A terminal node controller (TNC) is a device used by amateur radio operators to participate in AX.25 packet radio networks. It is similar in function to...

Vancouver, British Columbia began producing standardized equipment (Terminal Node Controllers) in quantity for use in amateur packet radio networks. In 2003...

LAN or WAN node that participates on the data link layer must have a network address, typically one for each network interface controller it possesses...

Simple, Stupid) is a protocol for communicating with a serial terminal node controller (TNC) device used for amateur radio. This allows the TNC to combine...

U.S. Theater for the New City, New York City, New York, U.S. Terminal node controller, a device used by amateur radio operators The Nature Conservancy...

operators have connected to AX.25 networks through the use of a terminal node controller, which contains a microprocessor and an implementation of the protocol...

developing ITP after EPSS, although it eventually gave way to Triple-X. Terminal node controller "X.29 : Procedures for the exchange of control information and...

interswitch trunk (IST) lines to other packet-switching nodes, and at least one Terminal Access Controller (TAC).  This article incorporates public domain material...

relaying APRS data. An APRS infrastructure comprises a variety of Terminal Node Controller (TNC) equipment put in place by individual amateur radio operators...

Terminal Access Controller Access-Control System (TACACS, /ˈtækæks/) refers to a family of related protocols handling remote authentication and related...

a computer and a terminal node controller.[citation needed] Software running on the computer drives the terminal node controller.[citation needed] The...

EVDO GSM modem Laptop MiFi Mobile broadband Netbook Smartphones Terminal node controller Tethering "The Purpose and Use of Broadband Modems in Internet...

TLS—Transport Layer Security TLV—Type—length—value tmp—temporary TNC—Terminal Node Controller TNC—Threaded Neill-Concelman connector TPF—Transaction Processing...

Gateway GPRS support node (GGSN). It does this by carrying the subscriber's data from the subscriber's current serving GPRS support node (SGSN) to the GGSN...

PQRSTUVWXYZabcdefghijklmnopqrstuvwxyz". 6PACK, used with some terminal node controllers, uses an alphabet from 0x00 to 0x3f. Bash supports numeric literals...

required, as compared to PACTOR's relatively expensive external terminal node controller. It has two modes, either 500 or 1600 Hertz in bandwidth, and provides...

(amateur radio protocol), a protocol used with amateur radio terminal node controllers Kiss Technology, a Danish entertainment technology company Kisekae...

Communications Controller and Computer Automation LSI-2 computers as nodes. An Intel 80286 based-node was added in 1987. It was called the Beta node. The original...

application conversations). PU1 nodes are terminal controllers such as IBM 6670 or IBM 3767 PU2 nodes are cluster controllers running configuration support programs...

antenna Transceiver: Texas Instruments' CC1120 RF transceiver Terminal node controller: Microchip's PIC microcontroller, which is interfaced with the...

cluster controller, e.g., 3271, 3272, 3274, 3174, using RG-62, 93 ohm, coax cables in a point to point configuration with one dedicated cable per terminal. Data...

Compute Module, System Load Module and a Message Controller. The Compute Module contains redundant SuperNode CPUs to handle call processing and maintenance...

Arizona, in 1981 by a group of amateurs interested in developing a terminal node controller (TNC) for amateur use. Thus, the group was named Tucson Amateur...

interchangeably called nodes, stations or devices. The recommended arrangement of the wires is as a connected series of point-to-point (multidropped) nodes, i.e. a line...

is a session border controller specialized for the network-to-network interface (NNI). A Serving-CSCF (S-CSCF) is the central node of the signaling plane...

include: Network interface controller (NIC): a device connecting a computer to a computer network. Wireless network interface controller: a device connecting...

S-Band to Very high frequency (VHF) down-converter, a VHF radio, a Terminal Node Controller (TNC) and a controlling computer. It is the primary command station...

FASTRAC implementation consists of two receivers, one transmitter, a terminal node controller (TNC), a transmitter relay board, and a receiver relay board. On...

command-ready bit to 1. Controller actions: When the controller notices that the command-ready bit is set, it sets the busy bit to 1. The controller reads the command...

coordinates Lat: 2° 09' 28" S Long: 79° 53' 08" W HERMES has no Terminal Node Controller (TNC), its main job is to convert protocols from one network in...