19-inch rack is a standardized frame or enclosure for mounting multiple electronic equipment modules. Each module has a front panel that is 19 inches...

most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these...

Standard rack systems to support computer, communications, and AV equipment 19-inch rack Open Rack, an alternative standard 23-inch rack, and Rack unit,...

Rack is an Open Compute Project standard for a new rack and power delivery architecture and an efficient, scalable alternative to the EIA-310 19-inch...

of rack mounted electronic equipment, similar to the rack unit (U) used to measure vertical heights of rack mounted equipment. One HP is 0.2 inches (5...

together into a standard chassis which, in turn, can be mounted in a 19-inch rack. The chassis consists of a series of slotted card guides on the top and...

about the right width for a 19-inch rack, it requires at least 14 rack units in height. A third model in a smaller rack-mount case without the large...

adapter bracket. Rack mount computer monitors are available in two styles and are intended to be mounted into a 19-inch rack: Fixed A fixed rack mount monitor...

center post to accommodate sub-rack-sized payloads, such as the 483 mm (19-inch rack) Spacelab Standard Interface Rack (SIR) Drawer or the Space Shuttle...

mouse (pointing device). They are typically constructed to fit into a 19-inch rack although there are manufacturers who offer a KVM that can be mounted...

forth. In many cases, the internal 19-inch rack is mounted to the transit case via shock absorbing mounts giving the rack sway space to attenuate shocks and...

Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration. It was the first commercially available Dutch personal/home...

connectors on Eurocards plugged into female DIN 41612 on the backplane in a 19-inch rack chassis. To support the plug-in card/backplane configuration, the "normal"...

towers, 19-inch racks or blades. In the current naming scheme, towers are designated by T, racks by R, and blades by M (for modular). The 19″ rack-servers...

19-inch rack. Digital's RK05 and RL01 were early examples using single 14-inch platters in removable packs, the entire drive fitting in a 10.5-inch-high...

unit used in 802.11 wireless Rack unit, a measurement of the height of electronic equipment commonly installed in 19-inch racks Ruthenium, symbol Ru, a chemical...

dual socket 1U 19 inch rack-mountable Xeon scalable server equipped with up to four VE cards of type BE A311-8: a dual socket 4U 19 inch rack-mountable Xeon...

4 kVA to 16 kVA. Symmetras are built for use in a data center (in a 19-inch rack for example). They include features such as integrated manageability...

for computers and network switches; often sized for installation in a 19-inch rack. All-in-one PC "Lunchbox" portable computer Hard disk drive form factors...

loop, used in industrial control and automation. 3.5 inch and 2.5 inch hard drives. 19-inch rack standards for telecommunication, server, storage, audio...

occupying slightly more than one half of a standard 19-inch rack. Most of the space in the rack and most of the 1 kW input power were required for the...

A rack rail, or rack strip, is used to mount rackable electronic hardware and 19-inch rack mount accessories within a 19-inch rack. Within a rack a minimum...

it may have a 1/4 inch mono connector. To resolve this problem, DJs can either use adapters or special cables (e.g., RCA to 1/4 inch mono). Heavier-gauge...

means that devices mounted in racks or keyboard instruments can be connected without having to hunt around behind the rack or instrument with a flashlight...

versions produced by Korg, the following features are different or new: 8U 19-inch rack chassis No speakers Digital spring reverb simulation instead of a physical...

ubiquitous Teletype Model 33 ASR. They usually took up one or a few 19-inch rack cabinets, compared with the large mainframes that could fill a room....

synthesize it in real-time, in 1983, took 2 years to design and build a 19-inch rack full of digital hardware and 200,000 lines of system code to run the...

home or office environment outside a wiring closet; rack-mounted switches for use in an equipment rack or an enclosure; DIN rail mounted for use in industrial...

of up to 1024 compute nodes, plus additional I/O nodes, in a standard 19-inch rack, within reasonable limits on electrical power supply and air cooling...

Standard rack can mean: 19-inch rack as used with electrical and electronic equipment. International Standard Payload Rack as used in space stations....