Impedance parameters or Z-parameters (the elements of an impedance matrix or Z-matrix) are properties used in electrical engineering, electronic engineering...

ports: Admittance (y) parameters Impedance (z) parameters Scattering (S) parameters For example, three-port impedance parameters result in the following...

on each port with a purely real resistance. All impedance, currents, voltages and two-port parameters will be assumed to be purely real. For practical...

and detect electrical and impedance changes in the thorax, which are used to measure and calculate cardiodynamic parameters.[citation needed] Four pairs...

Scattering parameters or S-parameters (the elements of a scattering matrix or S-matrix) describe the electrical behavior of linear electrical networks...

Dielectric spectroscopy (which falls in a subcategory of the impedance spectroscopy) measures the dielectric properties of a medium as a function of frequency...

systems generally utilize admittance parameters (Y matrix), impedance parameters (Z matrix), and/or scattering parameters (S matrix) that embodies the full...

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit...

important parameter used to characterize electronic components, electronic circuits, and the materials used to make components. Impedance analysis can...

engineering, other examples being: S-parameters, Z-parameters, H-parameters, T-parameters or ABCD-parameters. A Y-parameter matrix describes the behaviour of...

Thiele/Small parameters (commonly abbreviated T/S parameters, or TSP) are a set of electromechanical parameters that define the specified low frequency...

electrical engineering, the output impedance of an electrical network is the measure of the opposition to current flow (impedance), both static (resistance) and...

Image impedance is a concept used in electronic network design and analysis and most especially in filter design. The term image impedance applies to the...

display multiple parameters including impedances, admittances, reflection coefficients, S n n {\displaystyle S_{nn}\,} scattering parameters, noise figure...

A quarter-wave impedance transformer, often written as λ/4 impedance transformer, is a transmission line or waveguide used in electrical engineering of...

electrical engineering, the input impedance of an electrical network is the measure of the opposition to current (impedance), both static (resistance) and...

magnetic field, in phasor representation. The impedance is, in general, a complex number. In terms of the parameters of an electromagnetic wave and the medium...

referenced separately but collectively as in transmission parameters, propagation parameters, etc. In transmission line theory, α and β are counted among...

Electrical impedance tomography (EIT) is a noninvasive type of medical imaging in which the electrical conductivity, permittivity, and impedance of a part...

The characteristic impedance or surge impedance (usually written Z0) of a uniform transmission line is the ratio of the amplitudes of voltage and current...

single-phase or 3-phase AC power connections. The main parameters for selecting the proper type of LISN are impedance, insertion loss, voltage rating, current rating...

the output impedance. There are many others (see the main article for a full listing), one of these expresses all four parameters as impedances. It is usual...

two impedances or admittances. There are six canonical forms of these representations: impedance parameters, chain parameters, hybrid parameters and their...

where the zmn are called the impedance parameters, or z-parameters. They are so called because they are in units of impedance and relate port currents to...

and an impedance (Zw) of a faradaic reaction. It is commonly used in electrochemical impedance spectroscopy (EIS) for interpretation of impedance spectra...

inductors) and impedance (series capacitors and load-flow reactors) are so common, FACTs devices targeting voltage and impedance parameters are categorized...

parameter sets may be used to model a transistor. These include: Transmission parameters (T-parameters), Hybrid-parameters (h-parameters), Impedance parameters...

(SWR) is a measure of impedance matching of loads to the characteristic impedance of a transmission line or waveguide. Impedance mismatches result in standing...

engineering the reflection coefficient is a parameter that describes how much of a wave is reflected by an impedance discontinuity in the transmission medium...

Impedance control is an approach to dynamic control relating force and position. It is often used in applications where a manipulator interacts with its...