Nickel aluminide refers to either of two widely used intermetallic compounds, Ni3Al or NiAl, but the term is sometimes used to refer to any nickel–aluminium...

aluminides, including Fe3Al and FeAl Nickel aluminide, Ni3Al See category for a list. "Definition of ALUMINIDE". www.merriam-webster.com. Retrieved 2023-10-14...

enantioselective Raney nickel has been devised by surface adsorption of tartaric acid. Nickel aluminide Urushibara nickel Rieke nickel Nickel boride catalyst...

aluminium alloys with addition of nickel developed before WWII; Nickel aluminide, alloys containing much more nickel than the previous ones. This article...

Nickel compounds are chemical compounds containing the element nickel which is a member of the group 10 of the periodic table. Most compounds in the group...

in nickel metal hydride batteries. Ni3Al, which is the hardening phase in the familiar nickel-base super alloys, and the various titanium aluminides have...

and is environmentally safe. Development of novel, platinum-modified nickel-aluminide coatings that delivered unprecedented oxidation and phase stability...

types of bond coats are: the aluminides, the platinum-aluminides, MCrAlY, cobalt-cermets, and nickel-chromium. For aluminide bond coatings, the coating's...

Y alloy is a nickel-containing aluminium alloy. It was developed by the British National Physical Laboratory during World War I, in an attempt to find...

abrasion blasted and/or machined a thin layer of molybdenum, nickel-chromium alloys or nickel aluminide can be spayed before the final detonation spray coating...

niobium, Al 2024, bulk metallic glass, stainless steel, and titanium aluminide. Currently commercial materials for EBM include commercially pure Titanium...

aluminium and bulk nickel. The layers are deposited by sequential sputtering of alternately nickel and aluminium. Nickel aluminide will ignite on heating...

formation of phases that are actually desired (especially Al2Cu, copper aluminide). Larger amounts of silicon are alloyed to form with magnesium Mg2Si (magnesium...

properties of cemented carbide can be improved by replacing cobalt with iron aluminide. Tungsten carbide cutting tools can be further enhanced with coatings...

Chemical formula Synonyms CAS number TaAl3 tantalum(III) aluminide 12004–76–1 TaBr3 tantalum(III) bromide 13842–73–4 TaBr4 tantalum(IV) bromide 13842–76–7...

as temperatures increased. The first TBCs, applied in the 1970s, were aluminide coatings. Improved ceramic coatings became available in the 1980s. These...

(1989). "Metastable Microstructure in Dynamically Consolidated γ Titanium Aluminide". Scripta Metallurgica. 23 (10): 1791–1794. doi:10.1016/0036-9748(89)90362-1...

low-pressure turbine airfoils made of titanium aluminide (TiAl) are stronger, lighter, and more durable than nickel-based parts. 3D printing is used to manufacture...

cavities in hard and exotic metals, such as titanium aluminides, Inconel, Waspaloy, and high nickel, cobalt, and rhenium alloys. Both external and internal...

low-speed fan rig tests and the casting of second-generation titanium aluminide IP turbine blades, the initial UltraFan demonstrator concept design was...

coating systems and fabriction processes for titanium alloys and titanium aluminides (amended) Coating Materials for Electronic Applications: Polymers, Processes...

NiCrAlY or NiCoCrAlY alloy, though other bond coats made of Ni and Pt aluminides also exist. The primary purpose of the bond coat is to protect the metal...

applications, his research group focused on studying nickel-based superalloys and titanium aluminides used in the GE90 engine for their resistance to high-temperature...

tetramethylammonium [N(CH3)4]+ Other building blocks: stannide alloys [Sn], aluminide alloys [Al], aluminosilicates, borosilicates, aluminoborosilicates, paddlewheel...

alloys. However, superplastic behaviour was found in large-grained iron aluminides without the usual requisites for superplasticity of a fine grain size...

transformations. Order-disorder transitions such as in alpha-titanium aluminides. As with states of matter, there are also a metastable to equilibrium...

oxidation/corrosion resistant coatings (bond coats) typically consist of aluminides or MCrAlY (where M is typically Fe and/or Cr) alloys. Using TBCs limits...

Cupalite (alloy: IMA1983-084) 1.AA.20 [1,095] [1,096] [1,097] (IUPAC: copper aluminide) Cuprite (Y: 1845) 4.AA.10 [1,098] [1,099] [1,100] (IUPAC: dicopper(I)...