A drawbar or spindle drawbar is a clamping mechanism for toolholders on machine tools. The toolholder or machine taper itself is held by the draw bar and...

exercised in the usual drilling machine or lathe situation, which provides no drawbar to pull the taper into engagement, if a tool is used requiring a high torque...

building Drawbar (haulage), a device for coupling a hauling vehicle to a load Drawbar (machine tool), a device for securing tools e.g. in milling machines A...

A drawbar force gauge is a gauge designed to measure forces on a machine tool's drawbar. These types of machines are found in metalworking, woodworking...

larger manual machines usually use NMTB tooling. This tooling is somewhat similar to CAT tooling but requires a drawbar within the milling machine. Furthermore...

always tractor-mounted implements, either trailed after the tractor by a drawbar or mounted on the three-point hitch. A modern development of the traditional...

the collet's male outer taper, or a sleeve that will hold it. A hollow drawbar passes back through the headstock to its back side, where a closer mechanism...

slabs of steel to add weight to the rear of the machine to aid in heavy dozing applications. A drawbar and CCU (Cable control unit) for pulling towed scrapers...

Morello is featured on Linkin Park's album The Hunting Party on the song "Drawbar", released on June 17, 2014. Morello plays the guitar solo of the song...

tightened, enough force is applied to securely clamp the workpiece or tool. The cap or drawbar threads act as a screw lever, and this leverage is compounded by...

their low gear ratios, they could provide a large drawbar pull. The slow speed of steam-powered machines led farmers to comment that tractors had two speeds:...

tillage equipment are most commonly connected to the tractor via a drawbar. The classic drawbar is simply a steel bar attached to the tractor (or in some cases...

National Museum of American History. It produced 18 horsepower at the drawbar and 30 at the belt. The tractor at the Smithsonian was used at the George...

attached by means of a three-point hitch and driven by a power take-off . Drawbar hookup is also still commonly used worldwide. Draft-animal power is sometimes...

bulldozers in IDF service, has a power of 405–410 horsepower (302–306 kW) and drawbar pull of 71.6 metric tons (about 702 kN). Older generations, such as D9L...

Music technology is the study or the use of any device, mechanism, machine or tool by a musician or composer to make or perform music; to compose, notate...

the song "Rebellion" and Tom Morello of Rage Against the Machine fame on the song "Drawbar". Bennington commented on the collaborations, stating that...

IDF service, has a power of 405 to 410 horsepower (302 to 306 kW) and drawbar pull of 71.6 tonnes-force (702 kN). It has a crew of two, an operator and...

of agricultural tasks previously performed either by separate machines, unwieldy drawbar-mounted trailed equipment, or manual labour. The TE and TO 20...

Avon) Expedition tools, Jerry cans, Pelican cases, Zarges boxes, high lift or New Concept air jacks, sand ladders, axes, ropes, drawbars, spades. Garmin...

row-crop work they needed. The 9N weighed 2,340 pounds (1,060 kg) and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe...

Influence Archived 2012-01-10 at the Wayback Machine". Sound On Sound. SOS Publications. Oct 2001. Print. ""Drawbar Manual v. 1.2". Voce, Inc. n.d. Web. 10...

Chad (May 3, 2015). "Watch Tom Morello Collaborate With Linkin Park on 'Drawbar'". Loudwire. Archived from the original on January 9, 2024. Retrieved February...

Instead of physical drawbars, the Organ section features "drawbuttons" with a set of red LED strips to indicate the position of each drawbar from 0 (fully in)...

A plough or (US) plow (both pronounced /plaʊ/) is a farm tool for loosening or turning the soil before sowing seed or planting. Ploughs were traditionally...

common sets of MIDI controllers for various instrument types, such as drawbar organs and analog synths, or for particular tasks, improving interoperability...

where soil conditions permitted, direct hauling of implements ("off the drawbar") was preferred; in America, this led to the divergent development of the...

Tour Edition Tour of the album An instrumental demo completed with Pro Tools 8, and later the song was given to LPU 8 members as a holiday downloadable...

a secondary frame supporting the front axle on a turning table and the drawbar; a steering lock allows the steering to be fixed when required. Two axles...

modification of the regular military MB, adding a tailgate, lower gearing, a drawbar, and a civilian-style canvas top. The first CJ served as a quick proof-of-concept...