Spray-Up also known as chop method of creating fiberglass objects by spraying short strands of glass out of a pneumatic gun. This method is used often...

significantly reduce the strength of the finished mold. The fiberglass spray lay-up process is also used to produce molds, and can provide good filling...

bubbles and press the fiberglass to the shape of the mold. The fiberglass spray lay-up process is similar to the hand lay-up process but differs in the application...

FRP Chemical Equipments are manufactured mainly by Hand Lay-up and filament winding processes. BS4994 still remains a key standard for this class of items...

surface. The process for building a deck in fiberglass is the same as for building a hull: a female mould is built, a layer of gel coat is sprayed in, then...

large-format moldings and provides fiberglass processes, such as compression molding process (SMC, GMT), spray-up, hand lay-up, resin transfer molding (RTM)...

cost and processing. Costs and labour increase because conventional processing techniques used to fabricate composites, such as wet hand lay-up, autoclave...

Generally rated to 105 °C. FR-4, a woven fiberglass cloth impregnated with an epoxy resin. Low water absorption (up to about 0.15%), good insulation properties...

metal ducts are typically lined with faced fiberglass blankets (duct liner) or wrapped externally with fiberglass blankets (duct wrap). When necessary, a...

insulators for the wires, so a flexible insulating material such as plastic or fiberglass will be needed. A notable output of space manufacturing is expected to...

placement (automated fibre placement), fibreglass spray lay-up process, filament winding, lanxide process, tailored fibre placement, tufting, and z-pinning...

formation factor log FFM – full field model FG – fiberglass FGHT – flood gauge hydrotest FRP – fiberglass reinforced plastics FGEOL – final geological report...

crashing or being blown up. The design was sculpted in a dense foam from which rubber molds were made to form the final epoxy and fiberglass models. The models...

nozzle of branch pipe rotates. If we rotate it to one side, it creates a spray of water; and at the end of rotation, it gives a water curtain to protect...

vertical/horizontal alignment, finished, then allowed to partially dry. In a process similar to laying concrete, the wall is then rendered to a slightly higher level...

plasterers use a hose with a special nozzle with a fine mist spray to dampen walls when rubbing up (using a wood float to bring a consistent finish). Using...

planks, often covered with a vinyl lining, or in thin PVC or now even in fiberglass planks. deckhouse A cabin that protrudes above a ship's deck. decks awash...

molded latex. The new suit is made of 200 individual pieces of rubber, fiberglass, and nylon and metallic mesh. The urethane also served as a light armor...

and casts and scaled them up as diagrams for the wood and fiberglass forms of the sets. Tons of sand, plaster, fiberglass, rock, and gravel were shipped...

provide ventilation as otherwise the weapons could heat up to 750 °F (399 °C) and melt the fiberglass shells. Finally 19 to 20 inch barrel extensions were...

required to obtain most materials that cannot be grown through agricultural processes, or feasibly created artificially in a laboratory or factory. Ores recovered...

with colorful paints, cans of spray paint, and sometimes tomato. Also, she might suspend bags of paint or cans of spray paint in front of the white-painted...

fiberglass were used when the scene called for a killing blow. Designed by Allder, these swords could also retract their blades, and several sprayed blood...

now revamped for the residential market - is sprayed into the walls. Custom cabinetmaker Jeff Peavy lays out the design and material choices for the kitchen...

(and later immortalized as the fiberglass dancing girl figures on a bench outside the saloon.) A wide stairway led up to the interior and outside balconies...

(3.0 m). It took 14 months and $150,000 to build. Instead of standard fiberglass used for older models, the new Enterprise was constructed with lightweight...

Stars Volume 3", even though it is listed as Season 3. Note: The episodes up to and including "Chummobile" are included in Volume 3 on iTunes, with the...

recycling blades is related to the composite material, which is made of fiberglass with carbon fibers in epoxy resin, which cannot be remolded to form new...

master carpenter follows the spray-in urethane insulation process - from mixing the two-part formula on a truck to spraying it into stud bays, where the...

boundaries, features and historical significance. From the 1970s to 1994, a fiberglass model of a triceratops named Uncle Beazley stood on the Mall in front...