• Thumbnail for Coordinate-measuring machine
    A coordinate-measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object...
    19 KB (2,614 words) - 04:44, 26 November 2024
  • Thumbnail for Cylindrical coordinate measuring machine
    Cylindrical coordinate measuring machine or CCMM, is a special variation of a standard coordinate measuring machine (CMM) which incorporates a moving...
    6 KB (612 words) - 19:12, 12 April 2024
  • Thumbnail for L. S. Starrett Company
    investigators to an alleged fraud issue with a Starrett RapidCheck Coordinate Measuring Machine that Starrett had to replace free-of-charge to customers because...
    10 KB (997 words) - 14:44, 18 December 2024
  • these machines was the inspection of gauges and parts produced by jig grinding. While bearing some resemblance to a coordinate-measuring machine (CMM)...
    4 KB (532 words) - 04:53, 5 March 2024
  • Wotton-under-Edge, England. The company's products include coordinate-measuring machines and machine tool products. It is listed on the London Stock Exchange...
    7 KB (594 words) - 15:17, 9 December 2024
  • Norwegian Metrology Service Coordinate-measuring machine Cylindrical coordinate measuring machine Universal measuring machine Pratt & Whitney Measurement...
    8 KB (486 words) - 10:13, 18 February 2024
  • Thumbnail for Numerical control
    Computer-aided technologies Computer-aided engineering (CAE) Coordinate-measuring machine (CMM) Design for manufacturability Direct numerical control (DNC)...
    30 KB (3,233 words) - 02:38, 14 November 2024
  • Thumbnail for Nanometrology
    accuracy than resolution as compared to research nanometrology. A coordinate measuring machine (CMM) that works at the nanoscale would have a smaller frame...
    22 KB (2,296 words) - 22:55, 28 February 2024
  • Thumbnail for List of measuring instruments
    Level (instrument) Laser line level Spirit level Gyroscope Coordinate-measuring machine This includes basic quantities found in classical- and continuum...
    45 KB (3,620 words) - 14:33, 29 August 2024
  • Thumbnail for Spatial reference system
    A spatial reference system (SRS) or coordinate reference system (CRS) is a framework used to precisely measure locations on the surface of Earth as coordinates...
    15 KB (1,570 words) - 00:35, 6 September 2024
  • Thumbnail for Geographic coordinate system
    A geographic coordinate system (GCS) is a spherical or geodetic coordinate system for measuring and communicating positions directly on Earth as latitude...
    23 KB (2,513 words) - 18:57, 21 December 2024
  • Romer arm (category Measuring instruments)
    A ROMER Arm is a term for a portable coordinate measuring machine ROMER, a company Acquired by the Hexagon AB group, and part of the Manufacturing Intelligence...
    2 KB (325 words) - 17:20, 8 June 2024
  • model or maximum-entropy Markov model Coordinate-measuring machine, a device for dimensional measuring Coordinated management of meaning, a communications...
    2 KB (209 words) - 04:30, 17 May 2023
  • Thumbnail for ACIS
    computer-aided engineering, architecture, engineering and construction, coordinate-measuring machine, 3D animation, and shipbuilding. ACIS provides software developers...
    15 KB (1,763 words) - 16:42, 21 December 2024
  • Thumbnail for 3D scanning
    the part. There are two main types of contact 3D scanners: Coordinate measuring machines (CMMs) which traditionally have 3 perpendicular moving axis...
    82 KB (10,061 words) - 04:05, 7 November 2024
  • location) are normally inspected using calibrated tools such as Coordinate Measuring Machines (CMMs), Vernier calipers, Go/no go gauges, etc. It may also...
    7 KB (883 words) - 06:59, 29 September 2024
  • Thumbnail for Ruby
    locations in mechanical clockworks, or as scanning probe tips in a coordinate measuring machine.[citation needed] Imitation rubies are also marketed. Red spinels...
    37 KB (3,859 words) - 12:29, 16 December 2024
  • Statistical process control (SPC) Computer aided inspection with coordinate-measuring machine (CMM) Tolerance stack-up analysis using PMI models. Success measurements...
    3 KB (331 words) - 06:39, 2 October 2023
  • Thumbnail for Surface plate
    Surface plate (category Metalworking measuring instruments)
    element of a machine such as a coordinate-measuring machine, precision optical assembly, or other high precision scientific & industrial machine. Plates are...
    13 KB (1,688 words) - 21:44, 10 September 2024
  • Thumbnail for Machinist
    Electronic measuring tools based on transducers. Many of these are digital versions of their mechanical predecessors, as with a digital caliper. coordinate measuring...
    14 KB (1,651 words) - 20:39, 19 December 2024
  • Thumbnail for Kite square
    kite square is a device used to measure the "out-of-squareness" of a machining center or coordinate measuring machine. “Square-ness” or “Out-of-Square”...
    2 KB (163 words) - 19:47, 6 May 2021
  • Touch probe (category Metalworking measuring instruments)
    measurements in CNC (Computer Numerical Control) machining processes. They work in a way similar to Coordinate-measuring devices. Probes are used to adjust different...
    5 KB (515 words) - 02:12, 27 September 2024
  • anti-cult association Cylindrical coordinate measuring machine, a special variation of a standard coordinate measuring machine that incorporates a moving table...
    440 bytes (87 words) - 02:15, 3 January 2024
  • Thumbnail for Linear encoder
    inkjet printers and high precision machining tools ranging from digital calipers and coordinate measuring machines to stages, CNC mills, manufacturing...
    15 KB (1,612 words) - 20:31, 5 May 2023
  • Thumbnail for Mitutoyo
    instruments, including optical comparators, form measuring equipment, and coordinate measuring machines (CMMs). As statistical process control (SPC) was...
    10 KB (1,068 words) - 14:27, 4 April 2024
  • Thumbnail for Earth-centered, Earth-fixed coordinate system
    The Earth-centered, Earth-fixed coordinate system (acronym ECEF), also known as the geocentric coordinate system, is a cartesian spatial reference system...
    9 KB (912 words) - 16:39, 14 December 2024
  • programming. The PMI also may be used by tolerance analysis and coordinate-measuring machine (CMM) software applications if the modeling application permits...
    4 KB (474 words) - 08:56, 31 August 2024
  • Thumbnail for Carl Zeiss AG
    systems, including coordinate-measuring machines (CMMs), computed tomography measurement machines (non-medical), optical measuring equipment, metrology...
    66 KB (7,589 words) - 06:52, 18 December 2024
  • Thumbnail for Voronoi diagram
    of circularity/roundness while assessing the dataset from a coordinate-measuring machine. Zeroes of iterated derivatives of a rational function on the...
    46 KB (5,497 words) - 21:22, 17 December 2024
  • Thumbnail for Inspection
    various industries. The portable 3D system is a versatile optical coordinate measuring machine (CMM) with a wide range of capabilities. Highly accurate point...
    14 KB (1,657 words) - 08:05, 11 October 2024