It can be used either for heating or for cooling, although in practice the main application is cooling.[citation needed] It can also be used as a temperature...

Load is the sixth studio album by American heavy metal band Metallica, released on June 4, 1996, by Elektra Records in the United States and by Vertigo...

radiative cooling (PDRC) (also passive radiative cooling, daytime passive radiative cooling, radiative sky cooling, photonic radiative cooling, and terrestrial...

traditional cooling tower.[citation needed] Electric companies often prefer to use cooling water from the ocean or a lake, river, or cooling pond instead...

of greenhouse gas emissions. Cool roofs achieve cooling energy savings in hot summers but can increase heating energy load during cold winters. Therefore...

plants, the heating and cooling loads of buildings, climate modeling and weather forecasting, passive daytime radiative cooling applications, and space...

by actively exhausting hot air. There are also other cooling techniques, such as liquid cooling. All modern day processors are designed to cut out or...

engine cooling uses either air or liquid to remove the waste heat from an internal combustion engine. For small or special purpose engines, cooling using...

Common methods of energy-efficient landscaping include reducing heat or cooling load of a building through shade, wind-blocking, and insulation; management...

temperature of the gas in the low temperature side. Therefore, for the same cooling load, gas refrigeration cycle machines require a larger mass flow rate, which...

heating and cooling. Transmission temperatures in the range of approx. 10 to 25 °C are common, allowing different consumers to heat and cool simultaneously...

and cooling. The most common blanching methods for vegetables/fruits are hot water and steam, while cooling is either done using cold water or cool air...

such as solar heat, winter's cold, the cooling potential in some places of lakes or seawater for free cooling, and the enabling function of seasonal thermal...

must be used to operate the cooling mechanism, far more than active liquid cooling. The additional components of the cooling mechanism also add weight to...