A surfboard fin or skeg is a hydrofoil mounted at the tail of a surfboard or similar board to improve directional stability and control through foot-steering...

more fins (skegs) on the bottom rear of the board to improve directional stability, and numerous improvements in materials and shape. Modern surfboards are...

underwater diver Surfboard fins provide surfers with means to maneuver and control their boards. Contemporary surfboards often have a centre fin and two cambered...

Surfboard wax (also known as surfwax) is a formulation of natural and/or synthetic wax for application to the deck of a surfboard, bodyboard, or skimboard...

known during the 1960s and 1970s for his work in film, and in surfboard design, fin characteristics, and other creations for the aquatic medium. The...

Look up Fin, fin, fín, FIN, Fín, Fin., fiń., Fins, or fins in Wiktionary, the free dictionary. A fin is an appendage used to produce lift and thrust or...

Hawaii. His mother is Filipino, while his father is American and a surfboard fin maker. Mock was homeschooled. Growing up, he aspired to be a professional...

Surfboard fin The surfboard fin, or keel, is the part of the back of a surfboard that enters the water. Similar to a rudder on a boat the surfboard fin...

Nubster", a fifth surfboard fin. Mattison is also the designer of his own alternative high performance surfboards and surfboard fins named Von-Sol. In...

A surfboard shaper is someone who designs and builds surfboards. The process of surfboard shaping has evolved over the years, and the shaper often tailors...

attached to a surfboard. The FCS style can be used as the traditional tri-fin placement (thruster), a two fin (twin), a four fin (quad), or a five fin set up...

in single unit to propel the ROV, AUV or UUV Thruster (surfing) is a surfboard fin design Shkadov thruster, hypothetical megascale reaction for moving...

heavy redwood surfboards in the 1940s and 1950s. At age 19, Clark worked for Tom Blake, a legendary figure who invented the surfboard fin. To help pay...

Special epoxy is strong enough to withstand the forces between a surfboard fin and the fin mount. This epoxy is waterproof and capable of curing underwater...

his signature 32 snowboarding boot and signature model surfboard fin designs with Captain Fin and FCS. For the 2010 film Grey Whale Sessions, Chris joins...

years, the name has been used for a fin on a surfboard which improves directional stability and to a movable fin on a kayak which adjusts the boat's centre...

early 1950s, after the surfboard fin had grown big enough to really anchor the tail." According to most surfing historians, the fin was invented by Tom Blake...

Australian competitive surfer, surfboard shaper, and writer. He is credited with the 1980 invention of a three-fin surfboard design, called the "thruster"...

in the hottest or best part of the wave Fins-free snap (or "fins out"): A sharp turn where the surfboard's fins slide off the top of the wave[f] Floater:...

A tunnel fin is a type of surfboard fin used on surfboards, especially heavy longboards and longboard guns. The weight and length of these boards make...

length, are reminiscent of the earliest surfboards, but now benefit from modern innovations in surfboard shaping and fin design. Competitive longboard surfers...

NACA airfoil Propeller Sail (aerodynamics) Skeg Spoiler (automotive) Surfboard fin Wing "...the effect of the wing is to give the air stream a downward...

descriptions of redirect targets Supersonic flow over a flat plate Surfboard fin – part of a surfboardPages displaying wikidata descriptions as a fallback Surface...

race sails up to 15 m2. Associated Equipment Mast Boom Fin (similar shape to a surfboard fin but is usually stronger for windsurfing) Universal joint...

balances on, similar to a surfboard but typically much shorter, with two foot-straps that prevent falling off the board and three fins positioned on the bottom...

part of the surfboard, such as the leash plug or center fin box slot. Alternately, some locking devices clamp or strap around the surfboard. Once the board...

and have been printed on clothing and surfboards. Frye is also known for his innovation with foiled surfboard fins. After a surfing trip to Australia in...

Olo board or Olo surfboard (pronounced: IPA: [Oulou], Hawaiian: Hawaiian pronunciation: [O'lo]) is a traditional long Hawaiian surfboard that was used by...

a sharks fin/skeg. The alaia's roots span back a thousand years. Lala is the Hawaiian word describing the action of riding an alaia surfboard. Lala is...

experiment with making better surfboards, revolutionizing board design in the process with lightweight materials and the fin; he was the first to build a...