Ductile iron, also known as ductile cast iron, nodular cast iron, spheroidal graphite iron, spheroidal graphite cast iron and SG iron, is a type of graphite-rich...

Ductile iron pipe is pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development...

purity pig iron is used to dilute any elements in a ductile iron charge which may be harmful to the ductile iron process (except carbon). Pig iron was historically...

Austempered Ductile Iron (ADI) is a form of ductile iron that enjoys high strength and ductility as a result of its microstructure controlled through heat...

and 20th centuries. In many modern applications, cast iron pipe has been replaced by ductile iron pipe, but this newer product is still often loosely referred...

July 6, 1992) was an American metallurgical engineer and inventor of ductile iron. Keith Millis grew up in Rensselaer, New York and earned his Bachelor...

to its lower silicon content. The ductile to brittle transition temperature is lower than many other ductile iron alloys. In order to properly form the...

grey cast iron has graphite flakes which deflect a passing crack and initiate countless new cracks as the material breaks, and ductile cast iron has spherical...

Ductility refers to the ability of a material to sustain significant plastic deformation before fracture. Plastic deformation is the permanent distortion...

Cement-mortar lined ductile iron pipe is a ductile iron pipe with cement lining on the inside surface, and is commonly used for water distribution. Cement-mortar...

American Cast Iron Pipe Company is a manufacturer of ductile iron pipe, spiral-welded steel pipe, fire hydrants, and valves for the waterworks industry...

similarly soft and ductile but can dissolve considerably more carbon (as much as 2.03% by mass at 1,146 °C (2,095 °F)). This gamma form of iron is present in...

company based in Kolkata. It is one of the largest manufacturers of ductile iron pipes in the Indian sub-continent, having a production capacity of 280...

It is also used in NASCAR engine blocks. Malleable iron Ductile iron Vermicular Graphite Cast Iron, archived from the original on 2011-10-06, retrieved...

casting. Gray iron is generally considered easy to weld. Compared to the more modern iron alloys, gray iron has a low tensile strength and ductility; therefore...

ventures include the manufacture of transformers, raw steel production, ductile iron pipe production, the manufacture of battery-powered vehicles, renewable...

visible when it is etched, rusted, or bent to failure. Wrought iron is tough, malleable, ductile, corrosion resistant, and easily forge welded, but is more...

physical and sometimes chemical properties of a material to increase its ductility and reduce its hardness, making it more workable. It involves heating...

treatment that is applied to ferrous metals, most notably steel and ductile iron. In steel it produces a bainite microstructure whereas in cast irons...

Items that were likely made of iron by Egyptians date from 3000 to 2500 BC. Meteoritic iron is comparably soft and ductile and easily cold forged but may...

Rust is an iron oxide, a usually reddish-brown oxide formed by the reaction of iron and oxygen in the catalytic presence of water or air moisture. Rust...

(CRES), and rustless steel, is an alloy of iron that is resistant to rusting and corrosion. It contains iron with chromium and other elements such as molybdenum...

become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability...

alloyed metal is one of the most prominent process.[citation needed] Ductile iron pipes are generally manufactured in such a fashion. Seamless pipe (SMLS)...

Iron pipe may refer to: Cast iron pipe Ductile iron pipe This disambiguation page lists articles associated with the title Iron pipe. If an internal link...

figures of long phases of nickel–iron, found in the octahedrite shapes of iron meteorite crystals and some pallasites. Iron meteorites are very often formed...

the malleability and ductility of the meteoric iron, before the development of smelting that signaled the beginning of the Iron Age. Although they are...

principal stress. In general: ductile materials (e.g. aluminum) fail in shear, whereas brittle materials (e.g. cast iron) fail in tension . To calculate:...

inside diameters under IPS were roughly the same as the more modern Ductile Iron Pipe Standard (DIPS) and Nominal Pipe Size (NPS) Standards, and some...

standards. Gate valves are typically constructed from cast iron, cast carbon steel, ductile iron, gunmetal, stainless steel, alloy steels, and forged steels...