An insertion mount machine or inserter is a device used to insert the leads of electronic components through holes in printed circuit boards. An insertion...
3 KB (375 words) - 19:02, 15 March 2023
Surface-mount technology (SMT) component placement systems, commonly called pick-and-place machines or P&Ps, are robotic machines which are used to place...
12 KB (1,656 words) - 04:34, 18 November 2024
by manual assembly (hand placement) or by the use of automated insertion mount machines. Through-hole technology almost completely replaced earlier electronics...
10 KB (951 words) - 17:28, 15 February 2024
through-hole technology circuits, such as SMT placement equipment, insertion mount machines, and machines for electronic packaging. The company was founded in 1919...
2 KB (147 words) - 16:08, 19 November 2023
be set to one of 26 starting positions when placed in an Enigma machine. After insertion, a rotor can be turned to the correct position by hand, using the...
93 KB (11,252 words) - 11:26, 24 November 2024
by manual assembly (hand placement) or by the use of automated insertion mount machines. A pinhole is a small hole, usually made by pressing a thin, pointed...
23 KB (2,849 words) - 16:04, 16 November 2024
The M1919 saw service as a light infantry, coaxial, mounted, aircraft, and anti-aircraft machine gun by the U.S and many other countries. The M1919 was...
65 KB (8,195 words) - 09:26, 31 October 2024
which it should be mounted. This is usually used for file systems on network servers, rather than relying on events such as the insertion of media, as would...
5 KB (714 words) - 18:40, 8 October 2024
A tamping machine or ballast tamper, informally simply a tamper, is a self-propelled, rail-mounted machine used to pack (or tamp) the track ballast under...
17 KB (2,226 words) - 02:12, 14 May 2023
Observed non-procreative sexual activities include non-copulatory mounting (without insertion, or by a female, or by a younger male who does not yet produce...
53 KB (5,901 words) - 21:31, 18 November 2024
of the machine to prevent loosening when lateral forces are encountered. They are also keyed (see image) to prevent rotation during insertion and removal...
41 KB (5,160 words) - 17:30, 29 August 2024
MG 34 (redirect from MG 34 machine gun)
that the operator could radically transform the machine gun for several purposes by changing its mount, sights and feed mechanism. One of the Einheitsmaschinengewehr...
56 KB (6,953 words) - 01:45, 8 November 2024
above the cortex" that would not necessarily imply extensive surgical insertion but ideally an implant through a vein or artery. He said the long-term...
68 KB (6,439 words) - 21:47, 23 November 2024
Dual in-line package (section Mounting)
EPROM programmers, a zero insertion force socket would be used. DIPs are also used with breadboards, a temporary mounting arrangement for education,...
23 KB (3,277 words) - 19:33, 31 October 2024
Saiga-12 (category Izhevsk machine-building plant products)
vertical insertion system that allow the magazine to be inserted with only one hand. The hinged dustcover with picatinny rail makes mounting optics simpler...
18 KB (1,722 words) - 05:57, 21 October 2024
connector design: Low insertion loss - should not exceed 0.75 dB Typical insertion repeatability, the difference in insertion loss between one plugging...
28 KB (2,557 words) - 16:20, 26 September 2024
(Special Operations Craft) was a marine security, patrol and special forces insertion boat used by the United States Navy and manufactured by VT Halter Marine...
18 KB (2,062 words) - 10:12, 26 June 2024
A bayonet mount (mainly as a method of mechanical attachment, such as fitting a lens to a camera using a matching lens mount) or bayonet connector (for...
15 KB (1,664 words) - 08:11, 29 September 2024
one of the components of solvent-dispersed CS gas, but that the gas insertions had finished nearly one hour before the fire started, and that it was...
184 KB (20,554 words) - 14:45, 24 November 2024
IM-1 (redirect from Intuitive Machines IM-1 Odysseus)
performed its lunar orbit insertion (LOI) on February 21, altering its velocity by 800 m/s (1,800 mph). Intuitive Machines reported the 408-second main...
71 KB (5,500 words) - 14:03, 20 November 2024
Anal sex or anal intercourse is generally the insertion and thrusting of the erect penis into a person's anus, or anus and rectum, for sexual pleasure...
99 KB (10,102 words) - 21:40, 16 October 2024
Riverine is a boat used by the United States Navy to perform short-range insertion and extraction of special operations forces in river and near-shore environments...
7 KB (320 words) - 13:02, 19 October 2024
stead. Insertion of a directory into the stack can cause incoherency in the kernel's file name cache. Renaming a file within a single mounted file system...
9 KB (1,054 words) - 16:06, 2 September 2024
Melchizedek (category Mount Gerizim)
Blenkinsopp has suggested that the story of Melchizedek is an informal insertion into the Genesis narration, possibly inserted in order to give validity...
51 KB (6,150 words) - 03:01, 24 November 2024
in which the Buran orbiter was the payload and the source of the orbit insertion impulse. The launch vehicle had the capacity to place about 100 tonnes...
19 KB (1,708 words) - 22:33, 20 October 2024
Printed circuit board (redirect from Insertion Mount Technology)
Ayob, M.; Kendall, G. (2008). "A Survey of Surface Mount Device Placement Machine Optimisation: Machine Classification". European Journal of Operational...
85 KB (10,667 words) - 22:43, 4 November 2024
Brain–computer interface (redirect from Mind–machine interface)
has suggested that blood-brain barrier leakage, either at the time of insertion or over time, may be responsible for the inflammatory and glial reaction...
145 KB (16,835 words) - 13:45, 17 November 2024
Akatsuki (spacecraft) (section Orbit insertion failure)
initial 18 May scheduled target. Akatsuki was planned to initiate orbit insertion operations by igniting the orbital maneuvering engine at 23:49:00 on 6...
43 KB (3,986 words) - 18:12, 21 October 2024
Metal lathe (redirect from Screw machine (turning center))
allow the insertion of hollow tubular (Morse standard) tapers to reduce the size of the tapered hole, and permit use of centers. On older machines ('50s)...
35 KB (5,056 words) - 01:22, 14 November 2024
[British Military Headquarters in England] that reconnaissance of Mount Kent before insertion of 42 Commando was superfluous. Had D Squadron not been there...
33 KB (4,537 words) - 09:26, 15 October 2024